# changelog

author: Dan Walsh <dwalsh@redhat.com> 1.21.10-1
changelog:
  - More cleanup of fixfiles sed patch
  - Upgrade to latest from NSA
  	* Merged patch for open_init_pty from Manoj Srivastava.


author: Dan Walsh <dwalsh@redhat.com> 1.21.12-1
changelog:
  - More cleanup of fixfiles sed patch
  	* Merged further patches for restorecon/setfiles -e and fixfiles -C.


author: Dan Walsh <dwalsh@redhat.com> 1.21.13-1
changelog:
  - Update from NSA
  	* Merged further change to fixfiles -C from Dan Walsh.
  	* Merged updated fixfiles script from Dan Walsh.
  - Fix error handling of restorecon


author: Dan Walsh <dwalsh@redhat.com> 1.21.17-1
changelog:
  - Update to latest from NSA
  	* Merged new genhomedircon script from Dan Walsh.
  	* Changed load_policy to call sepol_genusers().


author: Dan Walsh <dwalsh@redhat.com> 1.21.18-1
changelog:
  - Update to latest from NSA
  	* Changed load_policy to fall back to the original policy upon
  	  an error from sepol_genusers().


author: Dan Walsh <dwalsh@redhat.com> 1.21.18-2
changelog:
  - Apply Uli patch
  	* The Makefiles should use the -Wall option even if compiled in beehive
  	* Add -W, too
  	* use -Werror when used outside of beehive.  This could also be used unconditionally
  	* setfiles/setfiles.c: fix resulting warning
  	* restorecon/restorecon.c: Likewise
  	* run_init/open_init_pty.c: argc hasn't been checked, the program would crash if
  called without parameters.  ignore the return value of nice properly.
  	* run_init: don't link with -ldl lutil
  	* load_policy: that's the bad bug.  pointer to unsigned int is passed, size_t is
  written to.  fails on 64-bit archs
  	* sestatus: signed vs unsigned problem
  	* newrole: don't link with -ldl


author: Dan Walsh <dwalsh@redhat.com> 1.23.1-1
changelog:
  - Update to released version from NSA
  	* Merged rewrite of genhomedircon by Eric Paris.
  	* Changed fixfiles to relabel jfs since it now supports security xattrs
  	  (as of 2.6.11).  Removed reiserfs until 2.6.12 is released with 
  	  fixed support for reiserfs and selinux.


author: Dan Walsh <dwalsh@redhat.com> 1.23.2-1
changelog:
  - Update to version from NSA
  	* Changed setfiles -c to call set_matchpathcon_flags(3) to
  	  turn off processing of .homedirs and .local.


author: Dan Walsh <dwalsh@redhat.com> 1.23.3-1
changelog:
  - Update to version from NSA
          * Merged context validation patch for genhomedircon from Eric Paris.
  - Fix verbose output of restorecon


author: Dan Walsh <dwalsh@redhat.com> 1.23.4-1
changelog:
  - Update to version from NSA
  	* Merged load_policy is_selinux_enabled patch from Dan Walsh.
  	* Merged restorecon verbose output patch from Dan Walsh.
  	* Merged setfiles altroot patch from Chris PeBenito.


author: Dan Walsh <dwalsh@redhat.com> 1.23.5-1
changelog:
  - Update to match NSA
  	* Reverted load_policy is_selinux_enabled patch from Dan Walsh.
  	  Otherwise, an initial policy load cannot be performed using
  	  load_policy, e.g. for anaconda.


author: Dan Walsh <dwalsh@redhat.com> 1.23.6-1
changelog:
  - Update to match NSA
  	* Fixed signed/unsigned pointer bug in load_policy.
  	* Reverted context validation patch for genhomedircon.


author: Dan Walsh <dwalsh@redhat.com> 1.23.7-1
changelog:
  - Change -f flag in fixfiles to remove stuff from /tmp
  - Change -F flag to pass -F flag  to restorecon/fixfiles.  (IE Force relabel).


author: Dan Walsh <dwalsh@redhat.com> 1.23.9-1
changelog:
  - Update to match NSA
  	* Updated audit2why for sepol_ prefixes on Flask types to
  	  avoid namespace collision with libselinux, and to 
  	  include <selinux/selinux.h> now.


author: Dan Walsh <dwalsh@redhat.com> 1.23.10-1
changelog:
  - Update to match NSA
  	* Extended audit2why to incorporate booleans and local user 
  	  settings when analyzing audit messages.


author: Dan Walsh <dwalsh@redhat.com> 1.23.11-1
changelog:
  - Update to match NSA
  	* Merged fixfiles and newrole patch from Dan Walsh.
  	* Merged audit2why man page from Dan Walsh.


author: Dan Walsh <dwalsh@redhat.com> 1.25.5-1
changelog:
  - Update to match NSA
  	* Merged patch to move module read/write code from libsemanage
  	  to libsepol from Jason Tang (Tresys).


author: Dan Walsh <dwalsh@redhat.com> 1.25.6-1
changelog:
  - Update to match NSA
  	* Merged fixes for semodule_link and sestatus from Serge Hallyn (IBM).
  	  Bugs found by Coverity.


author: Dan Walsh <dwalsh@redhat.com> 1.25.9-1
changelog:
  - Update to match NSA
  	* Changed setfiles -c to translate the context to raw format
  	prior to calling libsepol.


author: Dan Walsh <dwalsh@redhat.com> 1.27.1-1
changelog:
  - Update to match NSA
  	* Merged error shadowing bug fix for restorecon from Dan Walsh.
  	* Merged setfiles usage/man page update for -r option from Dan Walsh.
  	* Merged fixfiles -C patch to ignore :s0 addition on update
  	  to a MCS/MLS policy from Dan Walsh.


author: Dan Walsh <dwalsh@redhat.com> 1.27.2-1
changelog:
  - Update to match NSA
  	* Merged run_init open_init_pty bug fix from Manoj Srivastava
  	  (unblock SIGCHLD).  Bug reported by Erich Schubert.


author: Dan Walsh <dwalsh@redhat.com> 1.27.3-1
changelog:
  - Update to match NSA
  	* Merged patch to update semodule to the new libsemanage API
  	and improve the user interface from Karl MacMillan (Tresys).
  	* Modified semodule for the create/connect API split.


author: Dan Walsh <dwalsh@redhat.com> 1.27.5-1
changelog:
  - Update to match NSA
  	* Fixed warnings in load_policy.
  	* Rewrote load_policy to use the new selinux_mkload_policy()
  	interface provided by libselinux.


author: Dan Walsh <dwalsh@redhat.com> 1.27.6-1
changelog:
  - Update to match NSA
  	* Updated for changes to libsepol. 
  	Changed semodule and semodule_package to use the shared libsepol.
  	Disabled build of semodule_link and semodule_expand for now.
  	Updated audit2why for relocated policydb internal headers,
  	still needs to be converted to a shared lib interface.


author: Dan Walsh <dwalsh@redhat.com> 1.27.7-1
changelog:
  - Update to match NSA
  	* Updated semodule_link and semodule_expand to use shared libsepol.
  	Fixed audit2why to call policydb_init prior to policydb_read (still
  	uses the static libsepol).


author: Dan Walsh <dwalsh@redhat.com> 1.27.11-1
changelog:
  - Update to match NSA
  	* Updated semodule_expand to use get interfaces for hidden sepol_module_package type.
  	* Merged newrole and run_init pam config patches from Dan Walsh (Red Hat).
  	* Merged fixfiles patch from Dan Walsh (Red Hat).
  	* Updated semodule for removal of semanage_strerror.


author: Dan Walsh <dwalsh@redhat.com> 1.27.12-1
changelog:
  - Update to match NSA
  	* Merged non-PAM Makefile support for newrole and run_init from Timothy Wood.


author: Dan Walsh <dwalsh@redhat.com> 1.27.18-1
changelog:
  - Update to match NSA
  	* Cleaned up usage and error messages and releasing of memory by
     	  semodule_* utilities.
  	* Corrected error reporting by semodule.
  	* Updated semodule_expand for change to sepol interface.
  	* Merged fixes for make DESTDIR= builds from Joshua Brindle.


author: Dan Walsh <dwalsh@redhat.com> 1.27.19-1
changelog:
  - Update to match NSA
  	* Merged semodule support for reload, noreload, and store options
  	  from Joshua Brindle.
  	* Merged semodule_package rewrite from Joshua Brindle.


author: Dan Walsh <dwalsh@redhat.com> 1.27.20-1
changelog:
  - Update to match NSA
  	* Merged setsebool patch from Ivan Gyurdiev.
  	  This moves setsebool from libselinux/utils to policycoreutils,
  	  and rewrites it to use libsemanage for permanent boolean changes.


author: Dan Walsh <dwalsh@redhat.com> 1.27.23-1
changelog:
  - Update to match NSA
  	* Changed setfiles for the context canonicalization support.
  	* Changed setsebool to call semanage_is_managed() interface
  	  and fall back to security_set_boolean_list() if policy is
  	  not managed.
  	* Merged setsebool memory leak fix from Ivan Gyurdiev.
  	* Merged setsebool patch to call semanage_set_reload_bools()
  	  interface from Ivan Gyurdiev.


author: Dan Walsh <dwalsh@redhat.com> 1.27.26-1
changelog:
  * Added -B (--build) option to semodule to force a rebuild.
  	* Reverted setsebool patch to call semanage_set_reload_bools().
  	* Changed setsebool to disable policy reload and to call
  	  security_set_boolean_list to update the runtime booleans.
  	* Changed setfiles -c to use new flag to set_matchpathcon_flags()
  	  to disable context translation by matchpathcon_init().


author: Dan Walsh <dwalsh@redhat.com> 1.27.28-2
changelog:
  - Update to match NSA
  	* Merged genhomedircon rewrite from Dan Walsh.
  - Rewrite audit2allow to python


author: Dan Walsh <dwalsh@redhat.com> 1.27.29-1
changelog:
  - Update to match NSA
  	* Merged audit2allow python script from Dan Walsh.
  	  (old script moved to audit2allow.perl, will be removed later).
  	* Merged genhomedircon fixes from Dan Walsh.
  	* Merged semodule quieting patch from Dan Walsh
  	  (inverts default, use -v to restore original behavior).


author: Dan Walsh <dwalsh@redhat.com> 1.27.30-1
changelog:
  - Update to match NSA
  	* Merged sestatus, audit2allow, and semanage patch from Dan Walsh.
  	* Fixed semodule -v option.


author: Dan Walsh <dwalsh@redhat.com> 1.27.31-1
changelog:
  - Update to match NSA
  	* Changed genhomedircon to always use user_r for the role in the
  	  managed case since user_get_defrole is broken.
  - Add te file capabilities to audit2allow
  - Add man pages for semodule


author: Dan Walsh <dwalsh@redhat.com> 1.27.33-1
changelog:
  - Update to match NSA
  	* Merged audit2allow --tefile and --fcfile support from Dan Walsh.
  	* Merged genhomedircon fix from Dan Walsh.
  	* Merged semodule* man pages from Dan Walsh, and edited them.
  	* Changed setfiles to set the MATCHPATHCON_VALIDATE flag to
  	  retain validation/canonicalization of contexts during init.


author: Dan Walsh <dwalsh@redhat.com> 1.27.35-1
changelog:
  - Update to match NSA
  	* Merged genhomedircon bug fix from Dan Walsh.
  	* Revised semodule* man pages to refer to checkmodule and
  	  to include example sections.


author: Dan Walsh <dwalsh@redhat.com> 1.27.36-1
changelog:
  - Update to match NSA
  	* Changed genhomedircon to warn on use of ROLE in homedir_template
  	  if using managed policy, as libsemanage does not yet support it.


author: Dan Walsh <dwalsh@redhat.com> 1.29.1-1
changelog:
  - Update to match NSA
  	* Merged fix for audit2allow long option list from Dan Walsh.
  	* Merged -r option for restorecon (alias for -R) from Dan Walsh.
  	* Merged chcat script and man page from Dan Walsh.


author: Dan Walsh <dwalsh@redhat.com> 1.29.2-1
changelog:
  - Fix genhomedircon to work in installer
  - Update to match NSA
  	* Merged patch for chcat script from Dan Walsh.


author: Dan Walsh <dwalsh@redhat.com> 1.29.3-1
changelog:
  - Update to match NSA
  	* Merged semanage getpwnam bug fix from Serge Hallyn (IBM).
  	* Merged patch series from Ivan Gyurdiev.
  	  This includes patches to:
  	  - cleanup setsebool
  	  - update setsebool to apply active booleans through libsemanage
  	  - update semodule to use the new semanage_set_rebuild() interface
  	  - fix various bugs in semanage
  	* Merged patch from Dan Walsh (Red Hat).
  	  This includes fixes for restorecon, chcat, fixfiles, genhomedircon,
  	  and semanage.


author: Dan Walsh <dwalsh@redhat.com> 1.29.4-1
changelog:
  - Update to match NSA
  	* Merged genhomedircon and semanage patch from Dan Walsh.
  	* Changed semodule error reporting to include argv[0].


author: Dan Walsh <dwalsh@redhat.com> 1.29.7-1
changelog:
  - Update to match NSA
  	* Merged newrole cleanup patch from Steve Grubb.
  	* Merged setfiles/restorecon performance patch from Russell Coker.
  	* Merged genhomedircon and semanage patches from Dan Walsh.
  	* Merged remove add_local/set_local patch from Ivan Gyurdiev.


author: Dan Walsh <dwalsh@redhat.com> 1.29.8-1
changelog:
  - Update to match NSA
  	* Merged semanage fixes from Ivan Gyurdiev.
  	* Merged semanage fixes from Russell Coker.
  	* Merged chcat, genhomedircon, and semanage diffs from Dan Walsh.


author: Dan Walsh <dwalsh@redhat.com> 1.29.11-1
changelog:
  - Added translation support to semanage
  - Update from upstream
  	* Modified newrole and run_init to use the loginuid when
  	  supported to obtain the Linux user identity to re-authenticate,
  	  and to fall back to real uid.  Dropped the use of the SELinux
  	  user identity, as Linux users are now mapped to SELinux users
  	  via seusers and the SELinux user identity space is separate.
  	* Merged semanage bug fixes from Ivan Gyurdiev.
  	* Merged semanage fixes from Russell Coker.
  	* Merged chcat.8 and genhomedircon patches from Dan Walsh.


author: Dan Walsh <dwalsh@redhat.com> 1.29.15-1
changelog:
  - Update from upstream
  	* Merged newrole audit patch from Steve Grubb.
  	* Merged seuser -> seuser local rename patch from Ivan Gyurdiev.
  	* Merged semanage and semodule access check patches from Joshua Brindle.


author: Dan Walsh <dwalsh@redhat.com> 1.29.17-1
changelog:
  - Update from upstream
  	* Merged genhomedircon fix from Dan Walsh.
  	* Merged seusers.system patch from Ivan Gyurdiev.
  	* Merged improve port/fcontext API patch from Ivan Gyurdiev.
  	* Merged genhomedircon patch from Dan Walsh.


author: Dan Walsh <dwalsh@redhat.com> 1.29.20-1
changelog:
  - Update from upstream
  	* Merged seuser/user_extra support patch to semodule_package 
  	  from Joshua Brindle.
  	* Merged getopt type fix for semodule_link/expand and sestatus
  	  from Chris PeBenito.
  - Fix genhomedircon output


author: Dan Walsh <dwalsh@redhat.com> 1.29.23-1
changelog:
  - Update from upstream
  	* Merged newrole -V/--version support from Glauber de Oliveira Costa.
  	* Merged genhomedircon prefix patch from Dan Walsh.
  	* Merged optionals in base patch from Joshua Brindle.


author: Dan Walsh <dwalsh@redhat.com> 1.29.26-1
changelog:
  - Update from upstream
  	* Merged semanage bug fix patch from Ivan Gyurdiev.
  	* Merged improve bindings patch from Ivan Gyurdiev.
  	* Merged semanage usage patch from Ivan Gyurdiev.
  	* Merged use PyList patch from Ivan Gyurdiev.


author: Dan Walsh <dwalsh@redhat.com> 1.30.1-1
changelog:
  - Make audit2allow translate dontaudit as well as allow rules
  - Update from upstream
  	* Merged semanage labeling prefix patch from Ivan Gyurdiev.


author: Dan Walsh <dwalsh@redhat.com> 1.30.4-1
changelog:
  - Update from upstream
  	* Merged audit2allow fixes for refpolicy from Dan Walsh.
  	* Merged fixfiles patch from Dan Walsh.
  	* Merged restorecond daemon from Dan Walsh.
  	* Merged semanage non-MLS fixes from Chris PeBenito.
  	* Merged semanage and semodule man page examples from Thomas Bleher.


author: Dan Walsh <dwalsh@redhat.com> 1.30.6-1
changelog:
  - Add /etc/samba/secrets.tdb to restorecond.conf
  - Update from upstream
  	* Merged semanage prefix support from Russell Coker.
  	* Added a test to setfiles to check that the spec file is
  	  a regular file.


author: Dan Walsh <dwalsh@redhat.com> 1.30.8-1
changelog:
  - Update to upstream
  	* Merged fix warnings patch from Karl MacMillan.
  	* Merged patch from Dan Walsh.
  	  This includes audit2allow changes for analysis plugins,
  	  internationalization support for several additional programs 
  	  and added po files, some fixes for semanage, and several cleanups.
  	  It also adds a new secon utility.


author: Dan Walsh <dwalsh@redhat.com> 1.30.9-1
changelog:
  - Update to upstream
  	* Fixed audit2allow and po Makefiles for DESTDIR= builds.
  	* Merged .po file patch from Dan Walsh.
  	* Merged bug fix for genhomedircon.


author: Dan Walsh <dwalsh@redhat.com> 1.30.10-1
changelog:
  - Update to upstream
  	* Merged patch with updates to audit2allow, secon, genhomedircon,
  	  and semanage from Dan Walsh.


author: James Antill <jantill@redhat.com> 1.30.10-2
changelog:
  - secon fixes for --self-exec etc.
  - secon change from level => sensitivity, add clearance.
  - Add mass relabel AUDIT patch, but disable it until kernel problem solved.


author: Dan Walsh <dwalsh@redhat.com> 1.30.11-1
changelog:
  - Update to upstream
  	* Merged more translations from Dan Walsh.
  	* Merged patch to relocate setfiles to /sbin for early relabel
  	  when /usr might not be mounted from Dan Walsh.
  	* Merged semanage/seobject patch to preserve fcontext ordering in list.
  	* Merged secon patch from James Antill.


author: Dan Walsh <dwalsh@redhat.com> 1.30.14-1
changelog:
  - Update to upstream
  	* Merged fix for setsebool error path from Serge Hallyn.
  	* Merged patch from Dan Walsh with:
  	*    Updated po files.
  	*    Fixes for genhomedircon and seobject.
  	*    Audit message for mass relabel by setfiles.


author: Dan Walsh <dwalsh@redhat.com> 1.30.17-1
changelog:
  - Update to upstream
  	* Lindent.
  	* Merged patch from Dan Walsh with:
  	  * -p option (progress) for setfiles and restorecon.
  	  * disable context translation for setfiles and restorecon.
  	  * on/off values for setsebool.
  	* Merged setfiles and semodule_link fixes from Joshua Brindle.


author: Dan Walsh <dwalsh@redhat.com> 1.30.22-1
changelog:
  - Update to upstream
  	* Merged restorecond size_t fix from Joshua Brindle.
  	* Merged secon keycreate patch from Michael LeMay.
  	* Merged restorecond fixes from Dan Walsh.
  	  Merged updated po files from Dan Walsh.
  	* Merged python gettext patch from Stephen Bennett.
  	* Merged semodule_deps from Karl MacMillan.


author: Dan Walsh <dwalsh@redhat.com> 1.30.25-1
changelog:
  - Update to upstream
  	* Merged patch from Dan Walsh with:
  	  * audit2allow: process MAC_POLICY_LOAD events
  	  * newrole:  run shell with - prefix to start a login shell
  	  * po:  po file updates
  	  * restorecond:  bail if SELinux not enabled
  	  * fixfiles: omit -q 
  	  * genhomedircon:  fix exit code if non-root
  	  * semodule_deps:  install man page
  	* Merged secon Makefile fix from Joshua Brindle.
  	* Merged netfilter contexts support patch from Chris PeBenito.


author: Dan Walsh <dwalsh@redhat.com> 1.30.26-1
changelog:
  - Update to upstream
  	* Merged semanage local file contexts patch from Chris PeBenito.
  - Fix fixfiles log creation
  - More translations


author: Dan Walsh <dwalsh@redhat.com> 1.30.27-4
changelog:
  - Add -i qualified to restorecon to tell it to ignore files that do not exist
  - Fixfiles also modified for this change


author: Dan Walsh <dwalsh@redhat.com> 1.30.28-1
changelog:
  - Security fixes to run python in a more locked down manner
  - More Translations
  - Update to upstream
  	* Merged fix for restorecon // handling from Erich Schubert.
  	* Merged translations update and fixfiles fix from Dan Walsh.


author: Dan Walsh <dwalsh@redhat.com> 1.30.28-6
changelog:
  - Change setfiles and restorecon to use stderr except for -o flag
  - Also -o flag will now output files


author: Dan Walsh <dwalsh@redhat.com> 1.30.30-1
changelog:
  - Update to upstream
  	* Merged newrole auditing of failures due to user actions from
  	  Michael Thompson.


author: Dan Walsh <dwalsh@redhat.com> 1.32-1
changelog:
  - Add newrole audit patch from sgrubb
  - Update to upstream
  	* Merged audit2allow -l fix from Yuichi Nakamura.
  	* Merged restorecon -i and -o - support from Karl MacMillan.
  	* Merged semanage/seobject fix from Dan Walsh.
  	* Merged fixfiles -R and verify changes from Dan Walsh.


author: Dan Walsh <dwalsh@redhat.com> 1.33.4-1
changelog:
  - Upstream accepted my patches
  	* Merged setsebool patch from Karl MacMillan. 
  	  This fixes a bug reported by Yuichi Nakamura with
  	  always setting booleans persistently on an unmanaged system.


author: Dan Walsh <dwalsh@redhat.com> 1.33.6-1
changelog:
  - Update to upstream
  	* Patch from Dan Walsh to add an pam_acct_msg call to run_init
  	* Patch from Dan Walsh to fix error code returns in newrole
  	* Patch from Dan Walsh to remove verbose flag from semanage man page
  	* Patch from Dan Walsh to make audit2allow use refpolicy Makefile
  	  in /usr/share/selinux/<SELINUXTYPE>


author: Dan Walsh <dwalsh@redhat.com> 1.33.6-5
changelog:
  - Update po files
  - Fix newrole to open stdout and stderr rdrw so more will work on MLS machines
  Resolves: #216920


author: Dan Walsh <dwalsh@redhat.com> 1.33.6-6
changelog:
  - Fix audit2allow generating reference policy
  - Fix semanage to manage user roles properly 
  Resolves: #220071


author: Dan Walsh <dwalsh@redhat.com> 1.33.6-7
changelog:
  - add exists switch to semanage to tell it not to check for existance of Linux user
  Resolves: #219421


author: Dan Walsh <dwalsh@redhat.com> 1.33.6-9
changelog:
  - Fix fixfiles script to use tty command correctly.  If this command fails, it 
  should set the LOGFILE to /dev/null
  Resolves: #220879


author: Dan Walsh <dwalsh@redhat.com> 1.33.8-1
changelog:
  - Update to upstream
  	* Merged patches from Dan Walsh to:
  	  - omit the optional name from audit2allow
  	  - use the installed python version in the Makefiles
  	  - re-open the tty with O_RDWR in newrole


author: Dan Walsh <dwalsh@redhat.com> 1.33.10-1
changelog:
  - Update to upstream
  	* Merged patch to correctly handle a failure during semanage handle
  	  creation from Karl MacMillan.
  	* Merged patch to fix seobject role modification from Dan Walsh.


author: Dan Walsh <dwalsh@redhat.com> 1.33.11-1
changelog:
  - Update to upstream
  	* Merged fixfiles and seobject fixes from Dan Walsh.
  	* Merged semodule support for list of modules after -i from Karl MacMillan.


author: Dan Walsh <dwalsh@redhat.com> 1.33.12-1
changelog:
  - Want to update to match api
  - Update to upstream
  	* Merged newrole securetty check from Dan Walsh.
  	* Merged semodule patch to generalize list support from Karl MacMillan.
  Resolves: #200110


author: Dan Walsh <dwalsh@redhat.com> 1.33.14-1
changelog:
  * Merged newrole man page patch from Michael Thompson.
  	* Merged patch to fix python unicode problem from Dan Walsh.


author: Dan Walsh <dwalsh@redhat.com> 1.33.15-1
changelog:
  - Update to upstream
  	* Merged unicode-to-string fix for seobject audit from Dan Walsh.
  	* Merged man page updates to make "apropos selinux" work from Dan Walsh.


author: Dan Walsh <dwalsh@redhat.com> 1.34.1-1
changelog:
  - Fix system-config-selinux ports view
  - Update to upstream
  	* Fixed newrole non-pam build.
  	* Updated version for stable branch.


author: Dan Walsh <dwalsh@redhat.com> 2.0.0-1
changelog:
  - Update to upstream
  	* Merged new audit2allow from Karl MacMillan.
  	  This audit2allow depends on the new sepolgen python module.
  	  Note that you must run the sepolgen-ifgen tool to generate
  	  the data needed by audit2allow to generate refpolicy. 
  	* Fixed newrole non-pam build.
  - Fix Changelog and spelling error in man page


author: Dan Walsh <dwalsh@redhat.com> 2.0.1-1
changelog:
  - Update to upstream
  	* Merged small fix to correct include of errcodes.h in semodule_deps from Dan Walsh.


author: Dan Walsh <dwalsh@redhat.com> 2.0.2-1
changelog:
  - Update to upstream
  	* Merged seobject exception handler fix from Caleb Case.
  	* Merged setfiles memory leak patch from Todd Miller.


author: Dan Walsh <dwalsh@redhat.com> 2.0.3-1
changelog:
  - Update to upstream
  	* Merged translations update from Dan Walsh.
  	* Merged chcat fixes from Dan Walsh.
  	* Merged man page fixes from Dan Walsh.
  	* Merged seobject prefix validity checking from Dan Walsh.
  	* Merged Makefile and refparser.py patch from Dan Walsh.
  	  Fixes PYTHONLIBDIR definition and error handling on interface files.


author: Dan Walsh <dwalsh@redhat.com> 2.0.6-1
changelog:
  - Update to upstream
    - policycoreutils
  	* Merged newrole O_NONBLOCK fix from Linda Knippers.
  	* Merged sepolgen and audit2allow patches to leave generated files 
  	  in the current directory from Karl MacMillan.
  	* Merged restorecond memory leak fix from Steve Grubb.
    -sepolgen
  	* Merged patch to leave generated files (e.g. local.te) in current directory from Karl MacMillan.
  	* Merged patch to make run-tests.py use unittest.main from Karl MacMillan.
  	* Merged patch to update PLY from Karl MacMillan.
  	* Merged patch to update the sepolgen parser to handle the latest reference policy from Karl MacMillan.


author: Dan Walsh <dwalsh@redhat.com> 2.0.6-3
changelog:
  - Update to upstream
    -sepolgen
  	* Merged support for enabling parser debugging from Karl MacMillan.
  - Add sgrupp cleanup of restorcon init script


author: Dan Walsh <dwalsh@redhat.com> 2.0.7-1
changelog:
  - Update to upstream
  	* Merged restorecond init script LSB compliance patch from Steve Grubb.
    -sepolgen
  	* Merged better matching for refpolicy style from Karl MacMillan
  	* Merged support for extracting interface paramaters from interface calls from Karl MacMillan
  	* Merged support for parsing USER_AVC audit messages from Karl MacMillan.


author: Dan Walsh <dwalsh@redhat.com> 2.0.7-5
changelog:
  - Change location of audit2allow and sepol-ifgen to sbin
  - Updated version of sepolgen
  	* Merged patch to move the sepolgen runtime data from /usr/share to /var/lib to facilitate a read-only /usr from Karl MacMillan.


author: Dan Walsh <dwalsh@redhat.com> 2.0.7-6
changelog:
  - Updated version of sepolgen
  	* Merged patch to discard self from types when generating requires from Karl MacMillan.


author: Dan Walsh <dwalsh@redhat.com> 2.0.7-8
changelog:
  - system-config-selinux should be able to run on a disabled system,
  - at least enough to get it enabled.


author: Dan Walsh <dwalsh@redhat.com> 2.0.8-1
changelog:
  - Updated version of sepolgen
  	* Merged updates to sepolgen-ifgen from Karl MacMillan.
  	* Merged updates to sepolgen parser and tools from Karl MacMillan.
  	  This includes improved debugging support, handling of interface 
  	  calls with list parameters, support for role transition rules,
  	  updated range transition rule support, and looser matching.


author: Dan Walsh <dwalsh@redhat.com> 2.0.9-1
changelog:
  - Updated version of sepolgen
  	* Merged seobject setransRecords patch to return the first alias from Xavier Toth.


author: Dan Walsh <dwalsh@redhat.com> 2.0.10-1
changelog:
  - Updated version of policycoreutils
  	* Merged chcat, fixfiles, genhomedircon, restorecond, and restorecon patches from Dan Walsh.


author: Dan Walsh <dwalsh@redhat.com> 2.0.13-1
changelog:
  - Updated version of policycoreutils
  	* Merged setsebool patch to only use libsemanage for persistent boolean changes from Stephen Smalley.
  	* Merged genhomedircon patch to use the __default__ setting from Dan Walsh.
  	* Dropped -b option from load_policy in preparation for always preserving booleans across reloads in the kernel.


author: Dan Walsh <dwalsh@redhat.com> 2.0.15-1
changelog:
  - Updated version of policycoreutils
  	* Merged po file updates from Dan Walsh.
  - Fix semanage to be able to modify prefix in user record


author: Dan Walsh <dwalsh@redhat.com> 2.0.16-1
changelog:
  - Updated version of policycoreutils
  	* Merged support for modifying the prefix via semanage from Dan Walsh.
  - Fixed genhomedircon to find homedirs correctly.


author: Dan Walsh <dwalsh@redhat.com> 2.0.20-1
changelog:
  - Update to match NSA
  	* Merged genhomedircon fixes from Dan Walsh.
  	* Merged setfiles -c usage fix from Dan Walsh.
  	* Merged restorecon fix from Yuichi Nakamura.
  	* Dropped -lsepol where no longer needed.


author: Dan Walsh <dwalsh@redhat.com> 2.0.22-13
changelog:
  - Speed up genhomedircon by an order of magnitude by compiling regex
  - Allow semanage fcontext -a -t <<none>> /path to work


author: Dan Walsh <dwalsh@redhat.com> 2.0.25-1
changelog:
  - Update semodule man page
  	* Fix genhomedircon searching for USER from Todd Miller
  	* Install run_init with mode 0755 from Dan Walsh.
  	* Fix chcat from Dan Walsh.
  	* Fix fixfiles pattern expansion and error reporting from Dan Walsh.	
  	* Optimize genhomedircon to compile regexes once from Dan Walsh.
  	* Fix semanage gettext call from Dan Walsh.


author: Dan Walsh <dwalsh@redhat.com> 2.0.25-13
changelog:
  - Upgrade version of sepolgen from NSA
  	* Expand the sepolgen parser to parse all current refpolicy modules from Karl MacMillan.
  	* Suppress generation of rules for non-denials from Karl MacMillan (take 3).


author: Dan Walsh <dwalsh@redhat.com> 2.0.28-1
changelog:
  - Update to upstream
  	* Update semodule man page for -D from Dan Walsh.
  	* Add boolean, locallist, deleteall, and store support to semanage from Dan Walsh.


author: Dan Walsh <dwalsh@redhat.com> 2.0.29-1
changelog:
  - Update to upstream
  	* Add genhomedircon script to invoke semodule -Bn from Dan Walsh.
  - Add deleteall for ports and fcontext


author: Dan Walsh <dwalsh@redhat.com> 2.0.31-1
changelog:
  - Remove no.po
  - Update to upstream
  	* Fix semodule option handling from Dan Walsh.
  	* Add deleteall support for ports and fcontexts in semanage from Dan Walsh.


author: Dan Walsh <dwalsh@redhat.com> 2.0.33-1
changelog:
  - Upgrade from NSA
  	* Drop verbose output on fixfiles -C from Dan Walsh.
  	* Fix argument handling in fixfiles from Dan Walsh.
  	* Enhance boolean support in semanage, including using the .xml description when available, from Dan Walsh.
  - Fix handling of final screen in polgengui


author: Dan Walsh <dwalsh@redhat.com> 2.0.33-4
changelog:
  - Fix sepolgen to be able to parse Fedora 9 policy
        Handle ifelse statements
        Handle refpolicywarn inside of define
        Add init.if and inetd.if into parse
        Add parse_file to syntax error message


author: Dan Walsh <dwalsh@redhat.com> 2.0.34-1
changelog:
  - Update to upstream
  	* Update Makefile to not build restorecond if
  	  /usr/include/sys/inotify.h is not present


author: Dan Walsh <dwalsh@redhat.com> 2.0.34-2
changelog:
  - Make sepolgen set error exit code when partial failure
  - audit2why now checks booleans for avc diagnosis


author: Dan Walsh <dwalsh@redhat.com> 2.0.35-1
changelog:
  - Update to upstream
  	* Merged support for non-interactive newrole command invocation from Tim Reed.


author: Dan Walsh <dwalsh@redhat.com> 2.0.36-1
changelog:
  - Update to upstream
  	* Merged update to chcat, fixfiles, and semanage scripts from Dan Walsh.
  	* Merged sepolgen fixes from Dan Walsh.


author: Dan Walsh <dwalsh@redhat.com> 2.0.38-1
changelog:
  - Update to upstream
    * Merged audit2allow cleanups and boolean descriptions from Dan Walsh.
    * Merged setfiles -0 support by Benny Amorsen via Dan Walsh.
    * Merged fixfiles fixes and support for ext4 and gfs2 from Dan Walsh.


author: Dan Walsh <dwalsh@redhat.com> 2.0.39-1
changelog:
  - Don't initialize audit2allow for audit2why call.  Use default
  - Update to upstream
  	* Merged fixfiles -C fix from Marshall Miller.


author: Dan Walsh <dwalsh@redhat.com> 2.0.41-1
changelog:
  - Update to upstream
  	* Merged audit2why fix and semanage boolean --on/--off/-1/-0 support from Dan Walsh.
  	* Merged a second fixfiles -C fix from Marshall Miller.


author: Dan Walsh <dwalsh@redhat.com> 2.0.42-1
changelog:
  - Update to upstream
  	* Make semodule_expand use sepol_set_expand_consume_base to reduce
  	  peak memory usage.


author: Dan Walsh <dwalsh@redhat.com> 2.0.43-1
changelog:
  - Update to upstream
  	* Merged fix fixfiles option processing from Vaclav Ovsik.
  - Added existing users, staff and user_t users to polgengui


author: Dan Walsh <dwalsh@redhat.com> 2.0.46-1
changelog:
  - Update to upstream
  	* Update audit2allow to report dontaudit cases from Dan Walsh.
  	* Fix semanage port to use --proto from Caleb Case.


author: Dan Walsh <dwalsh@redhat.com> 2.0.47-1
changelog:
  - Make restorecond not start by default
  - Fix polgengui to allow defining of confined roles.
  - Add patches from Lubomir Rintel <lkundrak@v3.sk> 
    * Add necessary runtime dependencies on setools-console for -gui
    * separate stderr when run seinfo commands
  - Update to upstream
    * Update semanage man page for booleans from Dan Walsh.
    * Add further error checking to seobject.py for setting booleans.


author: Dan Walsh <dwalsh@redhat.com> 2.0.47-2
changelog:
  - Add 	rm -rf /tmp/gconfd-* /tmp/pulse-* /tmp/orbit-* to fixfiles restore
  - So that mislabeled files will get removed on full relabel


author: Dan Walsh <dwalsh@redhat.com> 2.0.49-1
changelog:
  - Update to upstream
  	* Remove security_check_context calls for prefix validation from semanage.
  	* Change setfiles and restorecon to not relabel if the file already has the correct context value even if -F/force is specified.


author: Dan Walsh <dwalsh@redhat.com> 2.0.52-2
changelog:
  - Add lockdown wizard
  - Allow semanage booleans to take an input file an process lots of booleans at once.


author: Dan Walsh <dwalsh@redhat.com> 2.0.53-1
changelog:
  - Update to upstream
  	* Change setfiles to validate all file_contexts files when using -c from Stephen Smalley.


author: Dan Walsh <dwalsh@redhat.com> 2.0.54-1
changelog:
  - Update to upstream
  	* Add support for boolean files and group support for seusers from Dan Walsh.
  	* Ensure that setfiles -p output is newline terminated from Russell Coker.


author: Dan Walsh <dwalsh@redhat.com> 2.0.56-1
changelog:
  - Fix semanage help display
  - Update to upstream
  	* fixfiles will now remove all files in /tmp and will check for
  	  unlabeled_t in /tmp and /var/tmp from Dan Walsh.
  	* add glob support to restorecond from Dan Walsh.
  	* allow semanage to handle multi-line commands in a single transaction
  	  from Dan Walsh.


author: Dan Walsh <dwalsh@redhat.com> 2.0.58-1
changelog:
  - Update to upstream
  	* Allow local file context entries to override policy entries in
  	semanage from Dan Walsh.
  	* Newrole error message corrections from Dan Walsh.
  	* Add exception to audit2why call in audit2allow from Dan Walsh.


author: Dan Walsh <dwalsh@redhat.com> 2.0.61-1
changelog:
  - Update to upstream
  	* chcat: cut categories at arbitrary point (25) from Dan Walsh
  	* semodule: use new interfaces in libsemanage for compressed files
  	  from Dan Walsh
  	* audit2allow: string changes for usage


author: Dan Walsh <dwalsh@redhat.com> 2.0.61-3
changelog:
  - Add Domains Page to system-config-selinux
  - Add ability to create dbus confined applications to polgen


author: Dan Walsh <dwalsh@redhat.com> 2.0.62-1
changelog:
  - Update to upstream
  	* Add btrfs to fixfiles from Dan Walsh.
  	* Remove restorecond error for matching globs with multiple hard links
   	  and fix some error messages from Dan Walsh.
  	* Make removing a non-existant module a warning rather than an error
  	  from Dan Walsh.
  	* Man page fixes from Dan Walsh.


author: Dan Walsh <dwalsh@redhat.com> 2.0.63-1
changelog:
  - Update to upstream
  	* Fix transaction checking from Dan Walsh.
  	* Make fixfiles -R (for rpm) recursive.
  	* Make semanage permissive clean up after itself from Dan Walsh.
  	* add /root/.ssh/* to restorecond.conf


author: Dan Walsh <dwalsh@redhat.com> 2.0.64-1
changelog:
  - Update to upstream
  	* Keep setfiles from spamming console from Dan Walsh.
  	* Fix chcat's category expansion for users from Dan Walsh.
  - Update po files
  - Fix sepolgen


author: Dan Walsh <dwalsh@redhat.com> 2.0.68-1
changelog:
  - Fix location of man pages
  - Update to upstream
  	* Modify setfiles to exclude mounts without seclabel option in
  	/proc/mounts on kernels >= 2.6.30 from Thomas Liu.
  	* Re-enable disable_dontaudit rules upon semodule -B from Christopher
  	Pardy and Dan Walsh.
  	* setfiles converted to fts from Thomas Liu.


author: Dan Walsh <dwalsh@redhat.com> 2.0.70-1
changelog:
  - Update to upstream
  	* Modify restorecon to only call realpath() on user-supplied pathnames
  	from Stephen Smalley.
  	* Fix typo in fixfiles that prevented it from relabeling btrfs 
  	  filesystems from Dan Walsh.


author: Dan Walsh <dwalsh@redhat.com> 2.0.71-1
changelog:
  - Fix chcat to report error on non existing file
  - Update to upstream
  	* Modify setfiles/restorecon checking of exclude paths.  Only check
  	user-supplied exclude paths (not automatically generated ones based on
  	lack of seclabel support), don't require them to be directories, and
  	ignore permission denied errors on them (it is ok to exclude a path to
  	which the caller lacks permission).


author: Ville Skyttä <ville.skytta@iki.fi> - 2.0.71-9
changelog:
  - Don't try to remove restorecond after last erase (done already in %preun).
  - Ensure scriptlets exit with status 0.
  - Fix %post and %pr


author: Dan Walsh <dwalsh@redhat.com> 2.0.73-1
changelog:
  - Update to upstream
          * Add semanage dontaudit to turn off dontaudits from Dan Walsh.
          * Fix semanage to set correct mode for setrans file from Dan Walsh.
          * Fix malformed dictionary in portRecord from Dan Walsh.
  	* Restore symlink handling support to restorecon based on a patch by
  	Martin Orr.  This fixes the restorecon /dev/stdin performed by Debian
  	udev scripts that was broken by policycoreutils 2.0.70.


author: Dan Walsh <dwalsh@redhat.com> 2.0.74-1
changelog:
  - Update to upstream
  	* Change semodule upgrade behavior to install even if the module
  	  is not present from Dan Walsh.
  	* Make setfiles label if selinux is disabled and a seclabel aware
  	  kernel is running from Caleb Case.
  	* Clarify forkpty() error message in run_init from Manoj Srivastava.


author: Dan Walsh <dwalsh@redhat.com> 2.0.74-8
changelog:
  - Add check to sandbox to verify save changes - Chris Pardy
  - Fix memory leak in restorecond - Steve Grubb


author: Dan Walsh <dwalsh@redhat.com> 2.0.74-14
changelog:
  - Allow semanage -i and semanage -o to generate customization files.
  - semanage -o will generate a customization file that semanage -i can read and set a machines to the same selinux configuration


author: Dan Walsh <dwalsh@redhat.com> 2.0.76-1
changelog:
  - Update to upstream
  	* Remove setrans management from semanage, as it does not work
  	  from Dan Walsh.
  	* Move load_policy from /usr/sbin to /sbin from Dan Walsh.


author: Dan Walsh <dwalsh@redhat.com> 2.0.77-1
changelog:
  - Update to upstream
  	* Fixed bug preventing semanage node -a from working
  	  from Chad Sellers
  	* Fixed bug preventing semanage fcontext -l from working
  	  from Chad Sellers
  - Change semanage to use unicode


author: Dan Walsh <dwalsh@redhat.com> 2.0.78-1
changelog:
  - Update to upstream
  	* Remove non-working OUTFILE from fixfiles from Dan Walsh.
  	* Additional exception handling in chcat from Dan Walsh.

  	* fix sepolgen to read a "type 1403" msg as a policy load by Stephen
  	  Smalley <sds@tycho.nsa.gov>
  	* Add support for Xen ocontexts from Paul Nuzzi.


author: Dan Walsh <dwalsh@redhat.com> 2.0.78-14
changelog:
  - Add session capability to sandbox 
  - sandbox -SX -H ~/.homedir -t unconfined_t -l s0:c15 /etc/gdm/Xsession


author: Dan Walsh <dwalsh@redhat.com> 2.0.81-4
changelog:
  - Update to upstream - sepolgen
  	* Add since-last-boot option to audit2allow from Dan Walsh.
  	* Fix sepolgen output to match what Chris expects for upstream
  	  refpolicy from Dan Walsh.


author: Dan Walsh <dwalsh@redhat.com> 2.0.82-7
changelog:
  - Fix crash when args are empty
  Resolves: #582542
  - Fix semange to exit on bad options
  - Fix semanage dontaudit man page section
  Resolves: #582533


author: Dan Walsh <dwalsh@redhat.com> 2.0.82-13
changelog:
  - Make semanage boolean work on disabled machines and during livecd xguest
  - Fix homedir and tmpdir handling in sandbox
  Resolves: #587263


author: Dan Walsh <dwalsh@redhat.com> 2.0.82-17
changelog:
  - Fix policy tool to have correct name in menus
  - Fix seunshare to handle /tmp being in ~/home
  - Fix saving of altered files
  - Update translations


author: Dan Walsh <dwalsh@redhat.com> 2.0.82-23
changelog:
  - Fix seunshare translations
  - Fix seunshare to work on all arches
  - Fix icon for system-config-selinux
  Resolves: #595276


author: Dan Walsh <dwalsh@redhat.com> 2.0.82-27
changelog:
  - Move genhomedircon.8 to same package as genhomedircon
  - Fix sandbox to pass unit test
  Resolves: #595796


author: Dan Walsh <dwalsh@redhat.com> 2.0.83-17
changelog:
  - Apply patch to restorecond from Chris Adams, which will cause restorecond 
  - to watch first user that logs in.


author: Dan Walsh <dwalsh@redhat.com> 2.0.83-19
changelog:
  - Fix sandbox -H and -T regression
  Resolves: #626404
  - Fix fcontext translation handling in system-config-selinux


author: Dan Walsh <dwalsh@redhat.com> 2.0.83-19.9
changelog:
  - selinux-polgengui should not blow up on disabled SELinux system
  Resolves: #695288
  CVE-2011-1011 policycoreutils: insecure temporary directory handling in seunshare
  Resolves: #679690
  check return value of getpwuid()
  Fix semanage module -D' traceback
  Resolves: #666861 
  sandbox -- AttributeError: 'module' object has no attribute 'chcon' 	
  Resolves: #690502 	
  system-config-selinux could not open interface info 	
  Resolves: #696809
  Mv sandbox.conf.5.gz to sandbox.5.gz and put in base package
  Resolves: #690744 
  sestatus usage message not complete (missing -b option) 	
  Resolves: #705027
  correct package name in the -sandbox subpackage description 	
  Resolves: #679798
  dracut attempts to load_policy with SELinux=disabled 	
  Resolves: #659076
  Resolves: #658532
  8 options are not described in semanage man page 	
  Resolves: #677541
  Mention "semanage module" in semanage man page 	 
  Resolves: #677542
  Update translations
  Allow polcycoreutils-gui and tools to run on disabled SELinux systems
  Resolves: #695288 
  Resolves: #689153


author: Dan Walsh <dwalsh@redhat.com> 2.0.83-19.10
changelog:
  - Fix policycoreutils-sandbox description
  - Change sepolgen-ifgen to search all available policy files
  - Fix portspage in system-config-selinux to not crash
  - fix to sandbox 
    - Fix seunshare to use more secure handling of /tmp
      - Rewrite seunshare to make sure /tmp is mounted stickybit owned by root
     - Change to allow sandbox to run on nfs homedirs, add start python script
     - change default location of HOMEDIR in sandbox to /tmp/.sandbox_home_*
     - Move seunshare to sandbox package
     - Fix sandbox to show correct types in  usage statement
  Resolves: #679690
  Resolves: #679689
  Resolves: #677541
  Resolves: #679798
  - Fixes for sepologen 
    - Usage statement needs -n name
    - Names with _ are being prevented
    - dbus apps should get _chat interface
    - Cleaup selinux-polgengui to be a little more modern, fix comments and use selected name
    - Add sandbox to sepolgen
    - Polgengui raises the wrong type of exception.  #471078
  - Cleanup chcat man page
  - Update translations
  - restorecond fixes
    - Have restorecond watch more directories in homedir
    - Fix restorecond watching utmp file for people logging in our out
    - Exit in restorecond if it can not find a UID in the passwd database

  - Stop fixfiles from complaining about missing dirs

  - Semanage fixes
    - Fix up node handling in semanage command
    - Fix proper handling of getopt errors
    - Do not allow modules names to contain spaces
    - Change semanage to not allow it to semanage module -D
  Resolves: #677542
  - Change setsebool to suggest run as root on failure
  - Don't report error on load_policy when system is disabled.
  - Fix unchecked return value of getpwuid()


author: Dan Walsh <dwalsh@redhat.com> 2.0.83-19.11
changelog:
  - Remove sandbox calling -k, only should be used by seunshare, should not be
  called all the time.
  Resolves: #679690
  Resolves: #679689
  Resolves: #677541
  Resolves: #679798


author: Dan Walsh <dwalsh@redhat.com> 2.0.83-19.12
changelog:
  - Back port option handling in semanage to handle semodule module -D correctly
  - Back port manpage from Fedora
  Resolves: #666861


author: Dan Walsh <dwalsh@redhat.com> 2.0.83-19.13
changelog:
  - Fix spec file to require rsync for sandbox
  Resolves: #734467
  - Fix spec file to require gtkhtml2 for lockdown booleans program
  Resolves: #702860
  - Fix bugs found by Coverity
  Resolves: #717640
  Resolves: #728833


author: Miroslav Grepl <mgrepl@redhat.com> 2.0.83-19.15
changelog:
  - Needs require gnome-python2-gtkhtml2 to make system-config-selinux working
  - Not use open_init_pty by default


author: Dan Walsh <dwalsh@redhat.com> 2.0.83-19.16
changelog:
  - Restorecon should not be exiting with a 1 when it is successful in relabeling a file
  Resolves: #740699
  Resolves: #739587


author: Miroslav Grepl <mgrepl@redhat.com> 2.0.83-19.18
changelog:
  - Other fix for semanage man page
  Resolves: #677541
  - Don't report error on load_policy when system is disabled.


author: Dan Walsh <dwalsh@redhat.com> - 2.0.83-19.19
changelog:
  - Change semanage to produce proper audit records for Common Criteria
  - Fix the handling of namespaces in seunshare/sandbox.
  - Currently mounting of directories within sandbox is propogating to the 
  - parent namesspace.
  - restorecond -u needs to watch terminal for exit if run outside of dbus.
  - Fix unchecked return codes
  Related: #785678


author: Dan Walsh <dwalsh@redhat.com> - 2.0.83-19.22
changelog:
  - Make sure installing po files use -p
  - Fix unchecked return codes
  Resolves: #684015
  - Fix semanage is sending the wrong kind of audit events 
  - Fix Polyinstantiated namespace mount leaking to excluded users 
  Related: #786664 
  - Fix selinux-policy update shows error parsing file obj_perm_s... 
  Related: #786191


author: Miroslav Grepl <mgrepl@redhat.com> - 2.0.83-19.25
changelog:
  - Make restorecon to return proper exit codes on failure
  Resolves:#824779
  - Fix generated role_types for *.te
  Resolves:#843727


author: Miroslav Grepl <mgrepl@redhat.com> - 2.0.83-19.27
changelog:
  - Fix restorecond usage
  - Add missing te_stream_rules and if_stream_rules templates
  Resolves:#816460
  - Print a message if no default labels are assigned
  Resolves:#851479


author: Miroslav Grepl <mgrepl@redhat.com> - 2.0.83-19.28
changelog:
  - Allow to define sock file in /etc directory 
  Resolves:#816460
  - Make output of audit2allow when AVC can be allowed by boolean more readable


author: Miroslav Grepl <mgrepl@redhat.com> - 2.0.83-19.30
changelog:
  - Fix restorecond init script
  - Make setools.seinfo working only on SELinux enabled systems in seobjet.py
  Resolves:#893065


author: Miroslav Grepl <mgrepl@redhat.com> - 2.0.83-19.31
changelog:
  - Make setsebool less verbose on errors
  Resolves:#984484
  - Make <<none>> spec working for semanage fcontext
  - Make audit2allow witn o option to append output instead of write


author: Miroslav Grepl <mgrepl@redhat.com> - 2.0.83-19.33
changelog:
  - Fix semanage
  Resolves:#860506
  - Make semanage man page and help consistent
  - Fix setsebool to give better error message on bad boolean names
  - Add support for exclude dirs in fixfiles
  - Fix semanage boolean to require a value


author: Miroslav Grepl <mgrepl@redhat.com> - 2.0.83-19.37
changelog:
  - Add workaround to make allow_polyinstantiation=1 directive working for xguest with semanage-booleans
  Resolves:#1008790


author: Miroslav Grepl <mgrepl@redhat.com> - 2.0.83-19.41
changelog:
  - Allow use sandbox to follow homedirs symlinks
  Resolves:#913175
  - Make sure file equivalance target and source do not end
   with a /
  - Allow make only valid domains as permissive domains
  - Fix polgen.py to allow "_" in a policy file.
  - Implement --noreload option to semanage
  - Add missing long options in sandbox man page


author: Miroslav Grepl <mgrepl@redhat.com> - 2.0.83-19.42
changelog:
  - Fail properly on invalid options for restorecon/setfiles when using -R or -r
  - Check if all files exist for setfiles and restorecon
  - Remove handling of cgroups from sandbox. 
  Resolves:#1091139
  - Make -q and -d options mutually exclusive


author: Miroslav Grepl <mgrepl@redhat.com> - 2.0.83-19.43
changelog:
  - Fix semanage man page to contain also noreload option
  Resolves:#1032828
  - Fix sandbox man page
  - Make setfiles more informative if bad option is given


author: Miroslav Grepl <mgrepl@redhat.com> - 2.0.83-19.46
changelog:
  - Make semanage -i working on empty file
  - Fix setfiles man page
  - Fix setfiles -r option to be working correctly
  Resolves:#1086456


author: Miroslav Grepl <mgrepl@redhat.com> - 2.0.83-19.47
changelog:
  - Fix setfiles man page
  Resolves:#1086456
  - Fix  semanage fcontext  error message when non-existing context given
  Resolves:#1122023


author: Petr Lautrbach <plautrba@redhat.com> 2.0.83-20
changelog:
  - chcat: Change the isSensitivity() detection
  Resolves: rhbz#965397
  - Move sepolgen utility from policycoreutils-gui to policycoreutils-python
  Resolves: rhbz#995778
  - audit2allow: use date time format compatible with ausearch
  Resolves: rhbz#1111999


author: Petr Lautrbach <plautrba@redhat.com> 2.0.83-21
changelog:
  - fixfiles verify: do not relabel /tmp and /var/tmp dirs
  Resolves: rhbz#1113083
  - Fix semanage -S <store> -o <output>
  Resolves: rhbz#1122850


author: Petr Lautrbach <plautrba@redhat.com> 2.0.83-23
changelog:
  - Move python scripts in /usr/share/system-config-selinux to policycoreutils-python
  Resolves: rhbz#995778


author: Petr Lautrbach <plautrba@redhat.com> 2.0.83-26
changelog:
  - restorecond: treat root as a regular user
  Resolves: rhbz#1281877
  - semanage: don't skip reserver_port_t
  Resolves: rhbz#1225806
  - semanage: check if a store exists
  Resolves: rhbz#1208801
  - fixfiles: check the SELinux status
  Resolves: rhbz#1240788


author: Petr Lautrbach <plautrba@redhat.com> 2.0.83-27
changelog:
  - sandbox: Improve comments in sysconfig file
  Resolves: rhbz#1159336
  - secon, newrole: fix inconsistence between --help and man page
  Resolves: rhbz#1278811, rhbz#1278913


author: David Zeuthen <davidz@redhat.com> - 0.94-3
changelog:
  - Add desktop_admin_r and desktop_user_r groups along with a first cut
    of default authorizations for users in these groups.


author: David Zeuthen <davidz@redhat.com> - 0.94-4
changelog:
  - Add some patches from git master
  - Sort pkaction(1) output
  - Bug 23867 – UnixProcess vs. SystemBusName aliasing


author: David Zeuthen <davidz@redhat.com> - 0.95-0.git20090913
changelog:
  - Update to git snapshot
  - Drop upstreamed patches
  - Turn on GObject introspection
  - Don't delete desktop_admin_r and desktop_user_r groups when
    uninstalling polkit-desktop-policy


author: David Zeuthen <davidz@redhat.com> - 0.95-0.git20090913.1
changelog:
  - Add bugfix for polkit_unix_process_new_full() (thanks Bastien Nocera)
  - Obsolete old PolicyKit packages


author: Miloslav Trmač <mitr@redhat.com> - 0.96-6
changelog:
  - Use real --help text and error messages instead of showing a man page in
    pkaction and pkcheck.  Fix description of (pkaction --action-id) in the man 
    page.
    Resolves: #628862
  - Add support for Identity=default in .pkla files
    Resolves: #812684
  - Use a consistent order for .pkla files within a directory.  Based on a patch
    by Jared Jennings <jared.jennings.ctr@eglin.af.mil>.
    Resolves: #864613
  - Build using PIE and relro
    Resolves: #927406


author: Adam Jackson <ajax@redhat.com> 0.8.0-3
changelog:
  - poppler-0.8.0-ocg-crash.patch: Fix a crash when no optional content
    groups are defined.
  - Mangle configure to account for the new directory for qt3 libs.
  - Fix grammar in %description.


author: Marek Kasik <mkasik@redhat.com> - 0.12.3-3
changelog:
  - Correct %changelog
  - Correct permissions of goo/GooTimer.h
  - Convert pdftohtml.1 to utf8
  - Related: #543948


author: Marek Kasik <mkasik@redhat.com> - 0.12.3-4
changelog:
  - Fix text selection
  - Add patch poppler-0.12.3-text-selection.patch by Brian Ewins
  - Add patch poppler-0.12.3-text-selection-tables.patch by Marek Kasik
  - Make Provides/Obsoletes versioned
  - Add requirement of poppler-data
  - Resolves: #557812


author: Marek Kasik <mkasik@redhat.com> - 0.12.4-4
changelog:
  - Add poppler-0.12.4-CVE-2010-3702.patch
      (Properly initialize parser)
  - Add poppler-0.12.4-CVE-2010-3703.patch
      (Properly initialize stack)
  - Add poppler-0.12.4-CVE-2010-3704.patch
      (Fix crash in broken pdf (code < 0))
  - Resolves: #639860


author: Robert Scheck <robert@fedoraproject.org> 1.12-2
changelog:
  - Move libpopt to /lib[64] (#249814)
  - Generate API documentation, added buildrequirement to doxygen


author: Robert Scheck <robert@fedoraproject.org> 1.12-3
changelog:
  - Added buildrequirement to graphviz (#249352)
  - Backported bugfixes from CVS (#102254, #135428 and #178413)


author: Robert Scheck <robert@fedoraproject.org> 1.13-1
changelog:
  - Upgrade to 1.13 (#290531, #332201, #425803)
  - Solved multilib problems at doxygen generated files (#342921)


author: Tim Waugh <twaugh@redhat.com> 0.0.1-1
changelog:
  - Default permissions for directories.
  - Initscript should not be marked config.
  - Fixed license tag.
  - Better buildroot tag.


author: Tim Waugh <twaugh@redhat.com> 0.0.1-2
changelog:
  - More consistent use of macros.
  - Build requires xmlto.
  - Don't use %makeinstall.
  - No need to run make check.


author: Tim Waugh <twaugh@redhat.com> 0.0.3-1
changelog:
  - 0.0.3:
    - Allow multiple services to be defined in a single configuration
      file.
    - Allow protocol specifications, e.g. ipp/udp.


author: Tim Waugh <twaugh@redhat.com> 0.0.4-1
changelog:
  - 0.0.4:
    - Fixed initscript so that it will not be reordered to start after
      rpcbind (bug #487250).


author: Tim Waugh <twaugh@redhat.com> 0.0.4-7
changelog:
  - Fix small memory leak and move malloc() check close to call (bug #718176).
  - Requires chkconfig (bug #712362).


author: Bernhard Rosenkraenzer <bero@redhat.com> 1.1.2-1
changelog:
  - Initial Red Hat Linux packaging, based on spec file from
    Simon J Mudd <sjmudd@pobox.com>
  - Changes from that:
    - Set up chroot environment in triggers to make sure we catch glibc errata
    - Remove some hacks to support building on all sorts of distributions at
      the cost of specfile readability
    - Remove postdrop group on deletion


author: Bernhard Rosenkraenzer <bero@redhat.com> 1.1.3-1
changelog:
  - 1.1.3, TLS 0.8.3
  - Fix updating
  - Don't run the statistics cron job
  - remove requirement on perl Date::Calc


author: Bernhard Rosenkraenzer <bero@redhat.com> 1.1.3-2
changelog:
  - listen on 127.0.0.1 only by default (#60071)
  - Put config samples in %{_docdir}/%{name}-%{version} rather than
    /etc/postfix (#60072)
  - Some spec file cleanups


author: Nalin Dahyabhai <nalin@redhat.com> 1.1.3-3
changelog:
  - adjust the default postfix-files config file to match the alternatives setup
    by altering the arguments passed to post-install in the %install phase
    (otherwise, it might point to sendmail's binaries, breaking it rather rudely)
  - adjust the post-install script so that it silently uses paths which have been
    modified for use with alternatives, for upgrade cases where the postfix-files
    configuration file isn't overwritten
  - don't forcefully strip files -- that's a build root policy
  - remove hard requirement on openldap, library dependencies take care of it
  - redirect %postun to /dev/null
  - don't remove the postfix user and group when the package is removed


author: Bernhard Rosenkraenzer <bero@redhat.com> 1.1.4-1
changelog:
  - 1.1.4
  - TLS 0.8.4
  - Move postalias run from %post to init script to work around
    anaconda being broken.


author: Phil Knirsch <pknirsch@redhat.com>
changelog:
  - Fixed missing smtpd.conf file for SASL support and included SASL Postfix
    Red Hat HOWTO (#62505).
  - Included SASL2 support patch (#68800).


author: Karsten Hopp <karsten@redhat.de>
changelog:
  - fix shell in /etc/passwd (#68373)
  - fix documentation in /etc/postfix (#65858)
  - Provides: /usr/bin/newaliases (#66746)
  - fix autorequires by changing /usr/local/bin/perl to /usr/bin/perl in a
    script in %doc (#68852), although I don't think this is necessary anymore


author: John Dennis <jdennis@finch.boston.redhat.com>
changelog:
  - upgrade to release 2.0.6
  - remove chroot as this is now the preferred installation according to Wietse Venema, the postfix author


author: John Dennis <jdennis@finch.boston.redhat.com>
changelog:
  - upgrade to new 2.0.11 upstream release
  - fix authentication problems
  - rewrite SASL documentation
  - upgrade to use SASL version 2
  - Fix bugs 75439, 81913 90412, 91225, 78020, 90891, 88131


author: John Dennis <jdennis@finch.boston.redhat.com> 2:2.0.16-3
changelog:
  - add zlib-devel build prereq, fixes bug 112822
  - remove copy of resolve.conf into chroot jail, fixes bug 111923


author: John Dennis <jdennis@finch.boston.redhat.com> 2:2.0.16-4
changelog:
  - remove mysqlclient prereq, fixes bug 101779
  - remove md5 verification override, this fixes bug 113370. Write parse-postfix-files
    script to generate explicit list of all upstream files with ownership, modes, etc.
    carefully add back in all other not upstream files, files list is hopefully
    rock solid now.


author: John Dennis <jdennis@porkchop.devel.redhat.com>
changelog:
  - revert back to v1 of sasl because LDAP still links against v1 and we can't 
  - bump revision for build
    have two different versions of the sasl library loaded in one load image at
    the same time. How is that possible? Because the sasl libraries have different 
    names (libsasl.so & libsasl2.so) but export the same symbols :-(
    Fixes bugs 115249 and 111767


author: John Dennis <jdennis@porkchop.devel.redhat.com>
changelog:
  - set sasl back to v2 for mainline, this is good for fedora and beyond,
    for RHEL3, we'll branch and set set sasl to v1 and turn off ipv6


author: John Dennis <jdennis@finch.boston.redhat.com> 2:2.0.18-1
changelog:
  - bring source up to upstream release 2.0.18
  - include pflogsumm, fixes bug #68799
  - include smtp-sink, smtp-source man pages, fixes bug #118163


author: John Dennis <jdennis@redhat.com> 2:2.0.18-4
changelog:
  - remove version from pflogsumm subpackage, it was resetting the
    version used in the doc directory, fixes bug 119213


author: Thomas Woerner <twoerner@redhat.com> 2:2.1.1-3.1
changelog:
  - fixed directory permissions in %doc (#125406)
  - fixed missing spool dirs (#125460)
  - fixed verify problem for aliases.db (#125461)
  - fixed bogus upgrade warning (#125628)
  - more spec file cleanup


author: Thomas Woerner <twoerner@redhat.com> 2:2.1.4-1
changelog:
  - new version 2.1.4
  - new ipv6 and tls+ipv6 patches: 1.25-pf-2.1.4
  - new pfixtls-0.8.18-2.1.3-0.9.7d patch


author: Thomas Woerner <twoerner@redhat.com> 2:2.1.5-2
changelog:
  - switched over to system aliases file and database in /etc/ (#117661)
  - new reuires and buildrequires for setup >= 2.5.36-1


author: Thomas Woerner <twoerner@redhat.com> 2:2.1.5-2.2
changelog:
  - automated postalias call in init script
  - removed postconf call from spec file: moved changes into patch


author: Thomas Woerner <twoerner@redhat.com> 2:2.1.5-5.1
changelog:
  - fixed open relay bug in postfix ipv6 patch: new version 1.26 (#146731)
  - fixed permissions on doc directory (#147280)
  - integrated fixed fqdn patch from Joseph Dunn (#139983)


author: Thomas Woerner <twoerner@redhat.com> 2:2.2.0-1
changelog:
  - new version 2.2.0
  - cleanup of spec file: removed external TLS and IPV6 patches, removed 
    smtp_sasl_proto patch
  - dropped samples directory till there are good examples again (was TLS and
    IPV6)
  - v2.2.0 fixes code problems: #132798 and #137858


author: Thomas Woerner <twoerner@redhat.com> 2:2.2.5-2.1
changelog:
  - replaced postconf and postalias call in initscript with newaliases (#156358)
  - fixed initscripts messages (#155774)
  - fixed build problems when sasl is disabled (#164773)
  - fixed pre-definition of mailbox_transport lmtp socket path (#122910)


author: Thomas Woerner <twoerner@redhat.com> 2:2.2.10-1
changelog:
  - new version 2.2.10
  - added option LDAP_DEPRECATED to support deprecated ldap functions for now
  - fixed build without pflogsumm support (#188470)


author: Thomas Woerner <twoerner@redhat.com> 2:2.3.2-1
changelog:
  - new version 2.3.2 with major upstream fixes:
    - corrupted queue file after a request to modify a short message header
    - panic after spurious Milter request when a client was rejected
    - maked the Milter more tolerant for redundant "data cleanup" requests
  - applying pflogsumm-conn-delays-dsn-patch from postfix tree to pflogsumm


author: Thomas Woerner <twoerner@redhat.com> 2:2.3.6-1
changelog:
  - new version 2.3.6
  - limiting SASL mechanisms to plain login for sasl with saslauthd (#175259)
  - dropped usage of ed in the install stage


author: Thomas Woerner <twoerner@redhat.com> 2:2.4.3-1
changelog:
  - new stable version 2.4.3
  - enabled mysql support (rhbz#185515)
  - dropped build requirements for gawk, ed and sed


author: Thomas Woerner <twoerner@redhat.com> 2:2.4.3-2
changelog:
  - diabled mysql support again (rhbz#185515)
  - added support flag for PostgreSQL build (rhbz#180579)
    Ben: Thanks for the patch
  - Fixed remaining rewiew problems (rhbz#226307)


author: Thomas Woerner <twoerner@redhat.com> 2:2.4.5-2
changelog:
  - made init script lsb conform (#243286, rhbz#247025)
  - added link to postfix sasl readme into Postfix-SASL-RedHat readme


author: Thomas Woerner <twoerner@redhat.com> 2:2.4.5-3
changelog:
  - fixed multilib conflict for makedefs.out: rename to makedefs.out-x86_64
    (rhbz#342941)
  - enabled mysql support


author: Thomas Woerner <twoerner@redhat.com> 2:2.4.6-1
changelog:
  - new verison 2.4.6
  - added virtual server(smtp) provide (rhbz#380631)
  - enabling IPv6 support (rhbz#197105)
  - made the MYSQL and PGSQL defines overloadable as build argument


author: Thomas Woerner <twoerner@redhat.com> 2:2.5.1-2
changelog:
  - fixed fix for enabling IPv6 support (rhbz#437024)
  - added new postfix data directory (rhbz#437042)


author: Thomas Woerner <twoerner@redhat.com> 2:2.5.1-3
changelog:
  - fixed postfix privilege problem with symlinks in the mail spool directory
    (CVE-2008-2936) (rhbz#459101)


author: Miroslav Lichvar <mlichvar@redhat.com> 2:2.5.5-2
changelog:
  - enable Large file support on 32-bit archs (#428996)
  - fix mailq(1) and newaliases(1) man pages (#429501)
  - move pflogsumm and qshape to -perl-scripts subpackage (#467529)
  - update pflogsumm to 1.1.1
  - fix large-fs patch
  - drop open_define patch
  - add -Wno-comment to CFLAGS


author: Miroslav Lichvar <mlichvar@redhat.com> 2:2.5.6-1
changelog:
  - update to 2.5.6 (#479108)
  - rebuild /etc/aliases.db only when necessary (#327651)
  - convert doc files to UTF-8


author: Miroslav Lichvar <mlichvar@redhat.com> 2:2.6.1-1
changelog:
  - update to 2.6.1
  - move non-config files out of /etc/postfix (#490983)
  - fix multilib conflict in postfix-files (#502211)
  - run chroot-update script in init script (#483186)
  - package examples (#251677)
  - provide all alternatives files
  - suppress postfix output in post script


author: Miroslav Lichvar <mlichvar@redhat.com> 2:2.6.6-1
changelog:
  - update to 2.6.6 (#588781)
  - move sasl config to /etc/sasl2 (#574439)
  - drop sasl v1 support
  - require Date::Calc for pflogsumm (#588726)


author: Jaroslav Škarvada <jskarvad@redhat.com> - 2:2.6.6-7
changelog:
  - Backported patch to use long integers for message_size_limit,
    mailbox_size_limit and virtual_mailbox_limit
    Resolves: rhbz#907387


author: Jaroslav Škarvada <jskarvad@redhat.com> - 2:2.6.6-8
changelog:
  - Backported support for TLS 1.1, TLS 1.2
    Resolves: rhbz#1287192
  - Preserve timestamps for configuration files
    Resolves: rhbz#1307066


author: Kaj J. Niemi <kajtzu@fi.basen.net> 7.4-0.1
changelog:
  - 7.4
  - Fixed Patch #1 (now rpm-pgsql-7.4.patch)
  - Fixed Patch #2 (now rpm-multilib-7.4.patch):
  - Patch #4 is unnecessary (upstream)
  - Fixed Patch #6 (now postgresql-7.4-src-tutorial.patch)
  - Added Patch #8 (postgresql-7.4-com_err.patch) as com_err()
    is provided by e2fsprogs and CPPFLAGS gets lost somewhere
    inside configure (bad macro?)
  - No 7.4 PDF docs available yet (Source #17)
  - PyGreSQL is separated from the upstream distribution but
    we include it as usual (Source #18)
  - Default to compiling libpq and ECPG as fully thread-safe

  - 7.4 Origin.  See previous spec files for previous history. Adapted
  - from Red Hat and PGDG's 7.3.4 RPM, directly descended from 
  - postgresql-7.3.4-2 as shipped in Fedora Core 1.


author: Lamar Owen <lowen@pari.edu> <lamar.owen@wgcr.org>
changelog:
  - 7.4-0.1PGDG
  - Development JDBC jars in addition to the 7.3 jars; will replace the
  - 7.3 jars once 7.4 official jars are released.
  - Changed to use the bzip2 source to save a little size.
  - Removed some commented out portions of the specfile.
  - Removed the 7.3.4 PDF docs.  Will replace with 7.4 PDF's once they
  - are ready.


author: David Jee <djee@redhat.com> 7.4-4
changelog:
  - Add PyGreSQL patch for deprecated column pg_type.typprtlen [Bug #111263]
  - Add headers patch which moves ecpg headers to /usr/include/ecpg
    [Bug #111195]


author: Lamar Owen <lowen@pari.edu>
changelog:
  - 7.4.1-1PGDG
  - Merge Sander Steffann's changes up to 7.4-0.5PGDG
  - Proper 7.4.1 JDBC jars this time.
  - Patch for no pl/python from Alvaro


author: Tom Lane <tgl@redhat.com> 7.4.2-1
changelog:
  - Update to PostgreSQL 7.4.2; sync with community SRPM as much as possible.
  - Support PGOPTS from /etc/sysconfig/pgsql, per bug 111504.
  - Fix permissions on /etc/sysconfig/pgsql, per bug 115278.
  - SELinux patch in init file: always su </dev/null, per bug 117901.
  - Rebuilt


author: Tom Lane <tgl@redhat.com> 7.4.3-1
changelog:
  - Update to PostgreSQL 7.4.3.
  - Uninstalling server RPM stops postmaster first, per bug 114846.
  - Fix su commands to not assume PG user's shell is sh-like, per bug 124024.
  - Fix permissions on postgresql-python doc files, per bug 124822.
  - Minor postgresql.init improvements.


author: Tom Lane <tgl@redhat.com> 7.4.3-3
changelog:
  - Undo ill-considered chkconfig change that causes server to start
    immediately upon install.  Mea culpa (bug 127552).


author: Tom Lane <tgl@redhat.com> 7.4.5-1
changelog:
  - Update to PostgreSQL 7.4.5.
  - Update JDBC jars to driver build 215.
  - Add Obsoletes: entries for rh-postgresql packages, per bug 129278.


author: Tom Lane <tgl@redhat.com> 7.4.5-3
changelog:
  - Solve the stale lockfile problem (bugs 71295, 96981, 134090)
  - Use runuser instead of su for SELinux (bug 134588)


author: Tom Lane <tgl@redhat.com> 7.4.5-4
changelog:
  - Remove contrib/oidjoins stuff from installed fileset; it's of no use
    to ordinary users and has a security issue (bugs 136300, 136301)
  - adjust chkconfig priority (bug 128852)


author: Tom Lane <tgl@redhat.com> 7.4.6-1
changelog:
  - Update to PostgreSQL 7.4.6 (bugs 136947, 136949)
  - Make init script more paranoid about mkdir step of initializing a new
    database (bugs 136947, 136949)


author: Tom Lane <tgl@redhat.com> 7.4.6-3
changelog:
  - Update to PyGreSQL 3.6 (to fix bug #142711)
  - Adjust a few file permissions (bug #142431)
  - Assign %{_libdir}/pgsql to base package instead of -server (bug #74003)


author: Tom Lane <tgl@redhat.com> 8.0.0-1
changelog:
  - Update to PostgreSQL 8.0.0, PyGreSQL 3.6.1, pgtcl 1.5.2,
    and jdbc driver build 309.
  - Extensive cleanout of obsolete cruft in patch set.
  - Regression tests are run during RPM build (NOTE: cannot build as root when
    this is enabled).
  - Postmaster stderr goes someplace useful, not /dev/null (bz#76503, #103767)
  - Make init script return a useful exit status (bz#80782)
  - Move docs' tutorial directory to %{_libdir}/pgsql/tutorial, since it
    includes .so files that surely do not belong under /usr/share.
  - Remove useless .sgml files from docs RPM (bz#134450)
  - Put regression tests under /usr/lib64 on 64-bit archs, since .so files
    are not architecture-independent.


author: Tom Lane <tgl@redhat.com> 8.0.1-2
changelog:
  - Repair improper error message in init script when PGVERSION doesn't match.
  - Arrange for auto update of version embedded in init script.


author: Tom Lane <tgl@redhat.com> 8.0.1-4
changelog:
  - Attach Obsoletes: declarations for rh-postgresql to subpackages (bz#144435)
  - Make Requires: and Prereq: package linkages specify release not only
    version, as per recent mailing list discussion.


author: Tom Lane <tgl@redhat.com> 8.0.3-1
changelog:
  - Update to PostgreSQL 8.0.3 (includes security and data-loss fixes; see
    bz#156727, CAN-2005-1409, CAN-2005-1410)
  - Update to jdbc driver build 311
  - Recreate postgres user after superseding an rh-postgresql install (bug #151911)
  - Ensure postgresql server is restarted if running during an upgrade


author: Tom Lane <tgl@redhat.com> 8.0.4-1
changelog:
  - Update to PostgreSQL 8.0.4, PyGreSQL 3.6.2, and jdbc driver build 312
  - Adjust pgtcl link command to ensure it binds to correct libpq (bug #166665)
  - Remove obsolete Conflicts: against other python versions (bug #166754)
  - Add /etc/pam.d/postgresql (bug #167040)
  - Include contrib/xml2 in build (bug #167492)


author: Tom Lane <tgl@redhat.com> 8.1.0-1
changelog:
  - Update to PostgreSQL 8.1.0, PyGreSQL 3.7, and jdbc driver build 404
  - Fix PAM config file (must have account not only auth) (bug #167040)
  - Add BuildPrereq: libxslt-devel (bug #170141)
  - Sync with PGDG SRPM as much as feasible


author: Tom Lane <tgl@redhat.com> 8.1.1-1
changelog:
  - Update to PostgreSQL 8.1.1
  - Make pg_config.h architecture-independent for multilib installs;
    put the original pg_config.h into pg_config_$ARCH.h


author: Tom Lane <tgl@redhat.com> 8.1.1-3
changelog:
  - fix pg_config.h for 64-bit and ppc platforms
  - update Makefile.regress (needs to --load-language=plpgsql)


author: Tom Lane <tgl@redhat.com> 8.1.2-1
changelog:
  - Update to PostgreSQL 8.1.2
  - Repair extraneous quote in pgtcl configure script ... odd that bash
    didn't use to spit up on this.


author: Tom Lane <tgl@redhat.com> 8.1.3-1
changelog:
  - Update to PostgreSQL 8.1.3 (fixes bug #180617, CVE-2006-0553)
  - Update to jdbc driver build 405
  - Modify multilib header hack to not break non-RH arches, per bug #177564


author: Tom Lane <tgl@redhat.com> 8.1.4-1
changelog:
  - Update to PostgreSQL 8.1.4 (includes fixes for CVE-2006-2313, CVE-2006-2314;
    see bug #192173)
  - Update to PyGreSQL 3.8
  - Suppress noise from chcon, per bug #187744


author: Tom Lane <tgl@redhat.com> 8.2.0-1
changelog:
  - Update to PostgreSQL 8.2.0
  - Update to PyGreSQL 3.8.1
  - Fix chcon arguments in test/regress/Makefile
  Related: #201035
  - Adjust init script to not fool /etc/rc.d/rc
  Resolves: #161470
  - Change init script to not do initdb automatically, but require
    manual "service postgresql initdb" for safety.  Per upstream discussions.


author: Tom Lane <tgl@redhat.com> 8.2.1-1
changelog:
  - Update to PostgreSQL 8.2.1
  - Update to pgtcl 1.5.3
  - Be sure we link to libncurses, not libtermcap which is disappearing in Fedora


author: Tom Lane <tgl@redhat.com> 8.2.1-2
changelog:
  - Split -pl subpackage into three new packages to reduce dependencies
    and track upstream project's packaging.


author: Tom Lane <tgl@redhat.com> 8.2.4-2
changelog:
  - Fix oversight in postgresql-test makefile: pg_regress isn't a shell script
    anymore.  Per upstream bug 3398.


author: Tom Lane <tgl@redhat.com> 8.2.4-4
changelog:
  - Use tzdata package's data files instead of private copy, so that
    postgresql-server need not be turned for routine timezone updates
  - Don't remove postgres user/group during RPM uninstall, per Fedora
    packaging guidelines
  - Seems we need an explicit BuildRequires on gawk now
  - Rebuild to fix Fedora toolchain issues


author: Tom Lane <tgl@redhat.com> 8.2.4-5
changelog:
  - Use nicer solution for tzdata file substitution: upstream discussion
    concluded that hardwiring the path was better than a symlink after all.


author: Tom Lane <tgl@redhat.com> 8.2.6-1
changelog:
  - Update to PostgreSQL 8.2.6 to fix CVE-2007-4769, CVE-2007-4772,
    CVE-2007-6067, CVE-2007-6600, CVE-2007-6601
  - Make initscript and pam config files be installed unconditionally;
    seems new buildroots don't necessarily have those directories in place


author: Tom Lane <tgl@redhat.com> 8.3RC2-1
changelog:
  - Update to PostgreSQL 8.3RC2 (not waiting for 8.3.0 because Fedora 9 alpha
    should be 8.3-based not 8.2-based).
  - Update to pgtcl 1.6.2


author: Tom Lane <tgl@redhat.com> 8.3.1-2
changelog:
  - Clean up cross-subpackage Requires: to ensure that updating any one
    subpackage brings in the matching versions of others.
  Resolves: #444271


author: Tom Lane <tgl@redhat.com> 8.3.1-4
changelog:
  - Enable LDAP support
  Resolves: #445315
  - Use -Wl,--as-needed to suppress bogus dependencies for libraries that
    are really only needed by some of the subpackages


author: Tom Lane <tgl@redhat.com> 8.3.3-1
changelog:
  - Update to PostgreSQL 8.3.3.
  - Remove postgresql-prefer-ncurses.patch, no longer needed in recent
    Fedora releases because libtermcap is gone.


author: Tom Lane <tgl@redhat.com> 8.3.3-2
changelog:
  - Install Pgtcl in /usr/lib/tcl$TCL_VERSION, not directly in /usr/lib.
    Needed because tcl 8.5 no longer puts /usr/lib into its package search path.
    NOTE: do not back-port this change into branches using pre-8.5 tcl, because
    /usr/lib/tcl8.4 had been a symlink to /usr/share/tcl8.4, and /usr/share
    is exactly where we must not put Pgtcl.
  Resolves: #228263


author: Tom Lane <tgl@redhat.com> 8.3.5-1
changelog:
  - Update to PostgreSQL 8.3.5.
  - Improve display from init script's initdb action, per Michael Schwendt


author: Tom Lane <tgl@redhat.com> 8.3.6-1
changelog:
  - Update to PostgreSQL 8.3.6, for various fixes described at
    http://www.postgresql.org/docs/8.3/static/release-8-3-6.html


author: Tom Lane <tgl@redhat.com> 8.3.6-4
changelog:
  - Prevent dependent packages from needing to include sys/sdt.h
    (unintended side effect of previous patch)
  - Use -O1 on alpha, per report from Oliver Falk; -O2 tickles gcc bugs


author: Tom Lane <tgl@redhat.com> 8.3.7-1
changelog:
  - Update to PostgreSQL 8.3.7, for various fixes described at
    http://www.postgresql.org/docs/8.3/static/release-8-3-7.html
    notably the fix for CVE-2009-0922


author: Tom Lane <tgl@redhat.com> 8.4.0-1
changelog:
  - Update to PostgreSQL 8.4.0.  See release notes at
    http://www.postgresql.org/docs/8.4/static/release-8-4.html


author: Tom "spot" Callaway <tcallawa@redhat.com> 8.4.0-2
changelog:
  - update License tag to MIT (PostgreSQL calls it "BSD", but it is MIT)
  - Note: This changes nothing from a license compatibility perspective.


author: Tom Lane <tgl@redhat.com> 8.4.1-1
changelog:
  - Update to PostgreSQL 8.4.1, for various fixes described at
    http://www.postgresql.org/docs/8.4/static/release-8-4-1.html
    including two security issues
  Related: #522085
  Related: #522092


author: Tom Lane <tgl@redhat.com> 8.4.2-4
changelog:
  - Sync with Fedora devel, including:
  - Update to PostgreSQL 8.4.2, for various fixes described at
    http://www.postgresql.org/docs/8.4/static/release-8-4-2.html
    including two security issues
  Resolves: #552617
  - Remove the postgresql-python and postgresql-tcl subpackages.  These files
    are now broken out as their own packages (PyGreSQL and tcl-pgtcl,
    respectively), to reflect the now longstanding split of upstream projects.
  Related: #554431
  - Arrange for the postmaster, but not any of its child processes, to be run
    with oom_adj -17.  This compensates for the OOM killer not being smart about
    accounting for shared memory usage.
  - Remove static libraries (.a files) from package, per packaging guidelines
  - Change %define to %global, per packaging guidelines
  - Use -N not the obsolete -n in useradd call
  - Clean up specfile to eliminate rpmlint gripes, mainly by removing
    no-longer-needed provisions for superseding rh-postgresql
  - add sparc/sparc64 to multilib header support


author: Tom Lane <tgl@redhat.com> 8.4.2-5
changelog:
  - Latest version of systemtap needs the probes.o file to be built again
  Resolves: #557297
  - Provide script and instructions for building the documentation PDF


author: Tom Lane <tgl@redhat.com> 8.4.3-1
changelog:
  - Update to PostgreSQL 8.4.3, for various fixes described at
    http://www.postgresql.org/docs/8.4/static/release-8-4-3.html
  Resolves: #565558
  - Bring init script into some modicum of compliance with Fedora/LSB standards
  Resolves: #561010
  - adjust license tag to reflect OSI decision


author: Tom Lane <tgl@redhat.com> 8.4.4-1
changelog:
  - Update to PostgreSQL 8.4.4, for various fixes described at
    http://www.postgresql.org/docs/8.4/static/release-8-4-4.html
    including fixes for CVE-2010-1169 and CVE-2010-1170
  Resolves: #593033


author: Tom Lane <tgl@redhat.com> 8.4.4-2
changelog:
  - Add -p "$pidfile" to initscript's status call to improve corner cases.
    (Note: can't be fixed in Fedora until 595597 is fixed there.)
  Resolves: #561010


author: Tom Lane <tgl@redhat.com> 8.4.5-1
changelog:
  - Update to PostgreSQL 8.4.5, for various fixes described at
    http://www.postgresql.org/docs/8.4/static/release-8-4-5.html
    including the fix for CVE-2010-3433
  Resolves: #640090
  - Duplicate COPYRIGHT in -libs subpackage, per revised packaging guidelines


author: Tom Lane <tgl@redhat.com> 8.4.7-1
changelog:
  - Update to PostgreSQL 8.4.7, for various fixes described at
    http://www.postgresql.org/docs/8.4/static/release-8-4-7.html
    http://www.postgresql.org/docs/8.4/static/release-8-4-6.html
    including the fix for CVE-2010-4015
  Resolves: #672635


author: Tom Lane <tgl@redhat.com> 8.4.7-2
changelog:
  - Add fix to make plpgsql cope with dropped columns in rowtypes
  Resolves: #694249
  - Add %{?_isa} to cross-subpackage Requires, per latest packaging guidelines,
    and add explicit dependencies on the -libs subpackage to pacify rpmdiff


author: Tom Lane <tgl@redhat.com> 8.4.9-1
changelog:
  - Update to PostgreSQL 8.4.9, for various fixes described at
    http://www.postgresql.org/docs/8.4/static/release-8-4-9.html
    http://www.postgresql.org/docs/8.4/static/release-8-4-8.html
    including the fix for CVE-2011-2483
  Resolves: #740736


author: Tom Lane <tgl@redhat.com> 8.4.11-1
changelog:
  - Update to PostgreSQL 8.4.11, for various fixes described at
    http://www.postgresql.org/docs/8.4/static/release-8-4-11.html
    http://www.postgresql.org/docs/8.4/static/release-8-4-10.html
    including the fixes for CVE-2012-0866, CVE-2012-0867, CVE-2012-0868
  Resolves: #812082


author: Tom Lane <tgl@redhat.com> 8.4.12-1
changelog:
  - Update to PostgreSQL 8.4.12, for various fixes described at
    http://www.postgresql.org/docs/8.4/static/release-8-4-12.html
    including the fixes for CVE-2012-2143, CVE-2012-2655
  Resolves: #830726


author: Tom Lane <tgl@redhat.com> 8.4.13-1
changelog:
  - Update to PostgreSQL 8.4.13, for various fixes described at
    http://www.postgresql.org/docs/8.4/static/release-8-4-13.html
    including the fixes for CVE-2012-3488, CVE-2012-3489
  Resolves: #852021


author: Pavel Raiskup <praiskup@redhat.com> - 8.4.18-1
changelog:
  - Update to PostgreSQL 8.4.18, for various fixes described at
    http://www.postgresql.org/docs/8.4/static/release-8-4-14.html
    http://www.postgresql.org/docs/8.4/static/release-8-4-15.html
    http://www.postgresql.org/docs/8.4/static/release-8-4-16.html
    http://www.postgresql.org/docs/8.4/static/release-8-4-17.html
    http://www.postgresql.org/docs/8.4/static/release-8-4-18.html
    including fixes for CVE-2013-0255, CVE-2013-1900 (#1017837)


author: Pavel Raiskup <praiskup@redhat.com> - 8.4.20-1
changelog:
  - Update to PostgreSQL 8.4.20 (#1065843) for fixes described at
    http://www.postgresql.org/docs/8.4/static/release-8-4-19.html
    http://www.postgresql.org/docs/8.4/static/release-8-4-20.html


author: Pavel Raiskup <praiskup@redhat.com> - 8.4.20-7
changelog:
  - backport PGSTARTTIMEOUT variable from latest RHSCL while reasonably
    changing wait timeout to 2 seconds by default


author: Tom Lane <tgl@redhat.com> 8.1.405-1jpp
changelog:
  - Split postgresql-jdbc into its own SRPM (at last).
  - Build it from source.  Add support for gcj compilation.


author: Tom Lane <tgl@redhat.com> 8.4.701-4
changelog:
  - Add patch to provide some stub functions for JDBC 4.1 compatibility
  Resolves: #816731
  - Minor modernization of specfile, eg use maven directory macros,
    remove long-obsolete minimum versions from BuildRequires


author: Tom Lane <tgl@redhat.com> 8.4.701-5
changelog:
  - Switch to noarch (non-GCJ) build so that we can BuildRequire JDK >= 1.6;
    without this we don't get a JDBC4 driver at all, let alone 4.1.
  Related: #816731


author: Tom Lane <tgl@redhat.com> 8.4.701-8
changelog:
  - Add explicit Obsoletes to get rid of old arch-specific packages,
    per discussions in bugs 821892 and 822206
  Related: #816731


author: Tom Lane <tgl@redhat.com> 08.01.0200-1
changelog:
  - Update to version 08.01.0200.
  - Upstream now calls the library psqlodbcw.so ... add a symlink to avoid
    breaking existing odbc configuration files.


author: Tom Lane <tgl@redhat.com> 08.01.0200-2
changelog:
  - Change library name back to psqlodbc.so, because it appears that upstream
    will revert to that name in next release; no point in thrashing the name.
  - Include documentation files unaccountably omitted before (bug #184158)


author: Tom Lane <tgl@redhat.com> 08.03.0100-1
changelog:
  - Update to version 08.03.0100
  - Since it looks like upstream has decided to stick with psqlodbcw.so
    permanently, allow the library to have that name.  But continue to
    provide psqlodbc.so as a symlink.


author: Adam Jackson <ajax@redhat.com> 1.7-2
changelog:
  - Don't suggest disabling g-p-m.  Any additional power consumption is more
    than offset by the ability to suspend.


author: Jaroslav Škarvada <jskarvad@redhat.com> - 1.11-4
changelog:
  - Backported turbo detection (turbo patch, #610464)
  - Show all P-states in dump mode (dump-all-pstates patch, accepted by upstream)
  - Backported tty handling for non-interactive mode (notty patch, #628514)
  - Output error in interactive mode if there is no tty (checktty patch,
    posted upstream)
  - Fixed rpmlint warning about mixed tabs and spaces


author: Jaroslav Škarvada <jskarvad@redhat.com> - 1.11-6
changelog:
  - Improved sigwinch handling
    Resolves: rhbz#698422

    * Tue Aug 02 2011 Jaroslav Škarvada <jskarvad@redhat.com> - 1.11-5
  - Fixed sigwinch handling
    Resolves: rhbz#698422


author: Jaroslav Škarvada <jskarvad@redhat.com> - 2.3-3
changelog:
  - New version of unlimit-fds patch
  - Fixed error message if FDs limit is reached (by fd-limit-err patch)
    Related: rhbz#998021


author: Jaroslav Škarvada <jskarvad@redhat.com> - 2.3-4
changelog:
  - Reintroduced -d dump switch and improved reporting options
    (by improve-reporting-options patch)
    Resolves: rhbz#1333439


author: Roberto Bagnara <bagnara@cs.unipr.it>
changelog:
  - Changed `Summary'.
  - Changed `Packager' in view of PGP signatures.
  - Changed `Group' to `Development/Libraries'.
  - Require gcc-c++ 2.96-85 or later version.


author: Roberto Bagnara <bagnara@cs.unipr.it>
changelog:
  - The move to libtool is complete: we can now build and distribute
    (with, e.g., RPM) static and dynamic versions of the library.


author: Roberto Bagnara <bagnara@cs.unipr.it>
changelog:
  - `%files' section fixed for the yap package.
  - The `%files' sections of each package are now complete.


author: Roberto Bagnara <bagnara@cs.unipr.it>
changelog:
  - Added the `ppl_lcdd' program to the main package.
  - Require gcc-c++ to be exactly version 3.4.1.
  - We require gmp at least 4.1.3.


author: Roberto Bagnara <bagnara@cs.unipr.it>
changelog:
  - The file doc/README has been renamed README.doc so as not to conflict
    with the library's main README file.
  - Require gcc-c++ to be exactly version 3.4.1.
  - `Summary' updated to reflect the fact that the library now provides
    numerical abstractions other than convex polyhedra.


author: Roberto Bagnara <bagnara@cs.unipr.it>
changelog:
  - Added the `%changelog' section.
  - `Release' set to 2.
  - `Packager' and `Vendor' tags removed.
  - `Summary' fields are no longer ended with a dot.
  - The value of the `License' tag is now `GPL'.
  - Removed unused definition of `builddir'.
  - The `Name', `Version' and `Release' tags are now directly defined.
  - Commented out the efinitions of the `Require' and `Prefix' tags.
  - Set the `BuildRequires' tag to `gmp-devel'.
  - Exploit the features of `%setup', `%configure', `%install',
    `%post' and `%postun'.
  - Mixed use of spaces and tabs avoided.
  - Do configure with the --disable-rpath option so as to avoid
    hardcoding the path to search libraries.
  - Do not include libtool archive files.
  - Packages reorganized.


author: Roberto Bagnara <bagnara@cs.unipr.it> 0.9-2
changelog:
  - The `%_libdir/ppl' is no longer orphaned.
  - Use `make %{?_smp_mflags}' for building.
  - The `swi' package has been renamed `swiprolog-devel'.


author: Roberto Bagnara <bagnara@cs.unipr.it>
changelog:
  - Make `swiprolog-devel' depend on `pl' (at leat 5.6); documentation added.
  - The `yap' package has been renamed `yap-devel' and completed.
  - The `gprolog' package has been renamed `gprolog-devel' and completed.
  - The `ppl_lcdd' and `ppl_lpsol' programs are now in a new `utils' package.
  - The `ppl-config' program is now in the `devel' package.
  - Modified the configuration command so that the `glpk-devel' include files
    are found.


author: Roberto Bagnara <bagnara@cs.unipr.it> 0.9-5
changelog:
  - Use `%{_includedir}' and `%{_libdir}' instead of `/usr/include'
    and `/usr/lib', respectively.
  - Use `%{_datadir}/doc/%{name}' instead of `/usr/share/doc/ppl'.
  - Replaced `%defattr(-,root,root)' with `%defattr(-,root,root,-)'.


author: Roberto Bagnara <bagnara@cs.unipr.it> 0.9-6
changelog:
  - All the static archives are now in `*-static' packages.
  - Packages `ppl-gprolog-devel', `ppl-swiprolog-devel' and `ppl-yap-devel'
    renamed `ppl-gprolog', `ppl-swiprolog' and `ppl-yap',
    respectively.
  - As a workaround for a bug in the `pl' package (Bugzilla Bug 243084),
    `ppl-swiprolog' is now dependent on `readline-devel'.
  - Added `%dir %{_datadir}/doc/%{name}'.
  - The `ppl-user-0.9-html' documentation directory is now properly listed.
  - Remove installed *.la files.
  - Added a `ppl-0.9-configure.patch' to avoid overriding CFLAGS and CXXFLAGS.


author: Roberto Bagnara <bagnara@cs.unipr.it> 0.9-8
changelog:
  - Patch the `libtool' script after `%configure' so as to fix
    the rpath issue.
  - Revised the description of the `devel' package.
  - Include also the `TODO' file in the documentation of the main package.


author: Roberto Bagnara <bagnara@cs.unipr.it> 0.9-11
changelog:
  - The `gprolog' package is not available on the ppc64 architecture:
    so do `ppl-gprolog' and `ppl-gprolog-static'.


author: Roberto Bagnara <bagnara@cs.unipr.it> 0.9-12
changelog:
  - Disable YAP support until bug 246815 is fixed.
  - Bug 243084 has been fixed: `ppl-swiprolog' dependency on `readline-devel'
    removed.


author: Roberto Bagnara <bagnara@cs.unipr.it> 0.9-16
changelog:
  - The value of the `License' tag is now `GPLv2+'.
  - `ppl-swiprolog' dependency on `readline-devel' removed (again).


author: Roberto Bagnara <bagnara@cs.unipr.it> 0.9-17
changelog:
  - The SWI-Prolog `pl' package is temporarily not available on the ppc64
    architecture: temporarily disabled `ppl-swiprolog' and
    `ppl-swiprolog-static' on that architecture.


author: Roberto Bagnara <bagnara@cs.unipr.it> 0.10-1
changelog:
  - Updated and extended for PPL 0.10.  In particular, the `ppl-config'
    program, being useful also for non-development activities, has been
    brought back to the main package.


author: Karsten Hopp <karsten@redhat.comt> 0.10-7
changelog:
  - There are no GNU Prolog packages available on s390 and s390x: disable
    the GNU Prolog interface also on those platforms (besides ppc64).


author: Roberto Bagnara <bagnara@cs.unipr.it> 0.10-10
changelog:
  - There are no GNU Prolog packages available on ia64: disable the GNU Prolog
    interface also on those platforms (besides ppc64, s390 and s390x).


author: Roberto Bagnara <bagnara@cs.unipr.it> 0.10-11
changelog:
  - Moved changelogs and PostScript and PDF versions of the GPL to the
    `docs' subpackages. This saves considerable space on the live media.


author: Roberto Bagnara <bagnara@cs.unipr.it> 0.10.2-3
changelog:
  - The `gprolog' and `yap' packages are not available on the sparc64 and
    sparcv9 architectures: so do `ppl-gprolog', `ppl-gprolog-static' and
    `ppl-yap'.


author: Caolán McNamara <caolanm@redhat.com> - 0.10.2-10
changelog:
  - Resolves: rhbz#521588 stick pl include before Yap include to stop 
    configure-time misdetection to resolve FTBFS


author: Erik Troan <ewt@redhat.com>
changelog:
  - added a patch to use our own route.h, rather then glibc's (which has 
    alignment problems on Alpha's) -- I only applied this patch on the Alpha,
    though it should be safe everywhere


author: Cristian Gafton <gafton@redhat.com>
changelog:
  - updated to ppp-2.3.3, build against glibc-2.0.6 - previous patches not
    required any more.
  - added buildroot
  - fixed the PAM support, which was really, completely broken and against any
    standards (session support is still not here... :-( )
  - we build against running kernel and pray that it will work
  - added a samples patch; updated glibc patch


author: Michael K. Johnson <johnsonm@redhat.com>
changelog:
  - New version 2.3.9 required for kernel 2.3.13 and will be required
    for new initscripts.  auth patch removed; 2.3.9 does the same thing
    more readably than the previous patch.


author: Nalin Dahyabhai <nalin@redhat.com> 2.4.1-2
changelog:
  - add buildprereq on pam-devel (#49559)
  - add patch to respond to CBCP LCP requests (#15738)
  - enable cbcp support at build-time
  - change the Copyright: tag to a License: tag


author: Thomas Woerner <twoerner@redhat.com> 2.4.2-5
changelog:
  - example scripts are using change_resolv_conf to modify /etc/resolv.conf (#132482)
  - require new libpcap library (>= 0.8.3-6) with a fix for inbound/outbound filter processing
  - not using internal libpcap structures anymore, fixes inbound/outbound filter processing (#128053)


author: David Woodhouse <dwmw2@redhat.com> 2.4.2-6.2
changelog:
  - Link pppoatm plugin against libresolv.
  - Revert to linux-atm headers without the workaround for #127098


author: Thomas Woerner <twoerner@redhat.com> 2.4.3-1
changelog:
  - new version 2.4.3
  - updated patches: make, lib64, dontwriteetc, fix, fix64, no_strip, radiusplugin
  - dropped patches: bpf, signal, pcap, pppoatm, pkgcheck


author: Thomas Woerner <twoerner@redhat.com> 2.4.3-2
changelog:
  - dropped all executable bits in scripts directory to prevent rpm requiring
    programs used in there


author: Thomas Woerner <twoerner@redhat.com> 2.4.4-1
changelog:
  - new version 2.4.4 with lots of fixes
  - fixed reesolv.conf docs (#16507) Thanks to Matt Domsch for the initial patch 
  - enabled CBCP (#199278)


author: Martin Nagy <mnagy@redhat.com> 2.4.4-6
changelog:
  - call closelog earlier (#222295)
  - fix ChapMS2 (#217076)
  - moving header files to new -devel package (#203542)


author: Michal Sekletar <msekleta@redhat.com> - 2.4.5-6
changelog:
  - don't require logrotate (#922769)
  - move pppd database to /var/run/ppp to prevent SELinux AVCs (#968398)


author: Michal Sekletar <msekleta@redhat.com> - 2.4.5-7
changelog:
  - ignore unrecognised radiusclient configuration directives (#906912)
  - add missing l2tp support (#815128)


author: Michal Sekletar <msekleta@redhat.com> - 2.4.5-8
changelog:
  - prevent running into issues caused by undefined behavior (pointers of incompatible types aliasing the same object)


author: Paul Howarth <paul@city-fan.org> 1.6.0-2
changelog:
  - Weed out documentation useful only to developers
  - Add dist tag
  - Use full URL for SOURCE0
  - Fix permissions on %{_sbindir}/pptp


author: Paul Howarth <paul@city-fan.org> 1.7.0-1
changelog:
  - new upstream version 1.7.0
  - remove patch, included upstream
  - edit Makefile to prevent attempted chown in %install
  - remove redundant %attr tag in %files
  - honour $RPM_OPT_FLAGS
  - ensure directories have correct permissions


author: Paul Howarth <paul@city-fan.org> 1.7.1-1
changelog:
  - new upstream version 1.7.1 (fixes #166394)
  - include new document PROTOCOL-SECURITY
  - cosmetic change: replace variables with macros


author: Paul Howarth <paul@city-fan.org> 1.7.1-3
changelog:
  - Change download URL from df.sf.net to downloads.sf.net
  - Expand tabs in spec
  - Clarify license as GPL version 2 or later


author: Paul Howarth <paul@city-fan.org> 1.7.2-1
changelog:
  - Update to 1.7.2
  - New script and manpage: pptpsetup
  - Add patch to remove reference to stropts.h, not shipped in F9 onwards


author: Paul Howarth <paul@city-fan.org> 1.7.2-3
changelog:
  - Add dependency on /sbin/ip
  - Disable parallel make - object files are missing dependency on config.h


author: Paul Howarth <paul@city-fan.org> 1.7.2-5
changelog:
  - Retain permissions on /etc/ppp/chap-secrets when using pptpsetup (#492090)
  - Use upstream versions of patches
  - Re-enable parallel build; Makefile dependencies now fixed
  - Use perl rather than sed to edit Makefile, for spec compatibility with
    ancient distro releases


author: Paul Howarth <paul@city-fan.org> 1.7.2-6
changelog:
  - Don't check for MPPE capability in kernel and pppd unless we're creating a
    tunnel that requires encryption
  - Don't check for MPPE capability in kernel and pppd at all because current
    Fedora releases and EL >= 5 include MPPE support out of the box (#502967)


author: Jakub Jelinek <jakub@redhat.com> 0.1.1-1
changelog:
  - relocate stabs and dwarf-2 debugging formats
  - support both --all and incremental prelinking
  - handle hardlinks
  - limit to libraries in /etc/prelink.conf directories or
    directories from command line


author: Jakub Jelinek <jakub@redhat.com> 0.1.2-1
changelog:
  - bail out early if ELF object does not have sh_offsets
    monotonically increasing
  - disallow prelinking if there are conflicts against read-only
    segments in shared libraries (ie. non-pic shared libraries
    - this is better than bailing out for all non-pic shared libraries)
  - add some C++ specific optimizations to reduce number of conflicts,
    more to come


author: Jakub Jelinek <jakub@redhat.com> 0.1.3-1
changelog:
  - fix layout.c
  - create .gnu.prelink_undo section, --undo and --verify modes will use that
  - some more C++ specific optimizations


author: Jakub Jelinek <jakub@redhat.com> 0.1.3-2
changelog:
  - use the new DT_GNU_CONFLICT/DT_GNU_LIBLIST/SHT_GNU_LIBLIST constants
  - unlink *.#prelink# files if necessary


author: Jakub Jelinek <jakub@redhat.com> 0.1.3-3
changelog:
  - don't use .gnu.reloc section, use .rel.dyn or .rela.dyn instead
  - put RELATIVE relocs first, not last, so that DT_REL{,A}COUNT
    works
  - put in updated glibc patch
  - no need for special binutils patch - all is done in the -z combreloc
    patchset


author: Jakub Jelinek <jakub@redhat.com> 0.1.3-4
changelog:
  - brown paper bag time: when determining if conversion from REL to RELA
    is needed, check all non-PLT rel sections, including last.
    This caused prelinking to fail with -z combreloc compiled libraries.


author: Jakub Jelinek <jakub@redhat.com> 0.1.3-5
changelog:
  - fix sorting of .rel*.dyn sections, so that all RELATIVE relocs really
    come first
  - when DT_RELCOUNT already exists and conversion REL->RELA is done,
    convert it into DT_RELACOUNT
  - set conflict lookupent and conflictent to 0 for undefineds
  - don't bother with DT_REL*COUNT for apps, they cannot have any RELATIVE
    relocs


author: Jakub Jelinek <jakub@redhat.com> 0.1.3-7
changelog:
  - fix layout code so that -R works
  - on IA-32, when there are no R_386_PC32 relocs and no R_386_32 relocs
    with non-zero addend (= memory content), don't convert REL->RELA,
    only switch R_386_32 relocs to R_386_GLOB_DAT
  - support creating a new PT_LOAD segment if necessary, if SHT_NOBITS
    sections are small, instead of adding new PT_LOAD segment just add file
    backing to those NOBITS sections
  - added testsuite
  - new supported architectures (Alpha including .mdebug section support,
    Sparc, Sparc 64-bit, X86_64 (the last one untested)), beginning of PPC
    support


author: Jakub Jelinek <jakub@redhat.com> 0.2.0-1
changelog:
  - added --undo and --verify mode
  - new architectures s390, s390x, arm, sh
  - handle binaries/shared libraries with non-allocated sections
    without monotonically increasing sh_offsets
  - handle .sbss and .sdynbss
  - fixed a bug in 64-bit LE/BE read routines
  - removed .rel{,a}.dyn reloc conversion/sorting, it was duplicating
    ld's -z combreloc and complicated lots of things
  - fixed STB_LOCAL/STT_SECTION symbol adjusting
  - use mkstemp for temporary files, allow --verify for binaries/libs
    on read-only filesystems
  - added DWARF-2 .debug_ranges adjustement, special case GCC's
    "set base to 0 and make things absolute instead of relative" trick
  - allow arches to override default layout mechanism (for ppc)
  - added some new tests, test --undo and --verify modes in the testsuite
  - alpha: adjust what R_ALPHA_GLOB_DAT points to too
  - i386: apply _32 and _PC32 REL relocs, as apply_rel can be called
    for C++ optimizations before REL->RELA conversion
  - ppc: layout strategy to satisfy ppc lib location preferences
  - sparc64: handle R_SPARC_DISP64
  - x86-64: adjust what R_X86_64_RELATIVE points to too
  - link prelink statically, esp. because of --verify mode
  - run make check during build process


author: Jakub Jelinek <jakub@redhat.com> 0.2.0-7
changelog:
  - when growing allocated shared lib sections (for REL->RELA
    conversion), make sure !PF_W and PF_W segments don't end up
    on the same page
  - when finding space for sections in an executable, make sure
    it is not included in between two reloc sections
  - for non-zero SHN_ABS symbols on 32-bit arches mask high
    32-bits of st_value (libelf 0.8.x is strict here)


author: Jakub Jelinek <jakub@redhat.com> 0.2.0-8
changelog:
  - avoid putting garbage into executable's .gnu.liblist sh_link
    if we did not have to grow .dynstr
  - don't segfault on bogus sh_link and sh_info values (#72705)


author: Jakub Jelinek <jakub@redhat.com> 0.2.0-9
changelog:
  - enable on ppc and x86_64
  - fix ppc far PLT slot prelink
  - support --undo on ppc
  - for bug-compatibility with some unnamed OS changed R_SPARC_RELATIVE
    --undo
  - tiny steps towards TLS support on IA-32, more will come


author: Jakub Jelinek <jakub@redhat.com> 0.2.0-11
changelog:
  - make it work with elfutils instead of libelf 0.[78]
  - update to newer auto*/libtool
  - some more steps towards TLS support, at least --reloc-only should work


author: Jakub Jelinek <jakub@redhat.com> 0.2.0-13
changelog:
  - use ELF_F_PERMISSIVE if defined
  - be permissive even when doing --reloc-only
  - fix up .plt section sh_entsize on Alpha


author: Jakub Jelinek <jakub@redhat.com> 0.2.0-18
changelog:
  - fix section indices in .symtab if non-alloced sections weren't
    originally monotonically increasing
  - s390, s390x and Alpha TLS support


author: Jakub Jelinek <jakub@redhat.com> 0.2.0-20
changelog:
  - ppc TLS
  - some ppc64 work
  - avoid using trampolines for nested functions
  - fix typo in prelink man page (#89247)


author: Jakub Jelinek <jakub@redhat.com> 0.2.0-22
changelog:
  - don't adjust DT_REL{,A} if it is 0
  - allow prelinking of libraries with no dependencies
  - fix handling of libraries with no lazy relocs, no normal relocs or no
    relocs at all
  - some new tests
  - fix SH (Daniel Jacobowitz)


author: Jakub Jelinek <jakub@redhat.com> 0.2.0-23
changelog:
  - when updating dynamic tags for executable after section reshuffling,
    check section type as well, so that 0 sized sections don't get the
    tags attached instead of the proper ones
  - when an address space conflict is found between libraries for the same
    executable during layouting, check properly for all remaining conflicts
    as well


author: Jakub Jelinek <jakub@redhat.com> 0.2.0-24
changelog:
  - optimize out conflicts in G++ 3+ virtual tables if they are just
    because some method has been called from a binary and thus there
    is a .plt slot in the binary. This change not only kills lots of conflicts
    on some KDE programs, but also should speed up runtime (not just startup
    time), since the hop through .plt is bypassed
  - added new C++ test
  - fix a bug in ppc64 fixup .plt code


author: Jakub Jelinek <jakub@redhat.com> 0.2.0-25
changelog:
  - exec-shield support
  - with -R, don't randomize just base address from which all libs
    are layed out, but also slightly randomize order of libraries
    in the layout queue
  - add check-harder and check-cycle makefile goals in testsuite/,
    use it during rpm building


author: Jakub Jelinek <jakub@redhat.com> 0.2.0-26
changelog:
  - don't segfault in C++ optimizations if a conflict from undefined
    to defined value is seen
  - some more ppc64 work


author: Jakub Jelinek <jakub@redhat.com> 0.2.0-27
changelog:
  - add --quick mode
  - new test for --quick mode and also reprelinking of binary against
    upgraded shared library which needs more conflicts


author: Jakub Jelinek <jakub@redhat.com> 0.2.0-28
changelog:
  - finish and enable ppc64
  - fix ppc BR{,N}TAKEN reloc handling
  - fix up sh_offset values of zero-sized or SHT_NOBITS section
    if ld messed them up
  - issue error about bogus library dependency chains instead of
    segfaulting (plus testcases for it)


author: Jakub Jelinek <jakub@redhat.com> 0.2.1-1
changelog:
  - make sure binaries prelinked for the second and later time without
    unprelinking in between verify correctly
  - make sure DT_CHECKSUM computation is the same for newly prelinked
    and second or later time prelinked libraries
  - dwarf2 abbrev hash bugfix
  - don't allow prelinking libraries outside directories specified
    in config file or on the command line
  - several new tests for reprelinking
  - pack non-alloced sections and section header table tightly after the
    last alloced section


author: Jakub Jelinek <jakub@redhat.com> 0.2.1-2
changelog:
  - fix a thinko in the library path checking code
  - change R_386_GLOB_DAT into R_386_32 in .gnu.conflict, similarly
    R_X86_64_GLOB_DAT and R_X86_64_64
  - fix a bug in find_free_space which caused
    "section file offsets not monotonically increasing" errors on some
    IA-32 binaries
  - add --md5 and --sha options
  - use mmap during --verify if possible
  - add */lib64 directories to prelink.conf


author: Jakub Jelinek <jakub@redhat.com> 0.3.0-1
changelog:
  - run prelink from cron automatically, add /etc/sysconfig/prelink
    to configure it
  - update manual page


author: Jakub Jelinek <jakub@redhat.com> 0.3.0-2
changelog:
  - avoid assertion failures when changing PROGBITS .bss back into
    NOBITS .bss (#101813)
  - add 2 new tests for it


author: Jakub Jelinek <jakub@redhat.com> 0.3.0-3
changelog:
  - fix DT_CHECKSUM computation - do STT_LOCAL symbol frobbing and .mdebug
    updates write_dso would do also before checksum computation (#89953)


author: Jakub Jelinek <jakub@redhat.com> 0.3.0-5
changelog:
  - fix prelink segfault on -z nocombreloc libraries (#103404)
  - run one make check round with -Wl,-z,nocombreloc to test handling
    of nocombreloc binaries and libraries


author: Jakub Jelinek <jakub@redhat.com> 0.3.0-7
changelog:
  - don't rely on malloc/calloc/realloc with size 0 returning a unique pointer
  - fix testsuite, so that it works even if installed glibc/libstdc++
    is already prelinked


author: Jakub Jelinek <jakub@redhat.com> 0.3.0-8
changelog:
  - use /var/lib/misc/prelink.full instead of /var/run/prelink.full for last
    full prelink timestamp (#106721)
  - warn about UPX compressed binaries or libraries/binaries without section
    headers (neither can be prelinked obviously)


author: Jakub Jelinek <jakub@redhat.com> 0.3.0-11
changelog:
  - fix adjustement of DT_VALRNGLO .. DT_VALRNGHI and
    DT_ADDRRNGLO .. DT_ADDRRNGHI dynamic tags when relocating shared
    libraries
  - never adjust p_vaddr/p_paddr/p_offset of PT_GNU_STACK segment
  - allow shell wildcards in /etc/prelink.conf
  - fix REL->RELA conversion of shared libraries if .rel.dyn
    or .rel.plt are last sections in readonly PT_LOAD segment
  - force full reprelinking on prelink upgrades (well, first time
    the cron job is run after the upgrade)
  - require coreutils, findutils, util-linux, gawk and grep


author: Jakub Jelinek <jakub@redhat.com> 0.3.0-12
changelog:
  - added execstack tool
  - added -o option, to be used together with -u
  - free temp_filename in close_dso


author: Jakub Jelinek <jakub@redhat.com> 0.3.0-15
changelog:
  - blacklist support
  - use FTW_ACTIONRETVAL if available to avoid even stating of
    files in blacklisted directory trees
  - SELinux support


author: Jakub Jelinek <jakub@redhat.com> 0.3.0-18
changelog:
  - allow R_*_JU?MP_SLOT relocs to point also into .got.plt
    sections on IA32/AMD64/ARM/s390/s390x/SH


author: Jakub Jelinek <jakub@redhat.com> 0.3.0-19
changelog:
  - refuse to prelink objects whose dependencies as reported by
    ldd don't include all dependencies transitively (this can
    happen when using RPATH and a shared library with the same
    SONAME exists both in that RPATH and either another RPATH
    or standard library directories)
  - add testcase for this
  - rework .dynsym/.symtab STT_SECTION translation, so that it works
    with binutils which put only sections not generated by the linker
    into .dynsym for shared libraries
  - fix make check, so that it is not confused by 2.6.x kernel
    VDSOs


author: Jakub Jelinek <jakub@redhat.com> 0.3.0-20
changelog:
  - clearify message about unlisted dependencies
  - don't do SELinux context copying if is_selinux_enabled () < 0


author: Jakub Jelinek <jakub@redhat.com> 0.3.0-21
changelog:
  - fix prelink abort in certain cases where a new PT_LOAD segment
    needs to be added (seen on AMD64)


author: Jakub Jelinek <jakub@redhat.com> 0.3.1-1
changelog:
  - add prelink documentation (PDF format)
  - fix assertion failures on PPC (.sdynbss related, #115925)
  - fix prelink --help (#115202)
  - avoid free on uninitialized variable in one error path (#117332)
  - s/i386/%{ix86}/ to make mharris happy


author: Jakub Jelinek <jakub@redhat.com> 0.3.1-2
changelog:
  - unlink temporary files if renaming to the destination or setting of
    security context failed (#118251)
  - fix bi-architecture prelinking (#118226)
  - if prelink called from the cron script fails, note the exit status
    into /var/log/prelink.log


author: Jakub Jelinek <jakub@redhat.com> 0.3.2-1
changelog:
  - fix cxx.c:68: find_cxx_sym: Assertive `n < ndeps' failed problem
    on 32-bit architectures (#118522)
  - build prelink.cache into temporary file and atomically rename over
    (#121109)


author: Jakub Jelinek <jakub@redhat.com> 0.3.2-2
changelog:
  - add 2 new TLS testcases (one that fails e.g. with glibc < 2.3.3-28
    on IA-32)
  - SPARC TLS support


author: Jakub Jelinek <jakub@redhat.com> 0.3.2-6
changelog:
  - change sed separator in testsuite scripts from | to , if \|
    is present in regexps, as that invokes undefined behaviour
    which changed between GNU sed 4.0.9 and 4.1


author: Jakub Jelinek <jakub@redhat.com> 0.3.2-10
changelog:
  - support for non-absolute blacklist glob patterns (e.g. -b *.la)
  - cache information about non-prelinkable files (non-ELF, statically linked,
    too small .dynamic, DT_TEXTREL with conflicts against it; #132056)
  - other speedups for prelink -aq
  - for --verify, make sure only read-only fd's are opened for the
    unprelinked temporary file, otherwise a kernel might ETXTBUSY on it
    (#133317)
  - change warning message if some object's dependencies can't be found
  - add buildrequires libselinux-devel and use %{_tmppath} instead
    of /var/tmp in Buildroot (#132879)


author: Jakub Jelinek <jakub@redhat.com> 0.3.3-1
changelog:
  - if layout code needs to re-prelink some library, make sure
    all libraries that depend on it are re-prelinked too (#140081)
  - add several more checks before deciding it is ok to prelink a binary
    (even if another bug like #140081 was in, these checks should hopefully
    catch it and refuse to (re-)prelink the binary)
  - added new PRELINK_NONRPM_CHECK_INTERVAL variable to /etc/prelink,
    defaulting to 7 days.  Prelink nightly job will not do anything
    if that interval has not elapsed since last prelinking and
    and the rpm database has not been modified since that prelinking.
    This is useful if you rely on rpm/up2date/yum/apt-rpm for library
    and binary updates.  If you combine it with other means (installs
    from source, tarballs etc.), you probably want to
    set PRELINK_NONRPM_CHECK_INTERVAL=0.
  - update prelink man page (#126468)


author: Jakub Jelinek <jakub@redhat.com> 0.3.4-1
changelog:
  - fix prelink -uo when linked against libselinux (#146637)
    and when the -o argument filename is on a different filesystem
    than the object that needs undoing


author: Jakub Jelinek <jakub@redhat.com> 0.3.5-1
changelog:
  - support for ppc32 -msecure-plt libraries and binaries
  - don't crash if d_tag is invalid (#155605)
  - rebuilt against robustified libelf (CAN-2005-1704)
  - fix handling of libraries and binaries given on command
    line without any / characters in the filename


author: Jakub Jelinek <jakub@redhat.com> 0.3.6-1
changelog:
  - remove kernel requires - installed kernel doesn't imply running
    kernel anyway and in FC5 kernels older than 2.4.20 can't be used
    anyway, as LinuxThreads are no longer included
  - don't relocate stabs N_{B,D,}SLINE (reported by Ashley Pittman)


author: Jakub Jelinek <jakub@redhat.com> 0.3.6-3
changelog:
  - rebuilt again, disable -Wl,-z,nocopyreloc tests on x86_64,
    nocopyreloc really doesn't work on this platform (#180552)


author: Jakub Jelinek <jakub@redhat.com> 0.3.7-1
changelog:
  - in -q mode, recheck the canonicalized filename to avoid
    overwriting symlinks with regular files (#145983, #188062)
  - allow prelinking of binaries with .tbss section


author: Jakub Jelinek <jakub@redhat.com> 0.3.8-1
changelog:
  - fix -q mode canonicalization fix, speed up filename canonicalization
    by caching canonicalization for directories (#145983, #188062)
  - remove bogus e_shoff assertion check (#194016)
  - move prelink log file to /var/log/prelink/prelink.log (#194473)
  - increase x86-64 maxpagesize to 2MB


author: Jakub Jelinek <jakub@redhat.com> 0.3.9-1
changelog:
  - DT_GNU_HASH support
  - handle N_BNSYM and N_ENSYM stabs (#198203)
  - handle upgrades from prelink with smaller maxpagesize to prelink
    with larger maxpagesize (#196941)


author: Jakub Jelinek <jakub@redhat.com> 0.3.9-4
changelog:
  - fix adjusting of .debug_ranges if end of range is at the end of some
    section and there is padding before the following one


author: Jakub Jelinek <jakub@redhat.com> 0.3.10-1
changelog:
  - MIPS support (Richard Sandiford)
  - don't leave temporary files behind on prelink --verify failures (#199251)


author: Jakub Jelinek <jakub@redhat.com> 0.4.0-1
changelog:
  - add support for -c /etc/prelink.conf.d/*.conf in prelink.conf (#244452)
  - remove no longer existent directories from default prelink.conf (#248694)
  - reenabled prelink C++ optimizations which have not triggered any longer
    since _ZT[IV]* moved into .data.rel.ro section from .data
  - fixed performance issues in C++ optimizations, especially on GCJ
    CNI programs (#314051)
  - other performance improvements, prelink -avmR after prelink -ua now
    takes roughly 3m4s real time instead of 20m27s before
  - don't run TEXTREL tests if SELinux is enforcing (#245928)


author: Jakub Jelinek <jakub@redhat.com> 0.4.1-1
changelog:
  - add support for STT_GNU_IFUNC on i?86/x86_64 and R_{386,X86_64}_IRELATIVE
  - add support for DWARF3/DWARF4 features generated newly by recent
    gccs
  - temporarily link prelink against -lpthread to workaround -lselinux
    issue


author: Jakub Jelinek <jakub@redhat.com> 0.4.2-7
changelog:
  - BuildReq libselinux-utils (#571724)
  - handle R_390_{PC32DBL,16,PC16,PC16DBL,8} relocations in 31-bit objects
    (#552635)
  - add prelink.conf(5) man page as a link to prelink(8) (#528933)


author: Jakub Jelinek <jakub@redhat.com> 0.4.3-1
changelog:
  - add support for prelink -u -o - library
  - add DWARF4 support
  - fix up reloc{8,9}.sh for sparc64, reenable testing on sparc64


author: Jakub Jelinek <jakub@redhat.com> 0.4.3-4
changelog:
  - for prelink -u -o ... if no .gnu.prelink_undo section is
    present just pass through the original bits to the output file
    instead of saving the ELF file using libelf into a temporary
    and then copying over or renaming that to the final output file
    (#614382)


author: Jakub Jelinek <jakub@redhat.com> 0.4.4-1
changelog:
  - support copying over extended attributes (#456105)
  - handle DW_OP_GNU_implicit_pointer, fix handling of DW_OP_call_ref


author: Jakub Jelinek <jakub@redhat.com> 0.4.6-1
changelog:
  - enable for arm (#733089)
    - adjust arm default dynamic linker
    - fix up fast PIE detection to handle PT_LOPROC ... PT_HIPROC phdrs
      before PT_PHDR
    - disable cxx{1,2}.sh test checking for conflict removal on arm
      due to EABI weirdnesses, add new cxx3.sh test that tests conflict
      removal even on arm


author: Jakub Jelinek <jakub@redhat.com> 0.4.6-3
changelog:
  - add --layout-page-size=N option, default to --layout-page-size=32768
    on AMD Bulldozer (#739460)
  - handle 0%{?rhel} >= 7 like 0%{?fedora} >= 13


author: Jakub Jelinek <jakub@redhat.com> 0.4.6-3.1
changelog:
  - fix saving of cache if some dependencies are unprelinkable and their                                            
    dependencies bad (#788238)                                                                                      
  - fix up DWARF4 DW_AT_data_member_location handling                                                               
  - add .debug_macro support                                                                                        
  - add DWZ multifile support


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - Change to "License: GPL or artistic" from "Copyright: distributable"
  - Fix man page (#35825)
  - 3.15.1
  - redo config patch


author: Trond Eivind Glomsrød <teg@redhat.com> 3.22-4
changelog:
  - Add Telsa Gwynne's procmailrc as a doc file - it's
    excellently commented, and is a great example


author: Peter Vrabec <pvrabec@redhat.com> 3.22-17
changelog:
  - fix truncation of mailbox when running into a disk quota or a
    full partition. Patch from Solar Designer.


author: Miroslav Lichvar <mlichvar@redhat.com> 3.22-18
changelog:
  - add IPv6 support to comsat notification (#198403)
  - package man page for mailstat
  - change mail spool directory to /var/spool/mail


author: Miroslav Lichvar <mlichvar@redhat.com> 3.22-24
changelog:
  - rename getline to avoid conflict with glibc (#505977)
  - add -Wno-comments to CFLAGS
  - remove package name from summary


author: Jakub Jelinek <jakub@redhat.com>
changelog:
  - don't try to load System.map (and spit error messages if it does not
    exist) if ps or top are not going to use it, both to speed things up
    and remove the ugly messages when they don't make sense.
  - in top, print the possible error messages using standard top SHOWMESSAGE
    (because it will be now printed out when already in terminal mode).


author: Michael K. Johnson <johnsonm@redhat.com>
changelog:
  - procps-2.0.7
  - integrated all patches except for signames patch, which is broken
    and unnecessary
  - See NEWS for changes between 2.0.6 and 2.0.7
  - Added patch to correctly install desktop file.  Oops.


author: Alexander Larsson <alexl@redhat.com> 2.0.7-23
changelog:
  - Fix unsigned/signed bug. Closes #60998.
  - Update threadbadhack to correctly propagate process time to the main thread.


author: Alexander Larsson <alexl@redhat.com> 2.0.7-24
changelog:
  - Fix saving of sort, fixes #32757
  - Fix printing size, fixes #48224
  - Fix float decimal point input #58163


author: Colin Walters <walters@redhat.com> 3.2.1-4
changelog:
  - Add little patch to make w/who work when getattr access
    to /proc/<pid> for the user's login process is denied


author: Alan Cox <alan@redhat.com> 3.2.1-6
changelog:
  - Removed broken SELinux patch to w
  - Added a better alternative whereby we get less data but don't fall for
    vanished processes when SELinux is running


author: Karel Zak <kzak@redhat.com> 3.2.3-6
changelog:
  - update FAQ
  - update spec description
  - fix text in .noproc patch
  - fix segv fault if cpu number exceeding 38 (#137159)


author: Karel Zak <kzak@redhat.com> 3.2.5-1
changelog:
  - update to new upstream 3.2.5
  - recreate selinux patch
  - remove errno, slabinfo21 and fullpath patches -- all fixed by upstream


author: Karel Zak <kzak@redhat.com> 3.2.5-4
changelog:
  - fix #144459 - sysctl reports error: unknown error <...> reading key '<key>'
    (now sysctl doesn't read data from write-only /proc/sys files)


author: Karel Zak <kzak@redhat.com> 3.2.5-7
changelog:
  - improve procps-3.2.5-sysctl-writeonly.patch
  - fix #161449 - "top" ignores user and system toprc
  - fix #161559 - top segfaults when resizing console
  - fix #160796 - vmstat crashes when accessing LVM partition
  - fix #161303 - 'top' failed when remove cpus


author: Karel Zak <kzak@redhat.com> 3.2.6-4
changelog:
  - fix #191493 - watch -n doesn't handle large integers properly
  - fix #186017 - top "Cpu0" line never updates on single processor machine
                  (bugfix added to the 'remcpu' patch)
  - fix #168444 - memory usage conflicts with /proc/meminfo
  - fix #174619 - top reports wrong values for CPU(s) in batch mode
  - fix #185299 - cpu steal time support


author: Karel Zak <kzak@redhat.com> 3.2.7-8
changelog:
  - remove zombie patch (needs more investigation)
  - fix #208100 - top command with '-c' option become not to display list of tasks
  - fix #199174 - top returns with exit code 1 even if no error occurs


author: Karel Zak <kzak@redhat.com> 3.2.7-10
changelog:
  - fix #212637 - sysctl using deprecated syscall
  - fix #140975 - top corrupts screen when sorting on first column


author: Karel Zak <kzak@redhat.com> 3.2.7-11
changelog:
  - fix #234546 - 'w' doesn't give correct information about what's being run.
  - fix #228870 - process `sysctl' is using deprecated sysctl
  - cleanup spec file


author: Tomas Smetana <tsmetana@redhat.com> 3.2.7-12
changelog:
  - fix #183029 - watch ignores multibyte characters
  - fix #222251 - STIME column can jitter
  - fix array overflow in sysctl


author: Tomas Smetana <tsmetana@redhat.com> 3.2.7-17
changelog:
  - fix #185994 - top "Cpu0" line never updates when using
    "Single Cpu = Off" option on single processor machine


author: Tomas Smetana <tsmetana@redhat.com> 3.2.7-18
changelog:
  - fix displaying the CPU column as integer (related #354001)
  - don't install slabtop -- there's no /proc/slabinfo


author: Tomas Smetana <tsmetana@redhat.com> 3.2.7-21
changelog:
  - rebase patches
  - clear screen in top when switching windows
  - fix #435453 - errors with man -t formatting of ps man page


author: Daniel Novotny <dnovotny@redhat.com> 3.2.7-22
changelog:
  - fix #472783 vmstat -p <partition name> not working
  - extended diskstat parameters to unsigned long to avoid overflow


author: Daniel Novotny <dnovotny@redhat.com> 3.2.7-24
changelog:
  - slabtop -o should display the info once and then exit (RHEL bug #475963)
  - added timestamp to vmstat with new option -t (#476134)


author: Daniel Novotny <dnovotny@redhat.com> 3.2.8-4
changelog:
  - fix #554674 -  vmstat command with -n and -m does not display header even once
  - fix #554721 -  procps states a bug is hit when receiving a signal
  - fix #479703 -  [RFE] Additional option for 'top'


author: Daniel Novotny <dnovotny@redhat.com> 3.2.8-5
changelog:
  - fix #564371 -  Enhance top to display in MB vs KB
  - fix #565971 -  double free or corruption in ps


author: Daniel Novotny <dnovotny@redhat.com> 3.2.8-9
changelog:
  - fix #581547 - add vmstat -w option for wider output
  - fix #583629 - pmap does not display RSS values for a pid
  - fix #583625 - document that usernames exceeding column width are substituted with user ID


author: Jan Görig <jgorig@redhat.com> 3.2.8-15
changelog:
  - fix #622389 - The sysctl command's man page doesn't describe the option -A correctly
  - minor changelog fix


author: Jan Görig <jgorig@redhat.com> 3.2.8-17
changelog:
  - fixed bugs in procps-3.2.7-ps-cgroup.patch and procps-3.2.8-pmap-smaps.patch
  - fixed memory leaks in vmstat
  - Resolves: rhbz#684031


author: Jan Görig <jgorig@redhat.com> 3.2.8-18
changelog:
  - fix #692397 - wrong formatting of ps man page
  - fix #709684 - procps/top SWAP statistics makes no sense
    patch by KOSAKI Motohiro
  - fix #690078 - replace dlopen with build time linking
    - dropped procps-3.2.7-libselinux.patch and procps-3.2.7-ps-libselinux.patch
  - fix #690078 - nullifying variables in procps-3.2.8-pmap-smaps.patch


author: Jaromir Capik <jcapik@redhat.com> 3.2.8-20
changelog:
  - fix #701710 - vmstat does not print out correct free page count on 8TB SGI system
  - Resolves: rhbz#701710


author: Jaromir Capik <jcapik@redhat.com> 3.2.8-21
changelog:
  - fix #736023 - Common realloc mistake: 'screen' nulled but not freed upon failure
  - Resolves: rhbz#736023


author: Jaromir Capik <jcapik@redhat.com> 3.2.8-22
changelog:
  - fix #751475 - top displays incorrect CPU summary the first time with CPULOOP=1
  -   Patch15: procps-3.2.7-top-env-cpuloop.patch altered
  - fix #746997 - top utility can't sort by memory usage in batch mode
  - fix #766792 - No devel headers for procps
  - Resolves: rhbz#751475 rhbz#746997 rhbz#766792


author: Jaromir Capik <jcapik@redhat.com> 3.2.8-23
changelog:
  - fix for #757734 - top: Sorting by memory usage is not documented
  - additionally introduces other missing switches in the top man-page
  - Resolves: rhbz#746997


author: Jaromir Capik <jcapik@redhat.com> 3.2.8-24
changelog:
  - fix for #851664 - vmstat -S M 1' and 'vmstat -S m 1' erronously
  - ... output constant 'si' and 'so' value of 0
  - Resolves: rhbz#851664


author: Jaromir Capik <jcapik@redhat.com> - 3.2.8-26
changelog:
  - #1089817 - Return value of pgrep is incorrect
  - #950748 - /lib64/libproc.so package both in procps and procps-devel
  - #1011216 - Backport man page fix of top utility - RES = CODE + DATA
  - #1082877 - top/man: RES - physical memory a task 'has used'->'is using'
  - #1034337 - Include man pages for openproc(), readproc() and readproctab()
  - Resolves: rhbz#1089817 rhbz#950748 rhbz#1011216 rhbz#1082877 rhbz#1034337


author: Jaromir Capik <jcapik@redhat.com> - 3.2.8-27
changelog:
  - #1060681 - ps -p cycles over all PIDs instead of just one
  - #963799 - Should shared memory be accounted in cached in free output?
  - Resolves: rhbz#1060681 rhbz#963799


author: Jaromir Capik <jcapik@redhat.com> - 3.2.8-28
changelog:
  - #1105125 - Locale dependent float delay in top and watch utilities
  - #1039013 - Include an API in RHEL to return the number of opened file descriptors for a process
  - Resolves: rhbz#1105125
  - Related: rhbz#1034337


author: Jaromir Capik <jcapik@redhat.com> - 3.2.8-31
changelog:
  - #993072 - Make the "free" command a little more human friendly
  - #1172059 - ps coredump in stat2proc()
  - #1120580 - [RFE] Have sysctl -p read info from /etc/sysctl.d
  - #1123311 - RFE: "w" should have "-n" flag to suppress reverse name resolution of IP addresses
  - #1163404 - [procps] find_elf_note invalid read if setenv has been called before libproc init
  - Resolves: rhbz#993072 rhbz#1172059 rhbz#1120580 rhbz#1123311 rhbz#1163404


author: Jaromir Capik <jcapik@redhat.com> - 3.2.8-36
changelog:
  - #1201024 - [RFE] Increase sysctl -p line size limit
  - #1246573 - typo in ps man page
  - #1251101 - Fixing human readable patch (removing trailing spaces)
  - #1284076 - [RFE] Support for thread cgroups
  - #1288208 - use of /proc/self/auxv breaks ps when running as a different euid
  - #1288497 - pmap - no sums computed for RSS and Dirty column
  - Resolves: #1201024 #1246573 #1251101 #1284076 #1288208 #1288497


author: Jan Rybar <jrybar@redhat.com> - 3.2.8-43
changelog:
  - Rework of patch 91 from 3.2.8-37, stripping removed permanently, no new option
  - Resolves: rhbz#1322111


author: Mike A. Harris <mharris@redhat.com> 6.3.2-7
changelog:
  - Change spec tag Copyright -> License
  - change logrotate to rotate daily, and keep 1 month (31 days) of data


author: Mike A. Harris <mharris@redhat.com> 6.3.2-9
changelog:
  - Fixed bug (#53307) psacct is enabled by default, and the log files
    are huge, and will fill the disk up very quickly.  logrotate will
    now compress them daily.


author: Mike A. Harris <mharris@redhat.com> 6.3.2-11
changelog:
  - Conditionalized acct-6.3.2-config.patch to only be applied for RHL 7.x
    builds, as it breaks FHS compliance by putting files in nonstandard
    locations.  Also fixed up other places in specfile for FHS 2.2.
  - Added acct-6.3.2-I-HATE-GNU-AUTOCONK.patch because I hate GNU autoconk
    really really badly.
    
  - Bumped to -11 to avoid buildsystem stupidness


author: Mike A. Harris <mharris@redhat.com> 6.3.2-13
changelog:
  - Removed Build_7x flag, added FHS_compliant flag, reworked specfile to use new
    flag, and fixed bug (#60716)


author: Mike A. Harris <mharris@redhat.com> 6.3.2-15
changelog:
  - Added new feature - psacct initscript now controls process accounting so
    that it is not just forced on if installed as was the previous behaviour
  - Modified the initscripts package to not force psacct on anymore and made
    the new psacct-6.3.2-15 conflict with previous initscripts packages.
  - Fixed logrotate config to set perms/owner of new log files, and closed
    bug (#54165)


author: Mike A. Harris <mharris@redhat.com> 6.3.2-17
changelog:
  - Removed the files usracct and savacct, which are not used by psacct
    utilities at all, but by the sa program.  Our sa uses files in a different
    location, and so these files are unused and unnecessary.


author: Mike A. Harris <mharris@redhat.com> 6.3.2-19
changelog:
  - Made initscript touch/chmod accounting file if it is not present during
    startup, to ensure accounting works properly when enabled.


author: Elliot Lee <sopwith@redhat.com>
changelog:
  - Take the time to make sure things get through on all archs, by simply
    running it through the build system.


author: Mike A. Harris <mharris@redhat.com> 6.3.2-23
changelog:
  - Fixed chkconfig issue in rpm scripts (#61191)
  - Excludearch ia64, not taking the time to debug/troubleshoot random
    buildsystem failure due to higher priorities.


author: Mike A. Harris <mharris@redhat.com> 6.3.2-24
changelog:
  - Fixed initscript reload/restart by creating start/stop functions and
    making everything use them (#72261)


author: Mike A. Harris <mharris@redhat.com> 6.3.2-25
changelog:
  - Added with_last conditional to disable /usr/bin/last because ours is in
    the SysVInit package.  This fixes unpackaged files terminate build prob.


author: Charles Bennett <ccb@redhat.com> 6.3.2-33.fc4
changelog:
  - rhbz 133077: logrotate fixed to continue accounting during rotate
  - rhbz 141802: lastcomm was not handling all forms of --strict-match
  - rhbz 141971: rpm -e no longer leaves /var/lock/subsys/psacct
  - rhbz 43294: sa will never report any io because the kernel doesn't
     provide it.  Tweaked to ignore ac_io in acct.h
  - integrate lastcomm hz patch from RH support


author: Ivana Varekova <varekova@redhat.com> - 6.3.2-56
changelog:
  - fix the psacct to deal with all acct types and
    if it is possible and wanted then add the possibility
    to display the pid and ppid number


author: Jaromir Capik <jcapik@redhat.com> - 6.3.2-66
changelog:
  - Resolves: rhbz#837621
  - Fixing 'sa -u' SIGSEGVs & wrong UIDs
  - Fixing the ChengeLog version typos ... 6.2.3 -> 6.3.2


author: Bernhard Rosenkraenzer <bero@redhat.com> 20.1-2
changelog:
  - Add BuildRequires (#49562)
  - s/Copyright/License/
  - Fix license (it's actually dual-licensed BSD/GPL, not just "distributable")


author: Bernhard Rosenkraenzer <bero@redhat.com> 20.2-1
changelog:
  - 20.2
  - Add patch from bug report #56186; the problem is not reproducable,
    but the patch can't hurt.


author: Bernhard Rosenkraenzer <bero@redhat.com> 20.2-4
changelog:
  - Autogenerate the signal list from _includedir/bits/signum.h
    to make sure it works on all arches and doesn't break again.


author: Mike A. Harris <mharris@redhat.com> 21.2-2
changelog:
  - Updated to new upstream version 21.2
  - Updated Source: URL to sourceforge's current ftp area
  - Fixes fuser largefile bug (#66340)
  - Disable prep time sh %{SOURCE1} >src/signames.h as the 21.2 release
    fixes this already now.


author: Mike A. Harris <mharris@redhat.com> 21.3-1
changelog:
  - Updated to new upstream version 21.3
  - Removed dead script gensig.sh
  - Disabled psmisc-21.2-gcc33.patch as it is included in 21.3


author: Mike A. Harris <mharris@redhat.com> 21.4-1
changelog:
  - Updated to new upstream version 21.4
  - Ported SELinux patch forward as psmisc-21.4-redhat-selinux-psmisc.patch,
    but disabled SELINUX support temporarily until other build problems are
    resolved
  - Remove MKINSTALLDIRS-./mkinstalldirs from "make install" as that causes the
    build to fail when "./" changes.  If this option is ever added back, make
    it relative to $RPM_BUILD_DIR instead of ./ so that things do not break
  - Added pstree.x11 to file list after rpm reported it present in buildroot but
    not packaged


author: Karel Zak <kzak@redhat.com> 21.5-1
changelog:
  - Updated to new upstream version 21.5
  - Ported SELinux patch forward as psmisc-21.5-selinux.patch
  - Added psmisc-21.5-term.patch that fix termcap.h and term.h conflicts


author: Karel Zak <kzak@redhat.com> 21.6-1
changelog:
  - sync with upstream release 21.6
  - cleanup selinux patch
  - fix #165167 - buffer overflow detected in fuser


author: Karel Zak <kzak@redhat.com> 22.1.03072006cvs-1
changelog:
  - update to new upstream CVS version 
  - enable new fuser version
  - fix fuser return code 
  - fix #183897 - "pstree -a" call results in segmentation fault


author: Tomas Smetana <tsmetana@redhat.com> 22.6-5
changelog:
  - fix configure.ac to include all the required headers for peekfd
  - remove kernel-headers again -- not needed in rawhide


author: Jaromir Capik <jcapik@redhat.com> 22.6-18
changelog:
  - Dropping the previously applied fuser patch (#787776)
  - The patch has a negative performance and reliability impact
  - Related: rhbz#787776


author: Jan Rybar <jrybar@redhat.com> - 22.6-20
changelog:
  - fuser manpage: note about handling not-owned processes moved from BUGS to RESTRICTIONS
  - Resolves: rhbz#1211743


author: Tomasz Kłoczko <kloczek@rudy.mif.pg.gda.pl>
changelog:
  - new version:
      Patchlevel 17 had some minor bugfixes and improvements
      - Trailer information now put before %EOF comments if no %Trailer
      - psselect can now add blank pages.
      - Piped input works in Linux
      - spec file rewrited for using Buildroot,
      - man pages gziped.


author: Timo Karjalainen <timok@iki.fi>
changelog:
  - Reverted back to un-gzipped man-pages (Redhat style)
  - Added patch to compile everything cleanly
  - Some minor changes to specfile


author: Tim Powers <timp@redhat.com>
changelog:
  - man pages in /usr/share/man (FHS compliant location)
  - grabbed spec from contrib
  - initial build for Powertools


author: Michael Schwendt <mschwendt@fedoraproject.org> - 0:2.0.3-1
changelog:
  - Update to 2.0.3, minor and common spec adjustments + LGPL, %check,
    use URLs for official GNU companion sites.


author: Michael Schwendt <mschwendt@fedoraproject.org> - 2.0.6-2
changelog:
  - Insert -g into CFLAGS after configure script removes it.
  - Disable configure check for obsolete sigstack(), which segfaults.


author: Michael Schwendt <mschwendt@fedoraproject.org> - 2.0.7-5
changelog:
  - Patch pth-config.
    This shall fix the multiarch conflict in pth-devel (#342961).
    It must not return -I/usr/include and -L/usr/{lib,lib64} either,
    since these are default search paths already.
  - Replace the config.status CFLAGS sed expr with a patch.


author: Benjamin Otte <otte@redhat.com> - 2.6.5-2
changelog:
  - Remove make scripts, they are unneeded (use pkg-config) and break multilib
  - Add fix for strict aliasing problems
  - Fix multilib issues in generated headers
  Resolves: #rhbz605100


author: Jeff Fearn <jfearn@redhat.com> 0.1.13
changelog:
  - add appendix and appendix info to xmlClean
  - convert all configuration files from fop 0.20.5 to 0.93.0 format.
  - remove copying of common configuration directory


author: Jeff Fearn <jfearn@redhat.com> 0.1.15
changelog:
  - add 'a' to start of ID's that begin with numbers.
  - stop DTD entity strings being written in clean_id mode
  - fix pdf formatting issues
  - Merge Common_Config
  - add missing Requirements
  - add DejaVuLGCSans for Russian books


author: Jeff Fearn <jfearn@redhat.com> 0.1.18
changelog:
  - Fix missing Entity file
  - Remove graphic from boilerplate
  - Fix fop metric path to meet new package path
  - PDF Appendix, URL and title fixes


author: Jeff Fearn <jfearn@redhat.com> 0.1.19
changelog:
  - Change SYSTEM to PRODUCT as it more clearly defines what it's used for.
  - Add content to README
  - Fix 'make help' output for Books


author: Jeff Fearn <jfearn@redhat.com> 0.2
changelog:
  - Fix SYSTEM not being copied to PRODUCT properly
  - Fix GUI Strings reports
  - Fix GUI Strings css path
  - Fix Set targets as per timp@redhat.com fix.


author: Jeff Fearn <jfearn@redhat.com> 0.5
changelog:
  - Revert to kdesdk (xml2pot) to fix RHEL4 bug where entities would be dropped from pot file.
  - Switching to gnome-docs-util creates ~1500 hours of translation work in the
  - Deployment Guide alone making the switch impossible at this time :(
  - This means inline xml comments will break translation due to a bug in the sdk.
  - Added the 4 scripts from doc-tools to bin/* to avoid adding deps.
  - Added missing PRODUCT en-US & pot dirs


author: Jeff Fearn <jfearn@redhat.com> 0.7
changelog:
  - format temporary fo file as the lines where to long and confused FOP ... grrr
  - fixed po files not having links updated when clean_ids is run


author: Jeff Fearn <jfearn@redhat.com> 0.8
changelog:
  - fix non RHEL books not having the PRODUCT name attached to the
  -  rpm and specfile to avoid duplicate name problems.
  -  e.g. everyone has a Deployment_Guide so non RHEL books must be Fortitude-Deployment_Guide etc.


author: Jeff Fearn <jfearn@redhat.com> 0.9
changelog:
  - Fix "Use of uninitialized value in string eq at xmlClean line 272."
  - Add facility to prune xml tree based on condition attribute.
  - Made COMMON_CONTENT static


author: Jeff Fearn <jfearn@redhat.com> 0.10
changelog:
  - fix image dimensions on content/common/en-US/images/redhat-logo.svg
  - remove leading space from rpm spec desription
  - Made abstract wrap at 72 characters and be left aligned.
  -   it's used for the spec description
  - Move legal notice link param from xhtml.xsl to main-html so nochunks
  -   target will have legal notice embedded in page


author: Jeff Fearn <jfearn@redhat.com> 0.11
changelog:
  - add DocBook 4.5 DTD to package
  - add DocBook 1.72.0 xsl to package
  - modify makefiles to use new DocBook catalogs
  - xmlClean:
  -         Changed DTD from 4.3 to 4.5
  -         Added bookname to node id's to help avoid id clashes in sets
  -         Fixed line wrap issue in PDF generation for zh-CN and zh-TW
  -         Enforced validation of xml on all build targets
  -         Add legalnotice tag 
  -         Add address tag 
  -         Add street tag 
  -         Add city tag 
  -         Add state tag 
  -         Add postcode tag 
  -         Add country tag 
  -         Add phone tag 
  -         Add fax tag 
  -         Add pob tag 
  -         Add preface tag 
  -         Add bibliograpy related tags 
  -         Add qandaset related tags 
  - Removed Confidential image and restyle confidential html text
  - Added po2xlf script
  - Added xlf2po script
  - Added perl-XML-SimpleObject to Requires, used in xliff code
  - Fixed Makefile.GUI updating po file for source lang
  - Updated custom xml to match 1.72 docbook xsl
  - Removed MuktiNarrow fonts - using lohit-bn
  - Removed ZYSong18030 & ARPLSungtiLGB fonts - unused
  - Modified Publish output line in logfile to be a URL
  - Fixed creation of translated srpm
  - Added Liberation fonts for PDF
  - Removed DejaVuLGCSans fonts
  - Turned on Line Wrap for monospace verbatim elements
  - Moved entity SELinux from Translatable to Entities.ent, updated po files
  - Added Legal_Notice to common
  - Moved balance of non-translatable entities out of Translatable-entities.ent, updated po files
  - Added missing Req perl-SGML-Translate, used for translation reports
  - Updated documentation descriptions of Book_Info.xml tags. BZ #456489 BZ #456488


author: Jeff Fearn <jfearn@redhat.com> 0.15
changelog:
  - remove id from list-labels in questions & answers (duplicate id bug) 
  - Fixed bogus publish path for Reports


author: Jeff Fearn <jfearn@redhat.com> 0.16
changelog:
  - Added img.src.path to admon.graphics.path
  - Moved header.navigation and footer.navigation from xhtml-common to main-html
  - Removed 'redhat' from name
  - Remove NOCHUNK param, Added html-single targets
  - Added eclipse support
  - removed xmlto Requires
  - added Legal_Notice.xml for future books. Boilerplate.xml remains for back compatibility.
  - Fix rpm link creation
  - Added creation of format specific rpms
  - Added rmImages script to remove unused images from build directory
  - Removed per Product content directories
  - default version to 0


author: Jeff Fearn <jfearn@redhat.com> 0.17
changelog:
  - Remove unused PUB_DIR make variable
  - Remove 'redhat-' from FOP common paths
  - Improve help text.
  - Add error message for trying to build language without po files
  - Added error message for trying to report on a language with no PO files
  - Added error message for trying to build reports without POT files


author: Jeff Fearn <jfearn@redhat.com> 0.18
changelog:
  - Use ghelp to enable localised menus (BZ #249829)
  - Fix broken if in subpackage.xsl
  - Fix Icon missing from menu


author: Jeff Fearn <jfearn@redhat.com> 0.19
changelog:
  - Add missing targets to help output
  - Add missing variables to help_params output
  - Improve help and help_params text
  - Changed entity RHCRTSVER to 8.0 from 7.3
  - Add DejaVuLGCSans back as Liberation is broken and Russian requires DejaVuLGCSans
  - Modify Makefile to pull PO files from translation CVS
  - Ensure Legal_Notice.po[t] is never used
  - Add a warning message for GUI_String update-pot
  - Fix Bug in GUI String publish targets
  - Converted reports from hard coded HTML to Templates
  - Publish GUI_String translation reports to same location as documentation reports.


author: Jeff Fearn <jfearn@redhat.com> 0.20
changelog:
  - Added IGNORED_TRANSLATIONS to allow users to replace the chosen languages with
  -  the default langauge text when building
  - fix bug where build would fail if $(XML_LANG)/images did not exist
  - Fix bug with rpm downgrade
  - fixed CSS bug for preformatted text when rendered inside inside an example.


author: Jeff Fearn <jfearn@redhat.com> 0.21
changelog:
  - Modified screen and programlisting to force closing tag to be on it's own.
  - Added cmdsynopsis, arg, articleinfo, article, informaltable, group to xmlClean.
  - Added CHUNK_FIRST to allow per book control of first section chunking.
  -  Defaults to 1, first sections will be on their own page.
  - Fix warning message on po files with no entries
  - added role as class to orderedlist, itemizedlist, ulink, article
  - Fixed po files in sub directories not being merged correctly
  - Add website specific css


author: Jeff Fearn <jfearn@redhat.com> 0.23
changelog:
  - Add postuff to validate po files
  - Add test-po-<LANG> targets to use po-validateXML from postuff
  - Fixed error msgs in poxmerge
  - Fix bug with directory creation for deeply nested po files
  - Fixed bug where Common files could not access <bookname>.ent file BZ #322721
  - Add entity for root using <systemitem class='username'>
  - Added create_book command and files to allow local creation of new books
  - Added SHOW_REMARKS make param to control display of remark tags
  - Added OASIS dtd in xml for Kate users
  - Sort image list for bin/rmImages to aid readability
  - Modified padding and margins between figures and their titles
  - Added DejaVuLGCSansMono font metrics
  - Added DejaVuLGCSans Oblique metrics
  - Added missing dejavu-lgc-fonts dep
  - Added build message when copying Product Specific common files
  - Move local entity to first position so it overrides common entity files
  - Added missing DocBook tags to xmlClean:
  -         accel blockquote classname code colophon envar example footnote
  -         guisubmenu interface keycap keycombo literal literallayout option
  -         parameter prompt property see seealso substeps systemitem wordasword
  -         glossary glossdiv glosssee glossseealso
  - Moved executables in to bin directory.
  - Fixed layout of formal para titles in PDF
  - Removed trunctaion and elipses from title used for page headers


author: Jeff Fearn <jfearn@redhat.com> 0.25
changelog:
  - Add html.longdesc.embed xsl param to allow long descriptions of images to be embedded in html output
  - Remove Boilerplate files as ther are dupes of Legal_Notice
  - Added BRAND Makefile param to allow branding books.
  - renamed redhat.xsl to defaults.xsl
  - Fixed product not being updated in Makefile when using create_book BZ #391491
  - Removed embedded font from English PDFs as it Breaks searching
  - Added user documentation
  - create_book: fixed version and revision not working
  - Added dist target to create tar & spec files for desktop rpms
  - Made desktop rpms use html-single BZ #351731
  - Removed gnome-doc-utils dep
  - Removed docbook-style-xsl dep
  - Removed perl-SGML-Translate dep
  - Removed unused Config::Simple module
  - Switch from Template to HTML::Template as it's already in Fedora
  - Switched xlf2pot from XML::SimpleObject to XML::TreeBuilder
  - Added error messages for invalid VERSION or RELEASE
  - Changed Default PRODUCT to Documentation
  - Added warning for default PRODUCT
  - Differentiated brands
  - rename rhlogo.png title_logo.png
  - removed unused images
  - cleaned build process


author: Jeff Fearn <jfearn@redhat.com> 0.26
changelog:
  - Added CHUNK_SECTION_DEPTH param to allow chunk.section.depth override. BZ #427172
  - Fixed EXTRA_DIRS to ignore .svn dirs, Added svn_add_po target. BZ #427178
  - Fixed "uninitialized value" error when product not set. BZ #426038
  - Fixed Brand not updating. BZ #426043
  - Replaced FORMAL-RHI with HOLDER in Book_Template. BZ #426041
  - Remove reference to non-existant svg file. BZ #426063
  - Override formal.title.properties for PDF. BZ #425894
  - Override formal.object.heading for HTML. Fix H5 & H6 css. BZ #425894
  - Prepended first 4 characters of tag to IDs to aid Translation. BZ #427312


author: Jeff Fearn <jfearn@redhat.com> 0.26-4
changelog:
  - Tidy up %files, %build, %prep and remove comments from spec file.
  - Added --atime-preserve to tar command


author: Jeff Fearn <jfearn@redhat.com> 0.27-0
changelog:
  - Use docbook-style-xsl: this will break formatting.
  - Update custom xsl to use docbook-xsl-1.73.2: this will break formatting.
  - Remove CATALOGS override
  - Remove Red Hat specific clause from Makefile.common
  - Fixed invalid xhtml BZ 428931
  - Update License to GPL2
  - Add GPL2 Header to numerous files


author: Jeff Fearn <jfearn@redhat.com> 0.28-0
changelog:
  - Added gpl.txt
  - Fix GPL identifier as GPLv2+
  - Fixed Build root
  - Fix desktop file
  - Added Provides for documentation-devel
  - Fix dist build target
  - Add dist-srpm target
  - fix dist failing on missing pot dir
  - Put docs in sub package
  - Added GFDL to License to cover content and Book_Template directories.
  - Included GFDL txt file
  - set full path to source


author: Jeff Fearn <jfearn@redhat.com> 0.29-0
changelog:
  - Setup per Brand Book_Templates
  - Fix soure and URL paths
  - Use release in source path
  - correct GPL version text and changed file name to COPYING
  - dropped Provides
  - reordered spec file
  - added fdl.txt to tar ball.
  - added fdl.txt to doc package


author: Jeff Fearn <jfearn@redhat.com> 0.29-1
changelog:
  - removed %post and %postun as update-desktop-database is
  -   for desktop files with mime types
  - removed release for source path and tar name
  - fixed package name in desktop file to include -doc
  - switched from htmlview to xdg-open
  - Added xdg-utils requires for doc package


author: Jeff Fearn <jfearn@redhat.com> 0.30-0
changelog:
  - Added missing Requires perl(XML::TreeBuilder)
  - Fix xref to listitem breaking BZ #432574
  - Die with a decent warning when an invalid Brand is chosen. BZ #429236
  - Modified title page of PDF. BZ #429977
  - Fix PDF list white space issue BZ #429237
  - Fix PDF ulinks too big for tables BZ #430623
  - Allowed rev history to be in any file BZ #297411
  - Fix keycap hard to read in admon BZ #369161
  - Added per Brand Makefile
  - Add per Brand xsl files
  - Added Requires elinks (used for formatted text output)
  - Handle different FOP versions
  - Fix PDF issue with nested images
  - Added id_node to clean_ids to use none title nodes for id's BZ #434726
  - Fix footnotes being duplicated in wrong chunks BZ #431388
  - fixed bold text CSS bug for BZ #430617


author: Jeff Fearn <jfearn@redhat.com> 0.31-0
changelog:
  - Fixed Project-Id-Version not being set on PO creation BZ #435401
  - Fixed java slowing down every make run BZ #435407
  - cleanIds now sets format for imagedata
  - Fixed Desktop RPM build errors
  - Added param DOC_URL BZ #437705
  - Changed Default DOC_URL to publican web site
  - Fixed perl-SGML-Translate file conflict
  - Removed --nonet from xsltproc call BZ #436342
  - Removed extra files logic from spec and xsl files.


author: Jeff Fearn <jfearn@redhat.com> 0.33-0
changelog:
  - Remove release from package name in html desktop spec file
  - Removed --nonet from xsltproc call BZ #436342
  - Add Desktop css customisations


author: Jeff Fearn <jfearn@redhat.com> 0.34-0
changelog:
  - Fix PO file name missing from translation status report
  - Modify xmlClean to output dummy content for empty files (beta)
  - Default SHOW_UNKNOWN tags off
  - Make unset entity warnings more obvious
  - Make docs use DESKTOP styles
  - Fix missing list image in html-single articles
  - Commented out debug output in chunking xsl
  - QANDA set html and css fix BZ #442674
  - Fix kde requires. BZ #443024
  - Add default FOP xconf file.
  - Added help_internals target.
  - Added check for banned tags.
  - Added --lang to create_book BZ #444851
  - Added package tag BZ #444908
  - Added ability to ship $lang/files directories with html/xml payloads BZ #444935
  - Hardcoded PDF footnote colour to black BZ #446011
  - Set segmentedlist.as.table to 1. BZ #445628
  - Force monospace on command
  - Switched to FOP 0.95Beta
  - Fixed crash bug on files names with parentheses BZ #447659
  - Fix loose directory name matching when exluding directiories.
  - Added GENERATE_SECTION_TOC_LEVEL to allow section level TOC control. BZ #449720
  - Banned inlinegraphic. BZ #448331
  - Added Article and Set Templates
  - Banned xreflabel and endterm. BZ #452051
  - Generate FOP config file and font-metricfiles as build. BZ #451913
  - Changed HTML and PDF common brand to more pleasing colors. BZ #442675 
  - Fixed incorrect PDF colours on Fedora and Common brands. BZ #442988
  - Fixed PDF TOC missing Chapter numbers on Sections. BZ #452802
  - Fixed spaces being removed between inline tags. BZ #453067
  - Changed TOC layout (bold chapters + spacing). BZ #453885
  - Changed title spacing, unbolded figure/table titles.
  - Fix over size images breaking PDF and HTML layouts
  - Add missing make Requires. BZ #454376
  - Added call to aspell to spell check.
  - Fixed incorrect other credit title in PDF. BZ #454394
  - Turned on Hyphenation to split verbatim lines.
  - Added code highlighting to CSS and PDF
  - Remove trailing '.' from formal para title. BZ #455826
  - Restructure CSS for easier maintenance of brands
  - Add documentation on publican design philosophy. BZ #456170
  - Italicised package tag. BZ #442668
  - Updated documentation descriptions of Book_Info.xml tags. BZ #456489 BZ #456488


author: Jeff Fearn <jfearn@redhat.com> 0.35-0
changelog:
  - Add missing xerces-j2 Requires. BZ #457497
  - Fixed css path for tranlation reports.
  - Fixed font path for Fedora, ensured build fails if font metric creation fails. BZ #458003
  - Set vertical-align:top for TD - BZ #457851
  - Added WARNING for ENTITIES declared in XML files. BZ #456170
  - Added check to ensure PRODUCT has a valid format.
  - Only check xml files for revision history. BZ #458740
  - Made VERSION and RELEASE over-rideable. BZ #458421
  - Fixed display of OL nested in UL. BZ #457915
  - Added "make pom" to output a basic maven pom file.
  - Updated doco. BZ #458764
  - Updated Conventions.xml. BZ #456026 #459216
  - Made PDF and HTML display product version in similar style. BZ #456486
  - Remove ID's from common files. BZ #460770
  - Allowed footnote to keep ID. BZ #460790
  - Fixed bogus verbatim layout. BZ #460771


author: Jeff Fearn <jfearn@redhat.com> 0.37
changelog:
  - Fix Bug in web rpm upgrade script.
  - Fix Article not building rpms.
  - Switch ja-JP  font name in pdf from SazanamiMincho to SazanamiGothic
  - Remove empty para tags to break en-US HTML build so writers stop breaking translations.
  - Changed docs reference from --revision to --edition for create_book option
  - Fixed Article layout not matching Book Layout. BZ #460969
  - Fixed Part not ledded properly in TOC BZ #460976
  - Fix duplicate IDs in XHTML output.
  - Made background of remark a pretty yellow. BZ #459213
  - Fix Accessibility typo. BZ #460856
  - Fix spurious hyphenation in verbatim.
  - Fix broken RPM packages when titles have been translated.
  - Fix display bug in html-single. BZ #461375
  - Added FAQ entry for Java weirdness. BZ #460738
  - Add default encoding to XML files. BZ #461379
  - Removed corpauthor from template. BZ #461222
  - Fixed create_book help text. BZ #460736
  - Added menuchoice tag. BZ #459671
  - Removed unused scripts entity2pot and po2entity


author: Jeff Fearn <jfearn@redhat.com> 0.38
changelog:
  - Fix inline tags removing following new line in verbatim tags. BZ #461369
  - Fix Numeration settings for HTML ordered lists. BZ #462601
  - Fix PDF Example background color. BZ #463127
  - Fix list item spacing. BZ #462673
  - Fix translation report error on 2 charater langs, CSS, and layout. BZ #465201
  - Added error for tgroup.cols not matching entry count. BZ #462205
  - Fix TOC padding for appendix and glossary. BZ #462991
  - Made comments in highlighted code more prominent. BZ #462552
  - Added citerefentry, refentrytitle, and manvolnum to list of QA'd tags. BZ #464038
  - Fixed '1' in ulink with no text. BZ #465411
  - Change env path to be more portable. Patch by Artem Zolochevskiy . BZ #466194
  - Added package meta to XHTML to allow content to be tracked to an RPM.
  - Added catch for missing title and productname.
  - Changed Formal Para Title to follow parent indent. BZ #466309
  - Fix xmlClean not handling entity names with underscores or numbers. BZ #466994
  - Fix clean_ids removing comments. BZ #467145
  - Fix missing revhistory giving useless error. BZ #467147
  - Stopped proecssing xml files in extras directory.
  - Added conditional tagging to user Guide. By Don Domingo.


author: Jeff Fearn <jfearn@redhat.com> 0.39
changelog:
  - Disable make.graphic.viewport. BZ #467368
  - Add missing XEP namespace. BZ #467256
  - Add catch for ValidateTables where table for tgroup could not be found. BZ #468789
  - Fix right margin error on verbatim and admonitions in PDF. BZ #467654
  - Added foreignphrase to list of validated tags.
  - Add foreignphrase, acronym, hardware to list of tags aspell should ignore.
  - Fixed left align of verbatim items in notes.
  - Fixed contrib class in CSS. BZ #469595
  - Changed para & simpara to div in HTML. BZ #469286
  - Fix layout of author in Revision History. BZ #469986
  - Validated function tag. BZ #471144
  - Fixed menu entry text. BZ #470967
  - Validated type, methodname, excAppendix.xmleptionname, varname, interfacename tags. BZ #461708
  - Banned glosslist (untranslatable) BZ #461864
  - Validated uri, mousebutton, hardware tags. BZ #461870
  - Validated othername tag. BZ #464315
  - Removed collab from front page to match PDF output. BZ #469298
  - Formalised handling of draft mode, root node only. BZ #468305
  - Removed old help text from create_book and make type case insensitive. BZ #471776
  - Fixed footnote numbers collapsing together. BZ #462668
  - Fix translation report for po in nested directories.
  - Changed Formal Para Title to follow parent indent. BZ #466309
  - Validated qandadiv, tweaked layout. BZ #472482
  - Handle xslthl:annotation. BZ #472500
  - Fix dot on docnav css. BZ #472627
  - Fix ol display in article. BZ #472491
  - Added section of Drafting rules. (bforte)
  - Fix CCS display of image in term.
  - Add product URL. Modify header to use product url.
  - Fix formalpara missing div. BZ #473843
  - Fix OL missing margin in article. BZ #473844


author: Jeff Fearn <jfearn@redhat.com> 0.40
changelog:
  - Fix DRAFT mode in web docs.
  - Fix TOC CSS spacing.
  - Fix missing syntax highlighting templates. BZ #474077
  - Added appendix to user guide for Makefile parameters. BZ #476913
  - Fix multiple authors in revhistory. Patch by: Paul W. Frields. BZ #478552
  - Add LICENSE override for RPMs. BZ #477720
  - Fix empty change log. BZ #477728
  - Fix spec file location. BZ #477704
  - Added newline after country. BZ #477573
  - Fix minimum font size breaking TOC. BZ #476884
  - Fix missing font-metric files. BZ #479592
  - Updated redhat brand license. BZ #478405
  - Update jboss brand license. BZ #478416
  - Ship PDF with Indic web packages.


author: Jeff Fearn <jfearn@redhat.com> 0.41
changelog:
  - Fix Source tar name.
  - Fix brew srpm path
  - Added OS_VER to allow over ride of OS srpm is created for.


author: Jeff Fearn <jfearn@redhat.com> 0.42
changelog:
  - Support chapterinfo, keywordset & keyword tags.
  - Add SRC_URL. BZ #482968
  - Fix web package removal when dep package has been removed.


author: Jeff Fearn <jfearn@redhat.com> 0.43
changelog:
  - Fix many warnings about 'body-start() called from outside an fo:list-item' BZ #484628
  - Fix Initial build of new lang failing. BZ #485179
  - Add lang to final doc root node. BZ #486162
  - Add embed for stanky IE. BZ #486501
  - Add symlinks for langauges without country codes. BZ #487256
  - Add rudimentary Obsoletes logic. RT #36366
  - Rolled in following from fedora devel spec
  - - Mon Feb  9 2009 Jens Petersen <petersen@redhat.com> - 0.40-4
  - - update the sazanami-fonts subpackage names
  - - list liberation-fonts subpackages explicitly
  - - Fri Feb  6 2009 Alex Lancaster <alexlan[AT]fedoraproject org> - 0.40-3
  - - Fix broken font deps: liberation-fonts -> liberation-fonts-compat
  - - Sat Jan 24 2009 Caolán McNamara <caolanm@redhat.com> - 0.40-2
  - - cjkunifonts-uming -> cjkuni-uming-fonts
  - - Thu Jan 22 2009 Alex Lancaster <alexlan[AT]fedoraproject org> - 0.40-1
  - - Font changes baekmuk-ttf-fonts-batang -> baekmuk-ttf-batang-fonts to
  -   fix broken deps in rawhide
  - Fri Mar 6 2009 Piotr Drąg <piotrdrag@gmail.com>
  - Translate Document Conventions into Polish
  - Thu Mar 5 2009 Piotr Drąg <piotrdrag@gmail.com>
  - Translate common Feedback section into Polish
  - Wed Mar 4 2009 Richard van der Luit <zuma@xs4all.nl>
  - Corrections to Document Conventions in Dutch
  - Mon Mar 2 2009 Richard van der Luit <zuma@xs4all.nl>
  - Translate Document Conventions into Dutch
  - Sat Feb 28 2009 Rui Gouveia <rui.gouveia@globaltek.pt>
  - Translate Document Conventions into European Portuguese


author: Jeff Fearn <jfearn@redhat.com> 0.45
changelog:
  - Add keep-together.within-column="always" to step. BZ #492021
  - Fix right to left fo ar-AR. BZ #486162
  - Patches and translations by Muayyad Alsadi <alsadi@ojuba.org> 
  - Added missing doccomment and number to PDF highlight. BZ #491241
  - Fix files dir missing from RPMs. BZ #492034


author: Jeff Fearn <jfearn@redhat.com> 1.0-0
changelog:
  - Add base langauge summary & descriptions to translated spec file. BZ #515573
  - Fix translated package build failure.
  - Change tabs to spaces in generated spec files.
  - Fix Locale::Maketext::Gettext dep being missed on RHEL.
  - Fix common paths on Windows
  - Added docbook-style-xsl dep for version 1.75.1+
  - POD fix from Mikhail Gusarov <dottedmag@dottedmag.net>
  - Added processing file message to update_pot. BZ #518354
  - add EPUB stub
  - Clean up Copyright in numerous files.
  - Add security callback for exslt:document.
  - Update XML::LibXML & XML::LibXSLT minimum versions to 1.67
  - Fix rounded corners in HTML. BZ #509768
  - Fix nested images breakin in PDF. BZ #491782
  - Remove border from HTML table for simplelist. BZ #502126
  - Fix remarks not being highlighted in PDF. BZ #509307
  - Resize shade.verbatim font size. BZ #497462
  - Change step page size limitation to para size limitation. BZ#492984
  - Add warning message for missing images. BZ #495821
  - Fix fuzzy images. BZ #479794
  - swap from paths from Publican to publican and obsolete beta packages.
  - Fix large example PDF issue. BZ #531685


author: Jeff Fearn <jfearn@redhat.com> 1.2-0
changelog:
  - Fix images missing from distributed set output. BZ #532837
  - Correct image path when running clean_ids.
  - Fix typo in format description. BZ #532379
  - Add comment to clean.
  - force package to run clean to avoid stale content. BZ #538676


author: Jeff Fearn <jfearn@redhat.com> 1.3-0
changelog:
  - Fixed --version BZ #533081
  - Fixed empty params in new book cfg file. BZ #533322
  - Fixed clean_ids taking too long.
  - Added nowait option for brew.
  - Improved epub support. BZ #536706
  - Add missing rpm-build req. BZ #537970
  - Changed ol ol style. BZ #537256
  - Fix missing revision history field crash. BZ #539741
  - Fix bug in condition logic in XmlClean. BZ #540685
  - Add translation stats. BZ #540696
  - Stopped processing xml files in extras dir. BZ #540383
  - Fixed callout rendering. BZ #531686
  - Fix wrong docs for condition usage. BZ #540691
  - Remove list style from stepalternatives. BZ #511404
  - Force step::para to keep-with-next if followed by a figure.
  - Edited Conventions.xml.
  - Exclude Legal_Notice.xml from pot creation.
  - Fix nested XML breaking translations.
  - Fix syntax highlighting adding whitespace. BZ #544141
  - Better error message for Kate language mismatch.


author: Jeff Fearn <jfearn@redhat.com> 1.4-0
changelog:
  - Ignore obsolete entries in stats code. BZ #546130
  - Fix valid_lang matching on unknown languages.
  - Fix invalid tag in DTD. BZ #548629
  - Added contrib to translation tag list. BZ #550460
  - Added firstname, lastname, orgname to translation tag list. BZ #555645
  - Remove comments from translations. BZ #555647
  - Fix content in root nodes not being added to pot. BZ #554261
  - Fix mixed mode content being dropped when merging translations. BZ #549925
  - Fix ID creation in refentry. BZ #553085
  - Add gettext Requires. BZ #550461
  - Fix non-default tmp dir. BZ #551974
  - Fix validation output. BZ #556684
  - Fix tag attributes breaking translation merge. BZ #554230
  - Format XML when running create. BZ #556201
  - Switch Japanese font to ipa-gothic-fonts on Fedora.
  - Fix Japanes mono/proportional font selection.
  - Add TTC build time script. BZ #557336
  - Add check for main file before parsing.
  - Add check for OS before running FOP.


author: Jeff Fearn <jfearn@redhat.com> 1.5-0
changelog:
  - Croak if profiling would remove root node.
  - Add Archive::Zip to Build.pl
  - Fix --config and add to help text
  - Force footnotes and indexterms to be inline for translations. BZ #563056
  - Add CVS package option. RT #59132
  - Fix white space issues in abstract. BZ #559823
  - Fix translation strings not matching correctly BZ #563397
  - Fix entity with underscore. BZ #561178
  - Fix config values of zero being ignored. BZ #564405
  - Fix footnote number missing in footer. BZ #565903
  - Fix duplicate text in callouts. BZ #561618
  - Remove outdated references to catalogs parameter. BZ #565498
  - Fix white space in book name breaking creation.
  - Fix nested tag with similar name breaking translation. BZ #568201
  - Fix translated packages using source version.
  - Switch from object to iframe BZ #542524
  - More accurate word counts for translations reports.


author: Jeff Fearn <jfearn@redhat.com> 1.6.1-0
changelog:
  - Fix package_brand including unwanted files. BZ #570715
  - Fix empty lines breaking callouts. BZ #570046
  - Detect verbatim content in translatable content. BZ #571633
  - Fix missing IO::String requires properly. BZ #568950
  - Add print style sheet to XHTML. RT #60327
  - Force UTF8 on all files. BZ #570979
  - Fix comments in callout breaking build. BZ #572047
  - Fix table border display. BZ #572995


author: Jeff Fearn <jfearn@redhat.com> 1.6.2-0
changelog:
  - Fix hyphenate.verbatim running out of depth. BZ #577095
  - Fix UTF8 error in translations. BZ #576771
  - Add surname and othername to translatable tag list. BZ #578343
  - No fuzzy strings in merged XML. BZ #578337
  - Allow clean_ids to add entity reference. BZ #576462
  - Added --quiet and --nocolours. BZ #578366


author: Jeff Fearn <jfearn@redhat.com> 1.6.3-0
changelog:
  - Disable verbatim hyphenation. BZ #577068
  - Fix anchors breaking HTML. BZ #579069
  - Fix common options not in help text.
  - Fix formatting of abstract in spec. BZ #579928
  - Translate verbatim tags. BZ #580360
  - Add print_unused option. BZ #580799
  - Overwrite zero length PO files. BZ #581397
  - Fix citerefentry breaking translation. BZ #581773
  - Fix reference bug in html-single.
  - Added print_known and print_banned actions.
  - Fix typo in POD. Raphaël Hertzog <hertzog@debian.org>
  - Fix indexterm translation. BZ #582255
  - Fix non-breaking space being treated like normal white space. BZ #582649
  - Fix webkit & pdf table borders. BZ #585115
  - Make indexterm translatable. BZ #582680
  - Make keyword translatable. BZ #583224
  - Add Eclipse help target. BZ #587489
  - Convert MAX_WIDTH to a parameter max_image_width. BZ #580774
  - Add confidential text to title, first, and blank pages in PDF. BZ #588980
  - Add confidential_text parameter. BZ #588980
  - Fix article list formatting in HTML. BZ #588999
  - Fix epub validation issues. BZ #589333
  - Fix xref to term with indexterm BOOM. BZ #580751
  - Fix keyword highlight breaking callouts. BZ #590933
  - Fix right icon misaligned. BZ #590964


author: Jeff Fearn <jfearn@redhat.com> 2.0-0
changelog:
  - Add Publican::Website.
  - Add web_*_label params for web menus.
  - Add underscores to cleanset, installbrand, and printtree. BZ #581090
  - Update docs with Website content
  - Update brand license text.
  - Fix different log jar path on F14+
  - Add constraint to help_config output.
  - Fix segfault when indexterm has no leading content. BZ #592666
  - Fix inline indexterm. BZ #592823
  - Translate productname tag. BZ #592669
  - Fix formalpara missing ID. BZ #595564
  - Add dummy lang.css to avoid 404's. BZ #595799
  - Improve validation error message. BZ #593887
  - Fix qandaentry ID. BZ #593892
  - Fix Icon non-conformance. BZ #593890
  - Fix admonitions splitting across pages. BZ #596257
  - Fix HTML simple list border. BZ #599258
  - Fix formal object IDs. BZ #601363
  - Fix Revision History layout. BZ #559787 #598828 #598833
  - Remove title color from term in HTML. BZ #592822
  - Fix highlight breaking callouts. BZ #590933
  - Add support for LineColumn coords in area tag.
  - Update font requires for F12 and F13.
  - Fix clean_ids adding newline to verbatim. BZ #604465
  - Fix index missing ID. BZ #606418
  - Fix files dir being missed. BZ #609345
  - Adjust admonition layout.


author: Jeff Fearn <jfearn@redhat.com> 0.8-0
changelog:
  - Setup per Brand Book_Templates
  - Fix soure and URL paths
  - Use release in source path
  - add OPL text as COPYING


author: Jeff Fearn <jfearn@redhat.com> 0.9-0
changelog:
  - Added PRODUCT entity with default msg. BZ #431171
  - Added BOOKID entity with default msg. BZ #431171
  - Fix keycap hard to read in admon BZ #369161
  - Added Brand Makefile
  - Added DocBook 4.5 DTD and 1.72.0 xsl


author: Andy Fitzsimon <afitzsim@redhat.com> 0.11-0
changelog:
  - optimised default stylesheet colours
  - author group improvements
  - formatting for revision history 
  - merged tocnav and documentation.css to defauly.css
  - updated icons
  - Fix doc URL


author: Jeff Fearn <jfearn@redhat.com> 0.13-0
changelog:
  - Fix missing list image in html-single articles
  - QANDA set css fix BZ #442674
  - Removed entities requiring mandatory override
  - Override PDF Theme
  - Added package tag BZ #444908
  - Added Article and Set Templates
  - Added code highlighting to CSS
  - Modify CSS to use new easier maintenance system.


author: Jeff Fearn <jfearn@redhat.com> 0.14-0
changelog:
  - Fix styles for publican 0.35 mods
  - Switch from html-single to html-desktop. BZ #458743
  - Removed common entity files as they break translation
  - Remove ID's from common files. BZ #460770


author: Jeff Fearn <jfearn@redhat.com> 0.18
changelog:
  - Updated redhat brand license. BZ #478405
  - Add LICENSE override for RPMs. BZ #477720
  - Fix layout issue in Legal Notice. BZ #477573


author: Rüdiger Landmann <r.landmann@redhat.com> 1.8
changelog:
  - remove reference to OPL licence
  - add max_image_width for BZ#580774
  - add confidential_text for BZ#588980


author: Pierre Ossman <drzeus@drzeus.cx> 0.8.1-1
changelog:
  - Update to 0.8.1
  - Split into more packages
  - Remove the modules' static libs as those shouldn't be used (they shouldn't
    even be installed)


author: Pierre Ossman <drzeus@drzeus.cx> 0.9.3-1
changelog:
  - Update to 0.9.3
  - GLib 1.2 bindings dropped.
  - Howl compat dropped as Avahi is supported natively.
  - Added fix for pc files on x86_64.


author: Pierre Ossman <drzeus@drzeus.cx> 0.9.5-3
changelog:
  - Add esound-compat subpackage that allows PulseAudio to be a drop-in
    replacement for esd (based on patch by Matthias Clasen).
  - Backport patch allows startup to continue even when the users'
    config cannot be read.


author: Pierre Ossman <drzeus@drzeus.cx> 0.9.5-4
changelog:
  - Add patch to handle ALSA changing the frame size (bug 230211).
  - Add patch for suspended ALSA devices (bug 228205).


author: Lennart Poettering <lpoetter@redhat.com> 0.9.7-0.2.svn20070812
changelog:
  - Update snapshot, contains 64 bit build fixes, and disables module-x11-xsmp by
    default to avoid deadlock when PA is started from gnome-session


author: Lennart Poettering <lpoetter@redhat.com> 0.9.7-0.3.svn20070812
changelog:
  - Depend on tcp_wrappers-devel instead of tcp_wrappers, to make sure we
    actually get the headers installed.


author: Lennart Poettering <lpoetter@redhat.com> 0.9.7-0.9.svn20070904
changelog:
  - Update SVN snapshot
  - ship libflashsupport in our package
  - drop pulseaudio-devel since libpulsecore is not linked statically


author: Lennart Poettering <lpoetter@redhat.com> 0.9.7-0.12.svn20070925
changelog:
  - New SVN snapshot
  - Split off libflashsupport again
  - Rename "-lib" packages to "-libs", like all other packages do it.
  - Provide esound


author: Lennart Poettering <lpoetter@redhat.com> 0.9.7-0.16.svn20071017
changelog:
  - Another SVN snapshot, fixing another round of bugs (#330541)
  - Split libpulscore into a seperate package to work around multilib limitation (#335011)


author: Lubomir Kundrak <lkundrak@redhat.com> 0.9.8-4.1
changelog:
  - Actually add content to pulseaudio-0.9.8-create-dot-pulse.patch
  - Make the Source0 tag point to URL instead of a local file
  - Drop the nochown patch; it's not applied at all and no longer needed


author: Lubomir Kundrak <lkundrak@redhat.com> 0.9.8-8
changelog:
  - Fix multilib issue (#228383)
  - Prevent dumping core if exiting sooner that ltdl initializaion (#427962)


author: Adam Jackson <ajax@redhat.com> 0.9.8-11
changelog:
  - pulseaudio-0.9.8-disable-realtime.patch: Don't ask PolicyKit for increased
    scheduling mojo for now.  It's not clear that it's a win; and if it is,
    the policy should just be fixed to always allow it.


author: Mihai Ibanescu <misa@redhat.com>
changelog:
  - Building 0.5.1rc1 with version number 0.5.0.91 (this should also fix the big
    error of pushing 0.5pre previously, since it breaks rpm's version comparison
    algorithm).
  - We use %{__python}. Too bad I can't pass --define's to distutils.


author: Mihai Ibanescu <misa@redhat.com>
changelog:
  - Fix for bug 73967: site-packages/OpenSSL not owned by this package
  - Adding hacks around the lack of latex2html on ia64


author: Mihai Ibanescu <misa@redhat.com> 0.5.1-12
changelog:
  - lynx no longer supported, using elinks instead (patch from
    Michael Redinger <michael.redinger@uibk.ac.at>, bug #101947 )


author: Paul Howarth <paul@city-fan.org> - 0.6-1.p24.9
changelog:
  - add missing buildreq latex2html, needed to build HTML docs
  - rewrite to be more in line with Fedora python spec template and use
    %{python_sitearch} rather than a script-generated %files list
  - package is not relocatable - drop Prefix: tag
  - buildreq perl not necessary
  - fix permissions for files going into debuginfo package


author: Matthew Barnes <mbarnes@redhat.com> - 2.15.1-1.fc10
changelog:
  - Update to 2.15.1
  - Bump glib2_version to 2.16.0.
  - Remove ancient automake_version.
  - Add a pygobject2-codegen subpackage.


author: - Matthew Barnes <mbarnes@redhat.com> - 2.16.0-1.fc11
changelog:
  - Update to 2.16.0
  - Remove patch for RH bug #457502 (fixed upstream).
  - Remove patch for GNOME bug #551059 and #551212 (fixed upstream).


author: Owen Taylor <otaylor@redhat.com> - 2.20.0-4.el6
changelog:
  - Build without gobject-introspection support, the form of support
    in 2.20 was subsequently removed upstream.
    Resolves: rhbz 555583


author: Toshio Kuratomi <toshio@tiki-lounge.com> - 0.1-3
changelog:
  - Add a patch to work under Python 2.3.
  - Stop shipping the tests as they are useless to the end user.


author: Toshio Kuratomi <toshio@fedoraproject.org> - 0.1-16.20090824bzr68
changelog:
  - Rebase to new upstream snapshot
  - Patches merged upstream
  - Fixes deprecation warnings on py2.6/py3.0
  - Remove py2.3 patch -- only needed for EPEL-4


author: Matt Wilson <msw@redhat.com>
changelog:
  - fixed typo in devel filelist
  - added macro that tests to see if we have libglade2, make the
    filelist a condition of that
  - changed name to 'pygtk2' to avoid name conflict with pygtk


author: Matt Wilson <msw@redhat.com> 1.99.16-1
changelog:
  - added a compatibility function for gtk.gdk.gc_new() so we won't have
    to fix all our code quite yet


author: Mark McLoughlin <markmc@redhat.com> - 2.5.3-2
changelog:
  - Backport fix for gnome #154779 - python signal handlers weren't
    getting executed while gobject.MainLoop was running


author: John (J5) Palmieri <johnp@redhat.com> - 2.7.3-3
changelog:
  - Add a BuildRequires on python-numeric so that Numeric
    python support is added
  - Add a Requires on python-numeric as well


author: Matthew Barnes <mbarnes@redhat.com> - 2.10.3-1.fc7
changelog:
  - Update to 2.10.3
  - Spec file cleanups.
  - Define a python_sitelib macro for files under site_packages.


author: Matthew Barnes <mbarnes@redhat.com> - 2.12.1-1.fc9
changelog:
  - Update to 2.12.1
  - Remove patch for RH bug #217430 (fixed upstream).
  - Remove patch for GNOME bug #479012 (fixed upstream).


author: Matthew Barnes <mbarnes@redhat.com> - 2.13.0-2.fc10
changelog:
  - Restore pycairo and pygobject2 requirements, with a note to myself
    to stop screwing around with them (RH bug #460105).


author: Adam Jackson <ajax@redhat.com> 2.15.2-4
changelog:
  - Drop the explicit Requires: numpy as per new packaging guidelines.  If
    your app calls gtk.gdk.get_pixels_array() you need to pull numpy in
    yourself.


author: Chris Lumens <clumens@redhat.com> 0.2-1
changelog:
  - Rename module to pykickstart to avoid conflicts in anaconda.
  - Rename data classes for consistency.
  - Add default bytesPerInode settings.


author: Chris Lumens <clumens@redhat.com> 0.3-1
changelog:
  - Add a deprecated attribute to options.
  - Add --card option back to xconfig and mark as deprecated.
  - Throw a deprecation warning on mouse and langsupport commands.
  - Rename Writer to KickstartWriter for consistency.
  - Collapse scripts into a single list and add an attribute on Script to
    differentiate.


author: Chris Lumens <clumens@redhat.com> 0.7-1
changelog:
  - Fix clearpart --all.
  - vnc command does not require --connect option (#172192).
  - network --onboot does not take any option.
  - Remove extra spaces from firewall --ports and --trust.
  - Write out network --<service> options.


author: Chris Lumens <clumens@redhat.com> 0.8-1
changelog:
  - Default to SELINUX_ENFORCING.
  - Default partition sizes to None for anaconda (#172378).
  - Don't call shlex.split on anything inside a script (#172313).


author: Chris Lumens <clumens@redhat.com> 0.13-1
changelog:
  - Recognize the --eject parameter to shutdown/halt.
  - Store the exact post-installation action in ksdata.


author: Chris Lumens <clumens@redhat.com> 0.18-1
changelog:
  - Fix some errors pychecker caught.
  - Allow exceptions to not be fatal so ksvalidator can spot more errors in
    a single pass (#179894).


author: Chris Lumens <clumens@redhat.com> 0.21-1
changelog:
  - Provide an option to not traceback on missing include files (#181760).
  - Update programming documentation.


author: Chris Lumens <clumens@redhat.com> 0.24-1
changelog:
  - Don't write out a blank xconfig line.
  - Reorder output handlers to group like commands together.
  - Mark strings for translation.


author: Chris Lumens <clumens@redhat.com> 0.26-1
changelog:
  - Ignore spaces before group names (#188095).
  - Added some translations.
  - Add options for repo command.
  - Reorder %packages section output.
  - Output %packages header options.
  - Initialize RAID and volume group members to empty lists.


author: Chris Lumens <clumens@redhat.com> 0.30-1
changelog:
  - Change order of LVM-related writing functions (#193073).
  - Require urlgrabber.
  - Return a more useful error message on unknown commands.
  - Fix logvol writing typo.
  - Make ksvalidator validate from a URL in addition to a file.
  - Don't write out an empty packages section (#192851).


author: Chris Lumens <clumens@redhat.com> 0.30-2
changelog:
  - Add BuildRequires to fix building under mock (#194156,  Joost Soeterbroek
    <fedora AT soeterbroek.com>).


author: Chris Lumens <clumens@redhat.com> 0.31-1
changelog:
  - Handle nfs --opts (katzj).
  - RAID devices should be integers instead of strings (#176537).
  - Add initial support for iscsi (katzj).


author: Chris Lumens <clumens@redhat.com> - 0.90-1
changelog:
  - Support multiple versions of kickstart syntax from one code base
    (#189348).
  - Fix inconsistency between Script parser and writer (#222877).


author: Chris Lumens <clumens@redhat.com> - 0.92-1
changelog:
  - Fix KickstartVersionError reporting.
  - Add a version attribute to handler objects.
  - Fix line number reporting on lots of commands.
  - Add initial support for Fedora 7 and remove deprecated commands.
  - Accept a --default argument to the %packages header (#221305).


author: Chris Lumens <clumens@redhat.com> - 0.93-1
changelog:
  - Add support for FC3, RHEL4, and RHEL5.
  - The key command was not supported until after FC6.
  - Accept more strings in stringToVersion.


author: Chris Lumens <clumens@redhat.com> - 0.94-1
changelog:
  - Add a newline to the end of the key command output.
  - Use network bootproto constants (#197694).
  - Fix tracebacks in subclass __str__ methods (#226734).


author: Chris Lumens <clumens@redhat.com> - 0.95-1
changelog:
  - KickstartParser no longer takes a version argument.
  - Be more lenient in what strings stringToVersion accepts.
  - Allow setting state on one data object from multiple files.


author: Chris Lumens <clumens@redhat.com> - 0.96-1
changelog:
  - Fix __str__ methods for langsupport and reboot commands.
  - Renamed BaseHandler.empty to BaseHandler.maskAllExcept.
  - Split command objects out into their own files in commands/.
  - Rename command objects to start with Version_.
  - Support extended group selection syntax.


author: Chris Lumens <clumens@redhat.com> - 0.99-1
changelog:
  - The timezone command didn't recognize --isUtc before FC6 (#231189).
  - Recognize %ksappend lines in ksvalidator.
  - Don't set default values in some command __init__ methods.
  - Added an updates command.
  - Add support for RAID10.


author: Chris Lumens <clumens@redhat.com> - 0.100-1
changelog:
  - bootloader should be written out after upgrade/install.
  - Treat class names as unicode strings (#231053).


author: Chris Lumens <clumens@redhat.com> - 1.1-1
changelog:
  - Better regexes for splitting version strings into family and version.
  - Add basic support for RHEL3.
  - Update translations.


author: Chris Lumens <clumens@redhat.com> - 1.2-1
changelog:
  - Fix harddrive install method error checking (#232492).
  - Set authentication information from the input line to preserve quoting
    (#241657).
  - Allow included files to be given by URL.
  - Fix typo in user --iscrypted option.


author: Chris Lumens <clumens@redhat.com> 1.7-1
changelog:
  - Clarify license in spec file and all source files.
  - Check string values to options to make sure they're not other options
    (#251318).


author: Chris Lumens <clumens@redhat.com> 1.9-1
changelog:
  - Add support for the %end directive to be placed at the end of scripts
    and packages sections.  Deprecate old syntax.
  - Clean up after ksvalidator if pykickstart issues a traceback.
  - Add support for repo --priority --includepkgs --excludepkgs.
  - Fix newline at end of reboot --eject output (#253562).


author: Chris Lumens <clumens@redhat.com> 1.12-1
changelog:
  - Fix lots of problems in processing the bootloader, device, network, and
    raid commands.
  - Add %end when writing out scripts and packages.
  - Add a makefile target to run pychecker to cut down on errors in
    releases.


author: Chris Lumens <clumens@redhat.com> 1.13-1
changelog:
  - Add a function to convert URL method strings into repo objects
    (jkeating).
  - Writer formatting fixes.
  - Add kickstart documentation from the Fedora Wiki.


author: Chris Lumens <clumens@redhat.com> 1.14-1
changelog:
  - Fix output formatting for packages section header (#310211).
  - Add a script to flatten kickstart files containing includes (katzj).


author: Chris Lumens <clumens@redhat.com> 1.16-1
changelog:
  - Undeprecate %packages --excludedocs.
  - Fix a traceback in the device command handling.
  - Add bootloader --timeout (katzj).


author: Chris Lumens <clumens@redhat.com> 1.18-1
changelog:
  - Don't write out %end to packages and scripts if the syntax version doesn't
    support it.
  - Remove obsolete translation (#332221).


author: Chris Lumens <clumens@redhat.com> 1.20-1
changelog:
  - Pull wiki docs from the new location.
  - Fix error messages for options that have been removed after having been
    previously deprecated.
  - zerombr no longer takes any arguments.
  - %packages --ignoredeps --resolvedeps have been removed.
  - firewall --high --medium have been removed.
  - vnc --connect has been removed.
  - xconfig options from monitor have now been removed.
  - --bytes-per-inode has been marked as deprecated.
  - Fix typos.
  - Add --fsprofile option to disk commands (pjones).
  - Add F9 support (pjones).
  - Lots of internal fixes (clumens, pjones).


author: Chris Lumens <clumens@redhat.com> 1.22-1
changelog:
  - Don't process or write out vnc --enabled (jlaska AT redhat DOT com).
  - Fix a traceback in the clearpart command.


author: Chris Lumens <clumens@redhat.com> - 1.23-1
changelog:
  - Take Makefile improvements from anaconda.
  - Fix a traceback on F9 zerombr command (#395431).
  - Update to handle new Python eggs packaging.


author: Chris Lumens <clumens@redhat.com> - 1.24-1
changelog:
  - Make inheritance and overriding of %packages work (#427768). (clumens)
  - Add an option for which languages should be installed. (katzj)
  - Use the right name for the iscsi --target variable (#418781). (clumens)


author: Chris Lumens <clumens@redhat.com> - 1.25-1
changelog:
  - Add the version to the output ks file. (clumens)
  - Add syntax for encrypted partitions and raid devices. (clumens)


author: Chris Lumens <clumens@redhat.com> - 1.30-1
changelog:
  - Reverse writePriorities of iscsi and iscsname (#434965, jlaska).
  - Fix printing of iscsiname command (#434945, jlaska).
  - Don't traceback on ENOENT. (pnasrat)
  - Store the mouse name as a string, not a list. (clumens)
  - Update translations.


author: Chris Lumens <clumens@redhat.com> - 1.32-1
changelog:
  - Make the string reader act like the file reader upon EOF. (clumens)
  - Add syntax for encrypted logical volumes. (clumens)


author: Chris Lumens <clumens@redhat.com> - 1.33-1
changelog:
  - Fix whitespace when printing out the bootloader command (pmeyers).
  - Fix the type on bootloader --timeout processing. (clumens)


author: Chris Lumens <clumens@redhat.com> - 1.34-1
changelog:
  - Load the handler module automatically. (clumens)
  - Add support for F10. (clumens)
  - Initialize cmd.handler earlier; fixes repo.methodToRepo() (markmc)
  - Don't shadow builtin function names. (clumens)
  - Running check is now required before pykickstart can be packaged. (clumens)
  - Reorganize code a little bit to pass pychecker. (clumens)


author: Chris Lumens <clumens@redhat.com> - 1.35-1
changelog:
  - Bring driverdisk command in line with the docs. (clumens)
  - Change RAID command print priorities (jlaska).
  - According to docs, physvols are space delimited. (jlaska)
  - Don't write the label out twice (jlaska).
  - Deprecate monitor and xconfig commands. (clumens)


author: Chris Lumens <clumens@redhat.com> - 1.40-1
changelog:
  - RHEL5_LogVolData should inherit from FC4, not FC3.
    Also fix FC9->F9 typo. (dlehman)
  - Support creation of encrypted block devices in RHEL5. (#449830) (dlehman)
  - Use the right LogVolData objects for RHEL3 and 4 (jlaska). (clumens)
  - We no longer use rhpl for translations. (clumens)
  - All the base classes should derive from object. (clumens)


author: Chris Lumens <clumens@redhat.com> - 1.41-1
changelog:
  - RHEL5 supports ignoredisk --only-use now too. (clumens)
  - Do not include passphrases for encrypted block devices in
    anaconda-ks.cfg. (dlehman)
  - Fix F9,F10,RHEL5 "part" commands to use the same class as
    "partition". (dlehman)
  - Add an apply method() for commands and implement for lang (katzj)


author: Chris Lumens <clumens@redhat.com> - 1.42-1
changelog:
  - Add rescue command to pykickstart (atodorov)
  - Sort %packages output (katzj)
  - Fix a typo (atodorov).


author: Chris Lumens <clumens@redhat.com> - 1.43-1
changelog:
  - Revert "Do not include passphrases for encrypted block devices in
    anaconda-ks.cfg." (dlehman)
  - yum doesn't like when mirrorlist is "". (clumens)


author: Chris Lumens <clumens@redhat.com> - 1.48-1
changelog:
  - Allow ignoring group metadata from repos, using a '--ignoregroups'
    boolean. (notting)
  - Add initial support for F11.
  - Specify the command versions in the handlers instead of making copies.
  - Remove empty and pointless __init__ methods.
  - Pass arguments to superclasses via *args and **kwargs, all the way up.
  - Add removedKeywords and removedAttrs lists on Commands and Data.
  - Fix version regexes to handle double digits and minor releases (jlaska).


author: Chris Lumens <clumens@redhat.com> - 1.49-1
changelog:
  - Add upgrade --root-device (atodorov, #471232).
  - Use python's builtin set rather than the Sets module (#477836, dcantrell).


author: Chris Lumens <clumens@redhat.com> - 1.50-1
changelog:
  - Add a script to diff two versions of kickstart syntax.
  - Add an option to ksvalidator to list all available syntax versions.
  - Remove a couple extra newlines in output formatting.
  - Add documentation for the new %include representation.
  - Add support %include to the pykickstart data objects.


author: Chris Lumens <clumens@redhat.com> - 1.51-1
changelog:
  - Make a couple changes to how the logging command is handled.
  - Add a lot of test cases (clumens, alindebe, jlaska, fcami, adamwill, pfrields).
  - Fix output formatting for the rootpw command.
  - For commands that take exactly one argument, check and error correctly.
  - Surround module options in quotes on the output side (jlaska).
  - Set module opts in the FC3 handler correctly.
  - Fix newlines on the device command output (jlaska).
  - If --autoscreenshot is not specified, still output "autostep".
  - Move the currentCmd and currentLine into getParser(). (jlaska)
  - Write out an selinux line if set to disabled, but not if None.
  - F9_LogVolData should inherit from FC4_LogVolData, not FC3_LogVolData (jlaska).
  - Add unittest framework along with logvol and vnc unittests. (jlaska)
  - Don't set the KSOption.required attribute in the constructor (jlaska).


author: Chris Lumens <clumens@redhat.com> - 1.52-1
changelog:
  - Add lots more test cases (alindebe, mgracik, stickster).
  - Add a skip attribute on key to shut up pychecker.
  - Only show autostep command when requested (jlaska)
  - Strip spaces from service names, and require an option to be provided.
  - Surround services lists in double quotes.
  - Remove the extra space from the services __str__ method.
  - Fix output formatting bugs in firewall, partition, and repo (mgracik).
  - Specifying both or neither of --drives and --only-use should be an error.
  - Corrected newline char in return value of FC6_Method. (mgracik)
  - Make --drives a required option for FC3, and catch no args on F8.
  - Fix final printing of the rescue command (mgracik).
  - Surround output strings in double quotes.
  - Fix a typo in the deviceprobe command.
  - Revert the more strict option processing on displaymode.
  - Properly handle erroring on extra args, not just extra options.
  - Don't use the logging class since it interferes with the logging test.
  - port without host should raise KickstartParseError, not kickstartValueError.
  - Add the --key option to option processing, since it's a valid argument.
  - Fix test cases that were failing due to the new use of KSOptionParser.
  - Teach driverdisk.py command to reject extra partitions (stickster).
  - Add KSOptionParser to all commands ... enables more strick option checking (jlaska).
  - Use KSOptionParser so we can catch bad command options (jlaska).


author: Chris Lumens <clumens@redhat.com> - 1.53-1
changelog:
  - Move lineno= from KSOptionParser.__init__ to parse_args (#497149). (clumens)
  - Use the F11 version of the partition command. (clumens)
  - Remove the --start and --end options since anaconda no longer uses them. (clumens)
  - Remove a broken test case. (clumens)


author: Chris Lumens <clumens@redhat.com> - 1.55-1
changelog:
  - Add support for the group command to F12 (#509119).
  - RHEL5 now supports RAID 10.
  - The f12 hander class should be called F12Handler. (jgranado)
  - Remove bootloader --lba32.
  - Add a new version of the driverdisk command without --type=.
  - Add initial support for F12.
  - Fetch the programmers-guide from the wiki now.


author: Chris Lumens <clumens@redhat.com> - 1.56-1
changelog:
  - Make sure to import the gettext stuff in fcoe. (clumens)
  - Correctly deprecate bootloader --lba32 (jlaska).
  - pykickstart: fix zfcp command writepriority (hdegoede)
  - pykickstart: Add fcoe command (take 2) (hdegoede)
  - Add a test case for RAID (jlaska).


author: Chris Lumens <clumens@redhat.com> - 1.58-1
changelog:
  - Adjust writePriority to fix lvm-on-raid0 test cases (jlaska).
  - Add F12 to the version number tests. (clumens)
  - F12_User test case. (dcantrell)
  - Add --gecos argument to the 'user' command (dcantrell)
  - Convert user.py to use _getArgsAsStr() (dcantrell)


author: Chris Lumens <clumens@redhat.com> - 1.59-1
changelog:
  - Handle a few more places where a urlgrabber error could happen (#512951).
  - Error out if the same partition/repo/network is defined twice (#512956).
  - Call parent class tests first. (jlaska)
  - Add KSOptionParser to FC3 upgrade command. (jlaska)
  - Correct missing return stmt in _getArgsAsStr() (jlaska)


author: Chris Lumens <clumens@redhat.com> - 1.60-1
changelog:
  - Put quotes around the repo's name (Marc.Herbert@gmail.com).
  - Make duplicate entries warnings, not errors (#516338).


author: Chris Lumens <clumens@redhat.com> - 1.62-1
changelog:
  - Support translated help text in optparse (#479519).
  - If the input kickstart file cannot be read, raise IOError (#519477).


author: Chris Lumens <clumens@redhat.com> - 1.63-1
changelog:
  - Add encryption key escrow support (mitr, #508963).
  - Fix the repo test cases to expect quotes around the repo's name.


author: Chris Lumens <clumens@redhat.com> - 1.65-1
changelog:
  - Add additional arguments to BaseHandler.__init__ for better map control.
  - Return the KickstartCommand/KickstartData object from dispatcher.
  - Add an "sshpw" command for changing the passwords in anaconda's env.
  - Add --proxy support to the url and repo commands.
  - Add support for F13.  Is it really that time already?


author: Hans de Goede <hdgoede@redhat.com> - 1.66-1
changelog:
  - Add --dcb option to fcoe command (#513011)
  - Remove rhpl from tests
  - Port bootloader --hvargs option added in rhel5
  - Ignore comments when looking for %ksappend lines (#525676)
  - Use python 2.x exception syntax


author: Chris Lumens <clumens@redhat.com> - 1.67-1
changelog:
  - Don't use action="append_const" in firewall.py.
  - Make "make archive" depend on test and check passing again.
  - versionToString now works in all cases we test for.
  - Fix the few pychecker errors outstanding in options.py.
  - Fix make docs to make docs dir before trying to download files there (hdegoede)


author: Chris Lumens <clumens@redhat.com> - 1.68-1
changelog:
  - Support removing groups that were included by a glob (#554717). (clumens)
  - Make sure that everything in version.versionMap has a handler. (clumens)
  - Add support for RHEL6 (#552230). (clumens)
  - Don't consider RHEL versions as developmental even if they're latest. (clumens)
  - Add lineno to BaseData and derived classes (version 2) (hdegoede)
  - Give the non mandatory iscsi --port argument a sane default (hdegoede)
  - Change python_sitelib macro to use %global for new rpm (hdegoede)
  - Fix typo in iscsi parsing error message (hdegoede)


author: Chris Lumens <clumens@redhat.com> - 1.69-1
changelog:
  - Add driverdisk --biospart= (#570437). (clumens)
  - Fix IOError catching in ksflatten (jgregusk, #558650).


author: Chris Lumens <clumens@redhat.com> - 1.71-1
changelog:
  - Don't overwrite the excluded group list after every %packages line (#577334). (clumens)
  - Add a bunch of test cases for the packages section. (clumens)


author: Chris Lumens <clumens@redhat.com> - 1.74-1
changelog:
  - If an option is deprecated, do not care if it takes a value (#602303). (clumens)
  - Don't compare the dest ("telnet") with the option string ("--telnet"). (clumens)
  - The --connect= parameter wasn't really deprecated in FC6. (clumens)


author: Chris Lumens <clumens@redhat.com> - 1.74.2-1
changelog:
  - Add the documentation from the website to this package. (clumens)
  - F14 TestCase classes won't work on rhel6-branch, use RHEL6. (akozumpl)
  - support noverifyssl on the rhel6-branch (method, repo) (#660340). (akozumpl)
  - method: new parameter '--noverifyssl' after --url. (akozumpl)
  - repo: new parameter '--noverifyssl'. (akozumpl)
  - Add bootloader --iscrypted (#554870). (clumens)


author: Chris Lumens <clumens@redhat.com> 1.74.5-1
changelog:
  - Don't set new attrs on the RHEL6_Network object. (clumens)
  - Add kickstart network --nodefroute option (#668417) (rvykydal)
  - Add support for network --bootproto ibft option (#668417) (rvykydal)
  - Add network --activate option (#668417) (rvykydal)


author: Chris Lumens <clumens@redhat.com> - 1.74.8-1
changelog:
  - Add support for reserved space in volume group. (dlehman)
  - Add --same-as-ram option for swap size specification (#744129) (vpodzime)


author: Chris Lumens <clumens@redhat.com> - 1.74.11-1
changelog:
  - Deprecated options that required a value should still accept one (jbastian).
    Resolves: rhbz#815573
  - Don't error out if volgroup --useexisting is given with no members. (clumens)
    Resolves: rhbz#823856, rhbz#837440
  - Add an argument for specifying the luks algorithm. (clumens)
    Resolves: rhbz#843174
  - bonding support: add network --bondslaves --bondopts options (rvykydal)
    Resolves: rhbz#662007
  - vlan support: add network --vlanid option. (rvykydal)
    Resolves: rhbz#668065
  - Add swap --hibernation to logvol command (vpodzime)
    Resolves: rhbz#848818


author: Chris Lumens <clumens@redhat.com> - 1.74.12-1
changelog:
  - Add cipher option for encrypted autopart. (dlehman)
  - Add support for fcoe --autovlan option (#813998) (rvykydal)
  - add unsupported_hardware command (#824963) (bcl)


author: Chris Lumens <clumens@redhat.com> - 1.74.13-1
changelog:
  - Also fix the version test for RHEL6. (clumens)
  - Fix a couple minor problems pychecker caught. (clumens)
  - Add network --ipv6gateway option (#978252) (rvykydal)
  - fix TypeError in network.py with ipv6 static addresses (#966183). (wwoods)
  - Fix a bug in logvol duplicate reporting (#924579, mhuth). (clumens)


author: Chris Lumens <clumens@redhat.com> - 1.74.14-1
changelog:
  - Add tests for incorrect command usage detection (mkolman)
  - Add class for multi-line command sequence tests (mkolman)
  - Raise an error if autopart is combined with partitioning commands (#886010) (mkolman)


author: Chris Lumens <clumens@redhat.com> - 1.74.16-1
changelog:
  - Add an option to disable even installing the core group. (clumens)
  - Add a new bootloader --disabled option. (clumens)


author: Chris Lumens <clumens@redhat.com> - 1.74.17-1
changelog:
  - Fix small issues with output formatting of the new --cdl option. (clumens)
  - Add clearpart --cdl option. (#1182624) (sbueno+anaconda)


author: Chris Lumens <clumens@redhat.com> - 1.74.18-1
changelog:
  - Add support for specifying thin pool profile (vpodzime)
    Related: rhbz#1083459
  - Add support for custom layouts using lvm thin provisioning. (dlehman)
    Related: rhbz#1083459


author: Chris Lumens <clumens@redhat.com> - 1.74.22-1
changelog:
  - Fix handling # in passwords. (clumens)
    Related: rhbz#1301267
  - Pass comments=True to shlex.split calls in the test functions. (clumens)
    Related: rhbz#1301267


author: Jeremy Katz <katzj@redhat.com>
changelog:
  - Initial build split out into separate source from the parted package.
  - Don't build on ppc64 right now due to parted build problems (#118183)


author: Jeremy Katz <katzj@redhat.com> - 1.6.8-1
changelog:
  - update for new parted ABI
    - device -> heads, sectors, cylinders now refer to the bios geometry
  - require parted >= 1.6.12


author: David Cantrell <dcantrell@redhat.com> - 1.8.0-1
changelog:
  - Bump version to 1.8.0 and require parted >= 1.8.0
  - Remove python-abi Requires line since rpm handles that automatically


author: David Cantrell <dcantrell@redhat.com> - 1.8.1-1
changelog:
  - Determine Python version to use in %build so the source RPM is more
    easily moved between distribution releases.


author: Chris Lumens <clumens@redhat.com> - 2.1.2-1
changelog:
  - Upgrade to pyparted-2.1.2:
        PED_DEVICE_DM is always defined in libparted these days.
        Handle parted exceptions arising from ped_device_get (#495433).


author: David Cantrell <dcantrell@redhat.com> - 2.2-1
changelog:
  - Upgrade to pyparted-2.2:
        Fixes PedDisk2_ped_Disk() and avoids losing disk label data
        in the conversion process (#526999)


author: David Cantrell <dcantrell@redhat.com> - 2.3-1
changelog:
  - Upgrade to pyparted-2.3:
        Remove root user requirement in _ped
        Add testcases for new _ped device methods
        Add python wrapper for new PedDisk partition alignment info function
        Add support for new PedDisk parition alignment info function
        Add python wrappers for new PedDevice alignment info functions
        Add support for new PedDevice alignment info functions
        Fix a whole pile of test cases.
        Remove ped_disk_commit_to_dev() call from py_ped_disk_new_fresh()
        Fix error in Constraint __str__ method
        Make _ped_Device2PedDevice properly set / throw exceptions
        Fixup various errorhandling issues in pydisk.c
        Add missing _ped_Device2PedDevice() retval checks
        Use libparted commit() for parted.disk.Disk.commit() (hdegoede).
  - BR parted-devel >= 1.9.0-20


author: David Cantrell <dcantrell@redhat.com> - 2.4-1
changelog:
  - Upgrade to pyparted-2.4:
        Use PedDevice length instead of DIY (#532023) (hdegoede)
        Use sectorSize not physicalSectorSize for size calculations (hdegoede)


author: David Cantrell <dcantrell@redhat.com> - 2.5-1
changelog:
  - Update release instructions. (dcantrell)
  - Remove old cylinder alignment test cases for _ped. (dcantrell)
  - Add tests for max partition length / start sector (hdegoede)
  - Add _pedmodule and parted functions for max partition length / start
    sector (hdegoede)
  - Remove align_to_cylinders function bindings (hdegoede)
  - Add tests for disk flag methods (hdegoede)
  - Add _pedmodule and parted functions for per disk flags (hdegoede)
  - Every tuple member requires a comma after it. (dcantrell)
  - Fill out a lot of simple _ped.Disk test cases. (dcantrell)
  - Disable DeviceDestroyTestCase for now. (dcantrell)
  - Add RequiresLabeledDevice to tests/_ped/baseclass.py. (dcantrell)
  - Attempt at fixing _ped.Device.destroy(), no dice. (dcantrell)
  - Fix UnitFormatCustomTestCase and UnitFormatTestCase. (dcantrell)
  - Fix UnitFormatCustomByteTestCase and UnitFormatByteTestCase. (dcantrell)
  - Add DeviceStrTestCase, disable DeviceDestroyTestCase. (dcantrell)
  - Add DeviceDestroyTestCase and DeviceCacheRemoveTestCase. (dcantrell)
  - Implemented ConstraintIsSolutionTestCase(). (dcantrell)
  - Implement ConstraintSolveMaxTestCase(). (dcantrell)
  - Implement ConstraintSolveNearestTestCase(). (dcantrell)
  - Correct py_ped_file_system_probe_specific() for NULL returns. (dcantrell)
  - Implement FileSystemProbeSpecificTestCase(). (dcantrell)
  - Implement FileSystemProbeTestCase(). (dcantrell)
  - Add RequiresFileSystem to tests/_ped/baseclass.py. (dcantrell)
  - Add disk alignment test cases in test_ped.py. (dcantrell)
  - Fix CHSGeometryStrTestCase(). (dcantrell)
  - Fix ConstraintDuplicateTestCase...finally. (dcantrell)
  - Put a deprecation warning in py_ped_constraint_duplicate(). (dcantrell)
  - Note that we need parted from Fedora for pyparted. (dcantrell)
  - Fix UnitGetSizeTestCase in _ped test cases for _ped.UNIT_PERCENT.
    (dcantrell)
  - Add testcase for new _ped disk get_partition_alignment method (hdegoede)


author: Hans de Goede <hdegoede@redhat.com> - 2.5-3
changelog:
  - Change python_sitearch macro to use %global as the new rpm will break
    using %define here, see:
    https://www.redhat.com/archives/fedora-devel-list/2010-January/msg00093.html


author: Hans de Goede <hdegoede@redhat.com> - 2.5-4
changelog:
  - Rebuild for new parted-2.1
  - Remove py_disk_clobber_exclude function binding, as this function was
    removed from parted-2.1


author: David Cantrell <dcantrell@redhat.com> - 3.4-2
changelog:
  - Return PED_EXCEPTION_NO for interactive yes/no exceptions, pass
    appropriate exception to caller
    Resolves: rhbz#575749


author: Jeremy Hylton <jeremy@beopen.com>
changelog:
  - Version 2 of 2.0b1
  - Make the package relocatable.  Thanks to Suchandra Thapa.
  - Exclude Tkinter from main RPM.  If it is in a separate RPM, it is
    easier to track Tk releases.


author: Jeremy Hylton <jeremy@beopen.com>
changelog:
  - updated for 2.0c1
  - build audioop, imageop, and rgbimg extension modules
  - include xml.parsers subpackage
  - add test.xml.out to files list


author: Matt Wilson <msw@redhat.com>
changelog:
  - modify all files to use "python2.0" as the intrepter
  - don't build the Expat bindings
  - build against db1


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - fix the "requires" clause, it lacked a space causing problems
  - use %{_tmppath}
  - don't define name, version etc
  - add the available patches from the Python home page


author: Trond Eivind Glomsrød <teg@redhat.com> 2.2-0.4a4
changelog:
  - 2.2a4
  - Enable UCS4 support
  - Enable IPv6
  - Provide distutils
  - Include msgfmt.py and pygettext.py


author: Matt Wilson <msw@redhat.com> 2.2-0.9b2
changelog:
  - changed DESTDIR to point to / so that distutils will install dynload
    modules properly in the installroot


author: Trond Eivind Glomsrød <teg@redhat.com> 2.2-0.11c1
changelog:
  - 2.2 RC 1
  - Don't include the _tkinter module in the main package - it's 
    already in the tkiter packace
  - Turn off the mpzmodule, something broke in the buildroot


author: Nalin Dahyabhai <nalin@redhat.com> 2.2-5
changelog:
  - disable ndbm support, which is db2 in disguise (really interesting things
    can happen when you mix db2 and db4 in a single application)


author: Trond Eivind Glomsrød <teg@redhat.com> 2.2-8
changelog:
  - Make files in /usr/bin install side by side with python 1.5 when
  - Drop explicit requirement of db4
    built as python2


author: Trond Eivind Glomsrød <teg@redhat.com> 2.2-16
changelog:
  - the same, but in builddirs - this will remove them from the 
    docs package, which doesn't look in the buildroot for files.


author: Mihai Ibanescu <misa@redhat.com>
changelog:
  - builds as python2 require a different libdb
  - changed the buildroot name of python to match python2 builds


author: Mihai Ibanescu <misa@redhat.com>
changelog:
  2.2.2-2
  - Fix #76912 (python-tools contains idle, which uses tkinter, but there is no
    requirement of tkinter from python-tools).
  - Fix #74013 (rpm is missing the /usr/lib/python2.2/test directory)


author: Mihai Ibanescu <misa@redhat.com>
changelog:
  2.2.2-3.*
  - Merged patch from Karsten Hopp <karsten@redhat.de> from 2.2.1-17hammer to
    use %{_libdir}
  - Added XFree86-libs as BuildRequires (because of tkinter)
  - Fixed duplicate listing of plat-linux2
  - Fixed exclusion of lib-dynload/japanese
  - Added lib64 patch for the japanese codecs
  - Use setup magic instead of using tar directly on JapaneseCodecs


author: Mihai Ibanescu <misa@redhat.com>
changelog:
  2.2.2-5
  - Fixed configuration patch to add -lcrypt when compiling cryptmodule.c

  2.2.2-4
  - Spec file change from Matt Wilson <msw@redhat.com> to disable linking 
    with the C++ compiler.


author: Mihai Ibanescu <misa@redhat.com>
changelog:
  2.2.2-3.7.3
  - Recompiled for 7.3 (to fix the -lcrypt bug)
  - Fix for the spurious error message at the end of the build (build-requires
    gets confused by executable files starting with """"): make the tests
    non-executable.


author: Mihai Ibanescu <misa@redhat.com> 2.2.2-7
changelog:
  - Fix bug #79647 (Rebuild of SRPM fails if python isn't installed)
  - Added a bunch of missing BuildRequires found while fixing the
    above-mentioned bug


author: Jeremy Katz <katzj@redhat.com> 2.2.2-8
changelog:
  - urllib2 didn't support non-anonymous ftp.  add support based on how 
    urllib did it (#80676, #78168)


author: Mihai Ibanescu <misa@redhat.com> 2.2.2-11.7.3
changelog:
  - Fixed bug #82544: Errata removes most tools
  - Fixed bug #82435: Python 2.2.2 errata breaks redhat-config-users
  - Removed .lib64 and - files that get installed after we fix the multilib
    .py files.


author: Mihai Ibanescu <misa@redhat.com> 2.2.2-13
changelog:
  - Attempt to look both in /usr/lib64 and /usr/lib/python2.2/site-packages/:
    some work on python-2.2.2-lib64.patch


author: Mihai Ibanescu <misa@redhat.com> 2.2.2-22
changelog:
  - Using newer Japanese codecs (1.4.9). Thanks to 
    Peter Bowen <pzb@datastacks.com> for pointing this out.


author: Jeremy Katz <katzj@redhat.com> 2.2.2-23
changelog:
  - ftp uri's should be able to specify being rooted at the root instead of 
    where you login via ftp (#84692)


author: Mihai Ibanescu <misa@redhat.com> 2.2.2-25
changelog:
  - Fixed bug #84886: pydoc dies when run w/o arguments
  - Fixed bug #84205: add python shm module back (used to be shipped with 1.5.2)
  - Fixed bug #84966: path in byte-compiled code still wrong


author: Mihai Ibanescu <misa@redhat.com> 2.3-0.2
changelog:
  - Building python 2.3
  - Added more BuildRequires
  - Updated the startup files for modulator and pynche; idle installs its own
    now.


author: Mihai Ibanescu <misa@redhat.com> 2.3.3-4
changelog:
  - Fix for bug #122304 : splitting the domain name fails on 64-bit arches
  - Fix for bug #120879 : including Makefile into the main package

  - Requires XFree86-devel instead of -libs (see bug #118442)


author: Mihai Ibanescu <misa@redhat.com> 2.3.3-6
changelog:
  - Correct fix for #122304 from upstream:
    http://sourceforge.net/tracker/?func=detail&atid=105470&aid=931848&group_id=5470


author: Mihai Ibanescu <misa@redhat.com> 2.3.4-1
changelog:
  - Updated to 2.3.4-1 with Robert Scheck's help (bug #124764)
  - Added BuildRequires: tix-devel (bug #124918)


author: Mihai Ibanescu <misa@redhat.com> 2.3.4-3
changelog:
  - Added an optik.py that provides the same interface from optparse for
    backward compatibility; obsoleting python-optik


author: Mihai Ibanescu <misa@redhat.com> 2.3.4-6
changelog:
  - Fixed #128030 (help() not printing anything)
  - Fixed #125472 (distutils.sysconfig.get_python_lib() not returning the right
    path on 64-bit systems)
  - Fixed #127357 (building python as a shared library)
  - Fixed  #19347 (including the contents of Tools/scripts/ in python-tools)


author: Mihai Ibanescu <misa@redhat.com> 2.3.4-7
changelog:
  - Including html documentation for non-i386 arches
  - Fixed #125362 (python-doc html files have japanese character encoding)
  - Fixed #128923 (missing dependency between python and python-devel)


author: Mihai Ibanescu <misa@redhat.com> 2.3.4-8
changelog:
  - Fixed bug #129769: Makefile in new python conflicts with older version found
    in old python-devel
  - Reorganized the spec file to get rid of the aspython2 define; __python_ver
    is more powerful.


author: Mihai Ibanescu <misa@redhat.com> 2.3.4-10
changelog:
  - Fixed bug #77418 (Demo dir not packaged)
  - More tweaking on #19347 (Moved Tools/ under /usr/lib/python2.3/Tools)


author: Jeff Johnson <jbj@jbj.org> 2.4-2
changelog:
  - db-4.3.21 returns DB_BUFFER_SMALL rather than ENOMEM (#141994).
  - add Provide: python(abi) = 2.4
  - include msgfmt/pygettext *.pyc and *.pyo from brp-python-bytecompile.


author: Mihai Ibanescu <misa@redhat.com> 2.4-6
changelog:
  - building the docs from a different source rpm, to decouple bootstrapping
    python from having tetex installed


author: Mihai Ibanescu <misa@redhat.com> 2.4.1-2
changelog:
  - Fixed bug #143667 (python should own /usr/lib/python* on 64-bit systems, for
    noarch packages)
  - Fixed bug #143419 (BuildRequires db4 is not versioned)


author: Mihai Ibanescu <misa@redhat.com> 2.4.1-7
changelog:
  - Fixed bug #169046 (realpath is unsafe); thanks to 
    Peter Jones <pjones@redhat.com> and Arjan van de Ven <arjanv@redhat.com> for
    diagnosing and the patch.


author: Mihai Ibanescu <misa@redhat.com> 2.4.1-10
changelog:
  - Fixed bug #169159 (don't let python core dump if no arguments are passed in)
    Reworked the patch from -8 a bit more.


author: Peter Jones <pjones@redhat.com> 2.4.1-12
changelog:
  - Fixed bug #169159 (check for argc>0 and argv[0] == NULL, not just
      argv[0][0]='\0')
    Reworked the patch from -8 a bit more.


author: Mihai Ibanescu <misa@redhat.com> - 2.4.3-6
changelog:
  - Fixed bug #192592 (too aggressive assertion fails) - SF#1257960
  - Fixed bug #167468 (Doc/tools not included) - added in the python-tools package


author: Mihai Ibanescu <misa@redhat.com> - 2.4.99.c1
changelog:
  - Updated to 2.5c1. Merged fixes from FC6 too:
  - Fixed bug #199373 (on some platforms CFLAGS is needed when linking)
  - Fixed bug #198971 (case conversion not locale safe in logging library)
  - Verified bug #201434 (distutils.sysconfig is confused by the change to make
    python-devel multilib friendly) is fixed upstream


author: Jeremy Katz <katzj@redhat.com>
changelog:
  - fix _md5 and _sha modules (Robert Sheck)
  - no longer provide optik compat; it's been a couple of years now
  - no longer provide the old shm module; if this is still needed, let's 
    build it separately
  - no longer provide japanese codecs; should be a separate package


author: Jeremy Katz <katzj@redhat.com>
changelog:
  - support db 4.5
  - obsolete python-elementtree; since it requires some code tweaks, don't 
    provide it
  - obsolete old python-sqlite; provide the version that's actually included


author: Jeremy Katz <katzj@redhat.com> - 2.5.3-3
changelog:
  - fix atexit traceback with failed syslog logger (#218214)
  - split libpython into python-libs subpackage for multilib apps 
    embedding python interpreters


author: Jeremy Katz <katzj@redhat.com> - 2.5.3-8
changelog:
  - fix extensions to use shared libpython (#219564)
  - all 64bit platforms need the regex fix (#122304)


author: Jeremy Katz <katzj@redhat.com> - 2.5.1-4
changelog:
  - fix _elementtree.so build (#245703)
  - ensure that extension modules we expect are actually built rather than 
    having them silently fall out of the package


author: James Antill <jantill@redhat.com> - 2.5.1-13
changelog:
  - Add tix buildprereq
  - Add tkinter patch
  - Resolves: #281751
  - Fix ctypes loading of libraries, add requires on binutils
  - Resolves: #307221
  - Possible fix for CVE-2007-4965 possible exploitable integer overflow
  - Resolves: #295971


author: James Antill <jantill@redhat.com> - 2.5.1-15
changelog:
  - Do codec lowercase in C Locale.
  - Resolves: 207134 191096
  - Fix stupid namespacing in pysqlite, minimal upgrade to 2.3.3 pysqlite
  - Resolves: 263221


author: James Antill <jantill@redhat.com> - 2.5.1-16
changelog:
  - Fix pyconfig.h comment typo.
  - Add back test_support.py and the __init__.py file.
  - Resolves: rhbz#387401


author: James Antill <jantill@redhat.com> - 2.5.1-18
changelog:
  - Create a python-test sub-module, over 3MB of stuff noone wants.
  - Don't remove egginfo files, try this see what happens ... may revert.
  - Resolves: rhbz#414711


author: James Antill <jantill@redhat.com> - 2.5.1-20
changelog:
  - Add valgrind support files, as doc, to python-devel
  - Relates: rhbz#418621
  - Add new API from 2.6, set_wakeup_fd ... use at own risk, presumably won't
  - change but I have no control to guarantee that.
  - Resolves: rhbz#427794
  - Add gdbinit support file, as doc, to python-devel


author: David Malcolm <dmalcolm@redhat.com> - 2.6.2-3
changelog:
  - replace usage of %define with %global
  - introduce macros for 3 directories, replacing expanded references throughout:
  %{pylibdir}, %{dynload_dir}, %{site_packages}
  - split up the "configure" invocation flags onto individual lines
  - move lib2to3 from -tools subpackage to main package (bug 556667)
  - "Makefile" and the config-32/64.h file are needed by distutils/sysconfig.py
  _init_posix(), so we include them in the core package, along with their parent
  directories (bug 531901)
  - fixup the build when __python_ver is set (Zach Sadecki; bug 533989); use
  pybasever in the files section
  - automatically disable arena allocator when run under valgrind (upstream
  issue 2422; patch 52)
  - fix Lib/SocketServer.py to avoid trying to use non-existant keyword args
  for os.waitpid (patch 53, rhbz:552404, Adrian Reber)
  - use the %{_isa} macro to ensure that the python-devel dependency on python
  is for the correct multilib arch (#555943)
  - patch Makefile.pre.in to avoid building static library (patch111, bug 556092)
  - delete bundled copies of libffi and zlib to make sure we use the system ones
  - replace references to /usr with %{_prefix}; replace references to
  /usr/include with %{_includedir}
  - change python-2.6.2-config.patch to remove our downstream change to curses
  configuration in Modules/Setup.dist, so that the curses modules are built using
  setup.py with the downstream default (linking against libncursesw.so, rather
  than libncurses.so), rather than within the Makefile; add a test to %install
  to verify the dso files that the curses module is linked against the correct
  DSO (bug 539917; changes _cursesmodule.so -> _curses.so)
  - explicitly list all lib-dynload files, rather than dynamically gathering the
  payload into a temporary text file, so that we can be sure what we are
  shipping; remove now-redundant testing for presence of certain .so files


author: David Malcolm <dmalcolm@redhat.com> - 2.6.2-4
changelog:
  - introduce %{with_valgrind} macro, to only use the valgrind patch on archs
  where valgrind-devel is available


author: David Malcolm <dmalcolm@redhat.com> - 2.6.2-5
changelog:
  - update python-2.6.2-config.patch to remove downstream customization of build
  of pyexpat and elementtree modules
  - add patch adapted from upstream (patch 3) to add support for building against
  system expat; add --with-system-expat to "configure" invocation (patch 3)
  - remove embedded copy of expat from source tree during "prep"


author: David Malcolm <dmalcolm@redhat.com> - 2.6.2-6
changelog:
  - add gdb hooks for easier debugging (rhbz:569696)
  - supply fourth parameter (default permissions) in all usage of "defattr" in
  subpackage manifests
  - remove trailing periods from package "Summary" fields
  - fix typo in the description of the "test" subpackage


author: David Malcolm <dmalcolm@redhat.com> - 2.6.2-8
changelog:
  - ensure that the compiler is invoked with "-fwrapv" (rhbz#594819)
  - CVE-2010-1634: fix various integer overflow checks in the audioop
  module (patch 113)
  - CVE-2010-2089: further checks within the audioop module (patch 114)
  - CVE-2008-5983: the new PySys_SetArgvEx entry point from r81399 (patch 115)


author: David Malcolm <dmalcolm@redhat.com> - 2.6.2-9
changelog:
  - cherrypick upstream fix for fatal error creating threads when memory is
  low (patch 116)
  Resolves: rhbz#598564


author: David Malcolm <dmalcolm@redhat.com> - 2.6.2-10
changelog:
  - Fix an incompatibility between pyexpat and the system expat-2.0.1 that led to
  a segfault running test_pyexpat.py (patch 117)
  Resolves: rhbz#583931


author: David Malcolm <dmalcolm@redhat.com> - 2.6.2-11
changelog:
  - Stop python bailing out with an assertion failure when UnicodeDecodeErrors
  occur on very large buffers (patch 118, upstream issue 9058)
  Resolves: rhbz#540518


author: David Malcolm <dmalcolm@redhat.com> - 2.6.5-1
changelog:
  - 2.6.5
  - remove upstream patch 53
  - fixup selinux patch to apply cleanly against 2.6.5 (patch 110)
  Resolves: rhbz#611607
  - remove commented-out, out-of-date patches


author: David Malcolm <dmalcolm@redhat.com> - 2.6.5-2
changelog:
  - support OpenSSL FIPS mode in _hashlib and hashlib
  Resolves: rhbz#563986
  - don't build the _md5 and _sha* modules: rely on _hashlib in hashlib


author: David Malcolm <dmalcolm@redhat.com> - 2.6.6-1
changelog:
  - rebase to 2.6.6: (which contains the big whitespace cleanup of r81031)
    http://www.python.org/download/releases/2.6.6/
    - fixup patch 102, patch 11, patch 52, patch 110
    - drop upstreamed patches: patch 113 (CVE-2010-1634), patch 114
    (CVE-2010-2089), patch 115 (CVE-2008-5983), patch 116 (rhbz598564),
    patch 118 (rhbz540518)
    - add fix for upstream bug in test_posix.py introduced in 2.6.6 (patch 120)
  Resolves: rhbz#627301


author: David Malcolm <dmalcolm@redhat.com> - 2.6.6-2
changelog:
  - fix dbm.release on ppc64/s390x
  Resolves: rhbz#626756
  - fix missing lib2to3 test files
  Resolves: rhbz#625395
  - fix test.test_commands SELinux incompatibility
  Resolves: rhbz#625393
  - make "pydoc -k" more robust in the face of broken modules
  Resolves: rhbz#603073


author: David Malcolm <dmalcolm@redhat.com> - 2.6.6-3
changelog:
  - use an ephemeral port for IDLE, enabling multiple instances to be run
  Resolves: rhbz#639222
  - add systemtap static markers, tapsets, and example scripts
  Resolves: rhbz#569695


author: David Malcolm <dmalcolm@redhat.com> - 2.6.6-4
changelog:
  - backport subprocess fixes to use the "poll" system call, rather than "select"
  Resolves: rhbz#650588


author: David Malcolm <dmalcolm@redhat.com> - 2.6.6-5
changelog:
  - allow the "no_proxy" environment variable to override "ftp_proxy" in
  urllib2 (patch 128)
  Resolves: rhbz#637895
  - make garbage-collection assertion failures more informative (patch 129)
  Resolves: rhbz#614680


author: David Malcolm <dmalcolm@redhat.com> - 2.6.6-6
changelog:
  - prevent _sqlite3.so being built with a redundant RPATH of _libdir (patch 130)
  - remove DOS batch file "idle.bat"
  - remove shebang lines from .py files that aren't executable, and remove
  executability from .py files that don't have a shebang line
  Related: rhbz#634944
  - add "Obsoletes: python-ssl" to core package, as 2.6 contains the ssl module
  Resolves: rhbz#529274


author: David Malcolm <dmalcolm@redhat.com> - 2.6.6-11
changelog:
  - fix incompatibility between 2.6.6 and our non-standard M2Crypto.SSL.SSLTimeoutError
  Resolves: rhbz#681811


author: David Malcolm <dmalcolm@redhat.com> - 2.6.6-21
changelog:
  - backport fix for occasional failures in multiprocessing's Process.start()
  Resolves: rhbz#685234
  - port multiprocessing to use the "poll" syscall, rather than "select"
  Resolves: rhbz#713082
  - backport fix allowing getpass.getpass() to be interrupted with Ctrl-C
  or Ctrl-Z
  Resolves: rhbz#689794
  - backport memory leak fixes for the readline module
  Resolves: rhbz#699740


author: David Malcolm <dmalcolm@redhat.com> - 2.6.6-22
changelog:
  - backport fix for failures seen with subprocess module when supplying stdin
  to short-lived subprocesses
  Resolves: rhbz#667431


author: David Malcolm <dmalcolm@redhat.com> - 2.6.6-23
changelog:
  - update gdb debug hooks, showing when a thread is waiting on the GIL, calls
  to C functions and methods, and garbage collections.  Also, better handle the
  case when "f" is optimized out within PyEval_EvalFrameEx, to at least give
  file and function name, even if the line number and locals won't be available
  Resolves: rhbz#711818


author: David Malcolm <dmalcolm@redhat.com> - 2.6.6-24
changelog:
  - update uid/gid handling to avoid int overflows seen with uid/gid
  values >= 2^31 on 32-bit architectures
  Resolves: rhbz#697470


author: David Malcolm <dmalcolm@redhat.com> - 2.6.6-27
changelog:
  - update "py-bt" in gdb debug hooks to avoiding printing stray <function>
  frames on non-C functions
  Related: rhbz#711818


author: David Malcolm <dmalcolm@redhat.com> - 2.6.6-28
changelog:
  - avoid truncating the compilation flags of extension modules that have CFLAGS
  set in their environment
  Resolves: rhbz#727364


author: David Malcolm <dmalcolm@redhat.com> - 2.6.6-29
changelog:
  - protect GIL detection within gdb debug hooks against C stack frames that
  lack a name (source 1)
  Related: rhbz#711818
  Resolves: rhbz#736085


author: David Malcolm <dmalcolm@redhat.com> - 2.6.6-30
changelog:
  - oCERT-2011-003: add -R command-line option and PYTHONHASHSEED environment
  variable, to provide an opt-in way to protect against denial of service
  attacks due to hash collisions within the dict and set types
  Resolves: CVE-2012-1150


author: David Malcolm <dmalcolm@redhat.com> - 2.6.6-31
changelog:
  - fix endless loop in SimpleXMLRPCServer upon malformed POST request
  Resolves: CVE-2012-0845
  - send encoding in SimpleHTTPServer.list_directory to protect IE7 against
  potential XSS attacks
  Resolves: CVE-2011-4940


author: David Malcolm <dmalcolm@redhat.com> - 2.6.6-34
changelog:
  - add an RPATH to pyexpat.so to avoid ImportError on XML_SetHashSalt when a
  vanilla build of expat is present in LD_LIBRARY_PATH
  Resolves: rhbz#833271


author: David Malcolm <dmalcolm@redhat.com> - 2.6.6-35
changelog:
  - add -DNDEBUG to OPT during the build, disabling C-level assertions
  Resolves: rhbz#810847
  Resolves: rhbz#841748
  - avoid allocating thunks in ctypes unless absolutely necessary, to avoid
  generating SELinux denials on "import ctypes" and "import uuid" when
  embedding Python within httpd
  Resolves: rhbz#814391
  - avoid infinite loop in logging.handlers.SysLogHandler with eventlet when
  the syslog daemon is stopped
  Resolves: rhbz#835460


author: David Malcolm <dmalcolm@redhat.com> - 2.6.6-36
changelog:
  - disable patch 110 (python-2.6.5-ctypes-noexecmem.patch)
  Related: rhbz#707944
  - disable patch 129 (python-2.6.6-gc-assertions.patch) now that we're
  building with -DNDEBUG
  Related: rhbz#810847
  Related: rhbz#841748
  Related: rhbz#614680


author: David Malcolm <dmalcolm@redhat.com> - 2.6.6-38
changelog:
  - move most of the payload of the core package to the libs subpackage, given
  that the libs aren't meaningfully usable without the standard libraries
  - preserve timestamps when fixing shebangs (patch 158) and when installing,
  to minimize .pyc/.pyo differences across architectures (due to the embedded
  mtime in .pyc/.pyo headers)
  - fix multilib issue in /usr/bin/modulator and /usr/bin/pynche
  Related: rhbz#958256


author: Matej Stuchlik <mstuchli@redhat.com> - 2.6.6-39
changelog:
  - Remove BOM insertion code from SysLogHandler that causes messages to be
  treated as EMERG level
  Resolves: rhbz#845802


author: Matej Stuchlik <mstuchli@redhat.com> - 2.6.6-42
changelog:
  - Add an explicit RPATH to _elementtree.so pointing at the directory
  containing system expat
  Resolves: rhbz#962779


author: Slavek Kabrda <bkabrda@redhat.com> - 2.6.6-54
changelog:
  - Fix subprocess.Popen.communicate() being broken by SIGCHLD handler.
  Resolves: rhbz#1065537
  - Rebuild against latest valgrind-devel.
  Resolves: rhbz#1142170


author: Robert Kuska <rkuska@redhat.com> - 2.6.6-59
changelog:
  - Let ConfigParse handle options without values
  - Add check phase to specfile, fix and skip relevant failing tests
  Resolves: rhbz#1031709


author: Matej Stuchlik <mstuchli@redhat.com> - 2.6.6-63
changelog:
  - Since -libs now provide python-ordered dict, added ordereddict
    dist-info to site-packages
  Resolves: rhbz#1199997


author: Tomas Orsava <torsava@redhat.com> - 2.6.6-65
changelog:
  - Fix for CVE-2016-0772 python: smtplib StartTLS stripping attack (rhbz#1303647)
    Raise an error when STARTTLS fails (upstream patch)
  - Fix for CVE-2016-5699 python: http protocol steam injection attack (rhbz#1303699)
    Disabled HTTP header injections in httplib (upstream patch)
  Resolves: rhbz#1346354


author: Matthias Saou <http://freshrpms.net/> 0.2.1-2
changelog:
  - Rename coherence -> Coherence to match upstream and our naming guidelines.
  - Obsolete coherence < 0.2.1-2 but don't provide it since elisa's requirement
    has been updated to match the name change and nothing else requires it.


author: Matthias Saou <http://freshrpms.net/> 0.5.8-1
changelog:
  - Update to 0.5.8.
  - Don't include new "misc" directory, as its location is ugly!
  - Don't include applet-coherence as it probably requires the "misc" directory.
  - Remove all reqs but python-configobj, as it seems to be the only one left.


author: Matthias Saou <http://freshrpms.net/> 0.6.2-2
changelog:
  - Re-add re-needed re-python-twisted re-quirements (#485093).
  - Require dbus for proper parent directory ownership.


author: Luke Macken <lmacken@redhat.com> - 1.3.1-2
changelog:
  - Add a patch to remove Beaker's use of hashlib on Python2.4,
    due to incompatiblities with Python's hmac module (#503772)


author: Kyle VanderBeek <kylev@kylev.com> - 1.3.1-5
changelog:
  - Add patch based on upstream hg 403ef7c82d32 for config overwriting that
    breaks Pylons unit tests


author: Garrett Holmstrom <gholms@fedoraproject.org> - 2.13.3-1
changelog:
  - Updated to 2.13.3
  - Note that this version changes register_image's virtualization_type parameter
  - Fixed auto-scaling PropagateAtLaunch parsing (#1011682)


author: Garrett Holmstrom <gholms@fedoraproject.org> - 2.32.1-1
changelog:
  - Updated to 2.32.1 (RH #1126056, RH #1132348)
  - Added python3-boto (RH #1024363)
  - Added (but did not enable) unit tests (RH #1072946, RH #1072923)


author: Garrett Holmstrom <gholms@fedoraproject.org> - 2.34.0-1
changelog:
  - Updated to 2.34.0 (RH #1072925, RH #1072928, RH #1161229)
  - Made executables point to python2 (RH #1152444)
  - Enabled unit tests on Fedora (RH #1072946)


author: Garrett Holmstrom <gholms@fedoraproject.org> - 2.34.0-2
changelog:
  - Added missing python-requests and python-rsa dependencies
  - Disabled unit tests due to rawhide/F21 python regression (RH #1161166:c4)


author: Charalampos Stratakis <cstratak@redhat.com> - 1:2.34.0-5
changelog:
  - Import to RHEL 6.9
  - Use the epoch tag so the EPEL 6 package can be replaced
  Resolves: rhbz#1423029


author: Toshio Kuratomi <toshio@fedoraproject.org> - 2.0.1-4
changelog:
  - Fix cheetah enough that it will pass its unittests on python-2.6.  This has
    actually been broken since py-2.5 and this fix is only a workaround.


author: David Malcolm <dmalcolm@redhat.com> - 4.6.0-3
changelog:
  - fix source URL
  - use %global rather than %define
  - avoid intermediate "docs" directory in path of documentation


author: Andy Grover <agrover@redhat.com> - 1.99.1.git987b63b-3
changelog:
  - Address comments from spec review
    - drop examples/myshell from doc, it hasn't been updated for API change
    - Fully document procedure to generate source .tar.gz
    - Remove "." from summary
    - Remove commented-out spec todos and other cruft


author: Andy Grover <agrover@redhat.com> - 1:1.1-2
changelog:
  - Properly update changelog
  - Sync version with upstream, Epoch used
  - Change Source URL to intermediate github repo


author: Andy Grover <agrover@redhat.com> - 1:1.1.fb1-1
changelog:
  - New upstream source and release
  - Remove patches:
    * python-configshell-remove-epydoc-dep.patch
    * python-configshell-git-version.patch


author: David Malcolm <dmalcolm@redhat.com> - 3.0.1-2
changelog:
  - require python-setuptools at run-time (556290)
  - don't add tracer.so to the provides
  - fix License metadata
  - remove executable permissions from many files that don't need it


author: Panu Matilainen <pmatilai@welho.com> 0.3.2-0.fdr.2.a6
changelog:
  - generate .pyo files during install
  - require exact version of python used to build the package
  - include more docs + demos
  - fix dependency on /usr/local/bin/python
  - use fedora.us style buildroot
  - buildrequires gmp-devel
  - use description from README


author: Thorsten Leemhuis <fedora at leemhuis dot info> - 0:2.0.1-1
changelog:
  - Update to 2.0.1
  - Use Dist
  - Drop python-crypto-64bit-unclean.patch, similar patch was applied 
    upstream


author: Thorsten Leemhuis <fedora[AT]leemhuis.info> - 2.0.1-6
changelog:
  - Remove dist
  - rebuild, because the older version was much bigger, as it was build when
    distutils was doing static links of libpython


author: Martin Sivak <msivak at redhat dot com> - 0.0.8-1
changelog:
  - Fix the params for add and remove key routines
  - Workaround one SIGSEGV in cryptsetup and change the order of passwords in luksRemoveKey


author: David Malcolm <dmalcolm@redhat.com> - 1.4.1-6
changelog:
  - remove embedded copy of timezone data, and redirect the dateutil.zoneinfo
  API accordingly
  Resolves: rhbz#559309
  - add a %check, running the upstream selftest suite


author: Luke Macken <lmacken@redhat.com> - 3.0.1-2
changelog:
  - Only run the test suite on Fedora 11, which has Py2.6 and the multiprocessing
    module.  We can disable this once the compat module is packaged for F10 and
    below.


author: Toshio Kuratomi <a.badger@gmail.com> - 1.5-2
changelog:
  - Verify that .pth files are correct.
  - Update license tag for new guidelines.
  - Update setuptools BR for changes in rawhide.


author: David Sommerseth <davids@redhat.com> - 3.10.7-3
changelog:
  - Fixed even more .spec file issues and removed explicit mentioning
    of /usr/share/python-dmidecode/pymap.xml


author: Nima Talebi <nima@it.net.au> - 3.10.8-1
changelog:
  - New Upstream release.
  - Big-endian and little-endian approved.
  - Packaged unit-test to tarball.
  - Rewritten unit-test to be able to run as non-root user, where it will not
    try to read /dev/mem.
  - Added two dmidump data files to the unit-test.


author: Roman Rakus <rrakus@redhat.com> - 3.10.13-1
changelog:
  - Update to 3.10.13 release
    Resolves: #621567, #627901, #667363
  - Signal handler for SIGILL
    Resolves #646429


author: David Malcolm <dmalcolm@redhat.com> - 2.6.2-3
changelog:
  - add LICENSE file to payload
  - fix %description
  - don't ship .buildinfo file
  - change %define to %global
  - eliminate pybasever
  - delete unused patch (patch 4)


author: Toshio Kuratomi <toshio.tiki-lounge.com> 0:0.3.5-0.fdr.1
changelog:
  - Update to 0.3.5.
  - Update spec style to latest fedora-rpmdevtools.
  - Merge everything into a single package.  There isn't very much space
    advantage to having separate packages in a package this small and in
    this case, the documentation on using docutils as a library is also a
    good example of how to write in ReSructuredText.


author: Toshio Kuratomi <toshio.tiki-lounge.com> 0:0.3.7-0.fdr.1
changelog:
  - Update to 0.3.7
  - Rename from python-docutils to docutils.
  - Make roman.py optionally a part of the files list.  In FC2, this will be
    included.  In FC3, this won't.
  - BuildConflict with self since the docutils build detects the presence
    of roman.py and doesn't reinstall itself.


author: Toshio Kuratomi <toshio.tiki-lounge.com> 0:0.3.7-0.fdr.2
changelog:
  - Special case roman.py to always install.  This is the behaviour we want
    unless something else provides it.  Will need to watch out for this in
    future Core and Extras packages, but the auto detection code makes it
    possible that builds will not be reproducible if roman.py were installed
    from another package.... Lesser of two evils here.
  - Provide python-docutils in case that package were preinstalled from
    another repository.


author: Toshio Kuratomi <toshio.tiki-lounge.com> 0:0.3.7-0.fdr.3
changelog:
  - Really install roman.py and build roman.py[co].  Needed to make sure I have
    docutils installed to test that it builds roman.py fine in that case.


author: Toshio Kuratomi <toshio-tiki-lounge.com> 0.3.9-1
changelog:
  - Update to version 0.3.9.
  - Use a dist tag as there aren't any differences between supported fc
    releases (FC3, FC4, devel.)


author: Toshio Kuratomi <toshio-tiki-lounge.com> 0.4-1
changelog:
  - Update to 0.4.
  - Scripted the listing of files in the python module.
  - Add a missingok requirement on python-imaging as docutils can make use of
    it when converting to formats that have images.


author: Toshio Kuratomi <toshio-tiki-lounge.com> 0.4-3
changelog:
  - Bump for FC6 rebuild.
  - Remove python byte compilation as this is handled automatically in FC4+.
  - No longer %ghost .pyo files.


author: Roozbeh Pournader <roozbeh@farsiweb.info> - 1.1.3-2
changelog:
  - Remove %{enchant_dir} macro
  - Add %dir for architecture-specific directory
  - Add "Provides:" for PyEnchant
  - Remove "Requires:" on enchant (Brian Pepple)


author: Arnaldo Carvalho de Melo <acme@redhat.com> - 0.3-1
changelog:
  - Add get_flags method from the first python-ethtool contributor, yay
  - Add pifconfig command, that mimics the ifconfig tool using the
    bindings available


author: Jeff Garzik <jgarzik@redhat.com> - 0.3-5.2
changelog:
  - Import man page patch from Fedora BZ# 638475
  - Fix description spelling errors found by rpmlint.
  - Fixes BZ# 605535


author: David Malcolm <dmalcolm@redhat.com> - 0.6-1
changelog:
  - cherrypick fixes for Py_None reference leak, and for some error-handling bugs
  Resolves: rhbz#680269


author: David Malcolm <dmalcolm@redhat.com> - 0.6-2
changelog:
  - fix typo in pethtool --help
  Resolves: rhbz#692028
  - fix memory leaks
  Resolves: rhbz#698125
  - add IPv6 information to pifconfig
  Resolves: rhbz#698192
  - respect interface arguments to pifconfig
  Resolves: rhbz#714753
  - add a get_ipv4_addresses() method to ethtool.etherinfo to support devices
  with multiple IPv4 addresses
  Resolves: rhbz#759150


author: David Malcolm <dmalcolm@redhat.com> - 0.6-3
changelog:
  - update python-ethtool-0.6-add-get_ipv4_addresses-method.patch, addressing
  bug 886644, memory leaks, and a crasher when the broadcast address is NULL
  Resolves: rhbz#886644


author: Bohuslav Kabrda <bkabrda@redhat.com> - 0.6-4
changelog:
  - make get_active_devices() return IPv6-only devices, too
  Resolves: rhbz#855920
  - make pifconfig output all IPv4 addresses for all devices
  Resolves: rhbz#876211


author: Oliver Andrich <oliver.andrich@gmail.com> 0.2.2-2
changelog:
  - fixed the too long description line
  - add -O1 to the installation process
  - %ghost'ed the *.pyo files


author: Toshio Kuratomi <toshio@fedoraproject.org> 1.0.1-1
changelog:
  - Update to 1.0.1
  - Fixes issue where chained_validators were silently ignored.  (bz#454988)
    Both of our patches are fixed upstream now.


author: Christopher Stone <chris.stone@gmail.com> 0.7.2-1
changelog:
  - Initial Release of python-fpconst, changes from fpconst include:
  - Renamed package from fpconst to python-fpconst
  - Removed macros in URL
  - Removed python-devel from BR
  - Droped the second paragraph in %description
  - Droped PKG-INFO from %doc
  - Added pep-0754.txt to %doc


author: Jeffrey C. Ollie <jeff@ocjtech.us> - 0.5.1-1
changelog:
  - Version 0.5.1
  - http://svn.edgewall.org/repos/genshi/tags/0.5.1/
  - (Jul 9 2008, from branches/stable/0.5.x)
  - 
  -  * Fix problem with nested match templates not being applied when buffering
  -    on the outer `py:match` is disabled. Thanks to Erik Bray for reporting the
  -    problem and providing a test case!
  -  * Fix problem in `Translator` filter that would cause the translation of
  -    text nodes to fail if the translation function returned an object that was
  -    not directly a string, but rather something like an instance of the
  -    `LazyProxy` class in Babel (ticket #145).
  -  * Fix problem with match templates incorrectly being applied multiple times.
  -  * Includes from templates loaded via an absolute path now include the correct
  -    file in nested directories as long if no search path has been configured
  -    (ticket #240).
  -  * Unbuffered match templates could result in parts of the matched content
  -    being included in the output if the match template didn't actually consume
  -    it via one or more calls to the `select()` function (ticket #243).


author: Juha Ylitalo <jylitalo@iki.fi> - 1.1.3-1
changelog:
  - updated to 1.1.3
  - switched from python 1.5.2 to python 2.2
  - other modifications to make it build at minimal effort


author: Juha Ylitalo <jylitalo@iki.fi> - 0:1.1.3-0.fdr.3
changelog:
  - changed buildroot macro back to $RP_BUILD_ROOT
  - ./configure to configure macro
  - Group to Development/Languages
  - Added Epoch values to versioned Requires and BuildRequires
  - added README and CHANGES-113 into doc


author: Juha Ylitalo <jylitalo@iki.fi> - 0:1.1.3-0.fdr.5
changelog:
  - added python2-devel into buildrequires.
  - added versionm variable into setup macro instead of hard coded
    version number.


author: Juha Ylitalo <jylitalo@iki.fi> - 0:1.1.4-0.fdr.2
changelog:
  - added XFree86-devel and tkinter into buildrequires.
  - removed version info from buildrequires
  - removed unnecessary stuff from requires.


author: Juha Ylitalo <jylitalo@iki.fi> - 0:1.1.4-0.fdr.3
changelog:
  - fixed source0 to point into effbot.org instead of pythonware.com
  - changed references from python2 to python, since python in RH9 is
    python 2.2.
  - removed percent signs from changelog.


author: Juha Ylitalo <jylitalo@iki.fi> - 0:1.1.4-0.fdr.4
changelog:
  - bumped release
  - implemented changes from Ville, which basically means that:
  - setup macro now users "-q" option
  - libpng dropped from buildrequirements
  - run test suite after build


author: Juha Ylitalo <jylitalo@iki.fi> - 0:1.1.4-0.fdr.5
changelog:
  - added -devel package (thanks to patch from pmatilai@welho.com)
  - FC1 requires dependency to tcl-devel and tk-devel package


author: Ville Skyttä <ville.skytta at iki.fi> - 0:1.1.4-6
changelog:
  - Borrow parts from patch in Debian's 1.1.4-3 to fix issues in bug 1038 as
    well as a bunch of others.
  - Bring up to date with current fedora.us Python spec template recommendations.
  - Fix -devel directory permissions.


author: Nils Philippsen <nphilipp@redhat.com> - 1.1.6-3
changelog:
  - add sane subpackage, split off tk subpackage (#238252)
  - add sane-types patch
  - use -b for patches to save original files
  - correct groups


author: José Matos <jamatos[AT]fc.up.pt> - 1.1.6-5
changelog:
  - Rebuild for Tcl/Tk upgrade (F9+).
  - Update description to reflect the subpackages.
  - Fix files permission.


author: Karsten Hopp <karsten@redhat.com> 1.1.6-15
changelog:
  - disable sane subpackage and sane requirements for mainframes, we don't have
    sane on s390 and s390x


author: Joel Granados <jgranado@redhat.com> - 1.1.6-17
changelog:
  - Fix the shebang issue.  See https://fedoraproject.org/wiki/Features/SystemPythonExecutablesUseSystemPython


author: Tim Lauridsen <timlau@fedoraproject.org> - 0.2.1-4
changelog:
  - Added some logic to get the right python-setuptools buildrequeres
  - based on the fedora version, to make the same spec file useful in
  - all fedora releases.


author: Tim Lauridsen <timlau@fedoraproject.org> - 0.2.2-1
changelog:
  - Updated to release 0.2.2
  - removed patch to to fix problems with out commented lines, included in upstream source


author: Tim Lauridsen <timlau@fedoraproject.org> - 0.2.4-1
changelog:
  - Release 0.2.4:
  -   Updated to work with Python-2.6 (Python-2.4 and 2.5 are still supported)
  -   Support for files opened in unicode mode
  -   Fixed Python-3.0 compatibility warnings
  -   Minor API cleanup


author: Tim Lauridsen <timlau@fedoraproject.org> - 0.3.0-1
changelog:
  - Release 0.3.0
  -  Fix handling of continuation lines
  -  Fix DEFAULT handling
  -  Fix picking/unpickling


author: Thomas Moschny <thomas.moschny@gmx.de> - 2.1-1
changelog:
  - Update to 2.1, which fixes a number of bugs.
    See http://jinja.pocoo.org/2/documentation/changelog#version-2-1.


author: Thomas Moschny <thomas.moschny@gmx.de> - 2.2.1-1
changelog:
  - Update to 2.2.1, mainly a bugfix release.
  - Remove patch no longer needed.
  - Remove conditional for FC-8.
  - Compilation of speedup module has to be explicitly requested now.


author: Miro Hrončok <mhroncok@redhat.com> - 2.2.1-3
changelog:
  - Require python-setuptools, otherwise jinja2.__version__ evaluates to "unknown"
  Resolves: rhbz#1121241


author: Charalampos Stratakis <cstratak@redhat.com> - 1.0-4
changelog:
  - Import to RHEL 6.9
  - Increment the release so it will replace the respective EPEL build
  Resolves: rhbz#1422977


author: Rob Crittenden <rcritten@redhat.com> - 0.1735-2
changelog:
  - Include GSS_C_DELEG_FLAG in gss_init_sec_context() so the command-line
    tools can do kerberos ticket forwarding.


author: Rob Crittenden <rcritten@redhat.com> - 1.0-1
changelog:
  - Change name to python-kerberos from PyKerberos
  - Change license from "Apache License" to ASL 2.0 per guidelines
  - Upstream released 1.0 which is equivalent to version 1541. Reverting
    to that.


author: Rob Crittenden <rcritten@redhat.com> - 1.1-7
changelog:
  - Fix calculation of username string length in authenticate_gss_client_wrap
    (#1057333)
  - Fix version in setup.py so egg information is correct (#973379)


author: Konstantin Ryabitsev <icon@linux.duke.edu> 0.6.3-2
changelog:
  - Add docs and list files instead of using INSTALLED_FILES (safer)
  - Trim description a little
  - Require python-abi
  - BuildRequire python-devel
  - Use python_sitelib
  - Remove test directory from site_packages
  - Use ghosting for .pyo


author: Konstantin Ryabitsev <icon@fedoraproject.org> - 0.9-1
changelog:
  - Version 0.9
  - Switch to using setuptools.
  - Handle .egg data.
  - Don't list python-abi namely -- FC4 and above does it automatically.


author: Konstantin Ryabitsev <icon@fedoraproject.org> - 0.9.4-2
changelog:
  - Add hotfix for broken py-def (#220843)
  - Simplify kid and kidc to not require setuptools to run (#220844)


author: Mike Bonnet <mikeb@redhat.com>
changelog:
  - fix typo in error definition
  - change the return value of recvauth() from ac to (ac, princ), where princ is the principal sent by sendauth()
  - rename the package and reorganize the BuildRequires, to be more Extras-friendly


author: Mike Bonnet <mikeb@redhat.com> - 1.0.12-2
changelog:
  - configure.in: parse version number out of spec file
  - add URL tag
  - add LGPL text
  - remove Requires: krb5-libs, let rpm pick up library dependencies
  - bump revision


author: John Dennis <jdennis@redhat.com> - 1.0.90-2
changelog:
  - Resolves: bug 642414
    Update to latest upstream release (includes the following)
    - return the contents of the AP_REP message from rd_rep()
    - improved memory handling
    - removed use of KRB_PRIVATE
    - better docstrings


author: Ville Skyttä <ville.skytta at iki.fi> 0:2.0.0-0.fdr.0.pre16.3
changelog:
  - Stricter python version requirements.
  - BuildRequire openssl-devel.
  - Explicitly build *.pyo, install them as %ghost.
  - Own more installed dirs.
  - Remove $RPM_BUILD_ROOT at start of %install.


author: Matthew Barnes <mbarnes@redhat.com> - 2.2.0-1
changelog:
  - Update to 2.2.0
  - Update python-ldap-2.0.6-rpath.patch and rename it to
    python-ldap-2.2.0-dirs.patch.


author: Arnaldo Carvalho de Melo <acme@redhat.com> - 0.4.2-1
changelog:
  - interrupts: Add find_by_user_regex
  - process: Always set the "cmdline" array, even if empty
  - pidstats: Remove dead processes in find_by_name()
  - pidstats: Add process class to catch dict references for late parsing
  - pidstats: Move the /proc/PID/{stat,status} parsing to classes
  - pidstats: Introduce process_flags method


author: Arnaldo Carvalho de Melo <acme@redhat.com> - 0.4.7-1
changelog:
  - Fix pidstat.process_flag()
  - Introduce pflags utility
  - Parse IRQ affinities for !root
  - Add PF_NO_SETAFFINITY const


author: Arnaldo Carvalho de Melo <acme@redhat.com> - 0.4.9-1
changelog:
  - Adds documentations to classes, more work to do on methods
  - Fixes parsing of users in /proc/interrupts users field
  - Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1245677


author: Jeffrey C. Ollie <jeff@ocjtech.us> - 2.1.2-1
changelog:
  - 2.1.2 (2008-09-05)
  - Features added
  - 
  -    * lxml.etree now tries to find the absolute path name of files when
  -      parsing from a file-like object. This helps custom resolvers when
  -      resolving relative URLs, as lixbml2 can prepend them with the path of
  -      the source document.
  - 
  - Bugs fixed
  - 
  -    * Memory problem when passing documents between threads.
  -    * Target parser did not honour the recover option and raised an exception
  -      instead of calling .close() on the target.


author: Jeffrey C. Ollie <jeff@ocjtech.us> - 2.1.3-1
changelog:
  - 2.1.3 (2008-11-17)
  - Bugs fixed
  - 
  -    * Ref-count leaks when lxml enters a try-except statement while an
  -      outside exception lives in sys.exc_*(). This was due to a problem
  -      in Cython, not lxml itself.
  -    * Parser Unicode decoding errors could get swallowed by other
  -      exceptions.
  -    * Name/import errors in some Python modules.
  -    * Internal DTD subsets that did not specify a system or public ID
  -      were not serialised and did not appear in the docinfo property
  -      of ElementTrees.
  -    * Fix a pre-Py3k warning when parsing from a gzip file in Py2.6.
  -    * Test suite fixes for libxml2 2.7.
  -    * Resolver.resolve_string() did not work for non-ASCII byte strings.
  -    * Resolver.resolve_file() was broken.
  -    * Overriding the parser encoding didn't work for many encodings.


author: Jeffrey C. Ollie <jeff@ocjtech.us> - 2.2-0.1.alpha1
changelog:
  - 2.2alpha1 (2008-11-23)
  - Features added
  - 
  -    * Support for XSLT result tree fragments in XPath/XSLT extension
  -      functions.
  -    * QName objects have new properties namespace and localname.
  -    * New options for exclusive C14N and C14N without comments.
  -    * Instantiating a custom Element classes creates a new Element.
  - 
  - Bugs fixed
  - 
  -    * XSLT didn't inherit the parse options of the input document.
  -    * 0-bytes could slip through the API when used inside of Unicode
  -      strings.
  -    * With lxml.html.clean.autolink, links with balanced parenthesis, that
  -      end in a parenthesis, will be linked in their entirety (typical with
  -      Wikipedia links).


author: Jeffrey C. Ollie <jeff@ocjtech.us> - 2.2-0.4.beta1
changelog:
  - 2.2beta1 (2008-12-12)
  - Features added
  - 
  -    * Allow lxml.html.diff.htmldiff to accept Element objects,
  -      not just HTML strings.
  - 
  - Bugs fixed
  - 
  -    * Crash when using an XPath evaluator in multiple threads.
  -    * Fixed missing whitespace before Link:... in lxml.html.diff.
  - 
  - Other changes
  - 
  -    * Export lxml.html.parse.


author: Jeffrey C. Ollie <jeff@ocjtech.us> - 2.2-0.5.beta2
changelog:
  - 2.2beta2 (2009-01-25)
  - Bugs fixed
  - 
  -    * Potential memory leak on exception handling. This was due to a
  -      problem in Cython, not lxml itself.
  -    * iter_links (and related link-rewriting functions) in lxml.html would
  -      interpret CSS like url("link") incorrectly (treating the quotation
  -      marks as part of the link).
  -    * Failing import on systems that have an io module.


author: Jeffrey C. Ollie <jeff@ocjtech.us> - 2.2-0.6.beta3
changelog:
  - 2.2beta3 (2009-02-17)
  - Features added
  - 
  -    * XSLT.strparam() class method to wrap quoted string parameters that
  -     require escaping.
  - 
  - Bugs fixed
  - 
  -    * Memory leak in XPath evaluators.
  -    * Crash when parsing indented XML in one thread and merging it with
  -      other documents parsed in another thread.
  -    * Setting the base attribute in lxml.objectify from a unicode string
  -      failed.
  -    * Fixes following changes in Python 3.0.1.
  -    * Minor fixes for Python 3.
  - 
  - Other changes
  - 
  -    * The global error log (which is copied into the exception log) is now
  -      local to a thread, which fixes some race conditions.
  -    * More robust error handling on serialisation.


author: Jeffrey C. Ollie <jeff@ocjtech.us> - 2.2-0.8.beta4
changelog:
  - 2.2beta4 (2009-02-27)
  - Features added
  - 
  -    * Support strings and instantiable Element classes as child arguments
  -      to the constructor of custom Element classes.
  -    * GZip compression support for serialisation to files and file-like
  -      objects.
  - 
  - Bugs fixed
  - 
  -    * Deep-copying an ElementTree copied neither its sibling PIs and
  -      comments nor its internal/external DTD subsets.
  -    * Soupparser failed on broken attributes without values.
  -    * Crash in XSLT when overwriting an already defined attribute using
  -      xsl:attribute.
  -    * Crash bug in exception handling code under Python 3. This was due to
  -      a problem in Cython, not lxml itself.
  -    * lxml.html.FormElement._name() failed for non top-level forms.
  -    * TAG special attribute in constructor of custom Element classes was
  -      evaluated incorrectly.
  - 
  - Other changes
  - 
  -    * Official support for Python 3.0.1.
  -    * Element.findtext() now returns an empty string instead of None for
  -      Elements without text content.


author: Jeffrey C. Ollie <jeff@ocjtech.us> - 2.2-1
changelog:
  - 2.2 (2009-03-21)
  - Features added
  - 
  -    * Support for standalone flag in XML declaration through
  -      tree.docinfo.standalone and by passing standalone=True/False on
  -      serialisation.
  - 
  - Bugs fixed
  - 
  -    * Crash when parsing an XML Schema with external imports from a
  -      filename.


author: Jeffrey C. Ollie <jeff@ocjtech.us> - 2.2.1-1
changelog:
  - 2.2.1 (2009-06-02)
  - Features added
  - 
  -    * Injecting default attributes into a document during XML Schema
  -      validation (also at parse time).
  -    * Pass huge_tree parser option to disable parser security restrictions
  -      imposed by libxml2 2.7.
  - 
  - Bugs fixed
  - 
  -    * The script for statically building libxml2 and libxslt didn't work
  -      in Py3.
  -    * XMLSchema() also passes invalid schema documents on to libxml2 for
  -      parsing (which could lead to a crash before release 2.6.24).


author: Jeffrey C. Ollie <jeff@ocjtech.us> - 2.2.2-1
changelog:
  - 2.2.2 (2009-06-21)
  - Features added
  - 
  -    * New helper functions strip_attributes(), strip_elements(),
  -      strip_tags() in lxml.etree to remove attributes/subtrees/tags
  -      from a subtree.
  - 
  - Bugs fixed
  - 
  -    * Namespace cleanup on subtree insertions could result in missing
  -      namespace declarations (and potentially crashes) if the element
  -      defining a namespace was deleted and the namespace was not used
  -      by the top element of the inserted subtree but only in deeper
  -      subtrees.
  -    * Raising an exception from a parser target callback didn't always
  -      terminate the parser.
  -    * Only {true, false, 1, 0} are accepted as the lexical representation
  -      for BoolElement ({True, False, T, F, t, f} not any more), restoring
  -      lxml <= 2.0 behaviour.


author: Jeffrey C. Ollie <jeff@ocjtech.us> - 2.2.3-1
changelog:
  - 2.2.3 (2009-10-30)
  - Bugs fixed
  - 
  -    * The resolve_entities option did not work in the incremental feed
  -      parser.
  -    * Looking up and deleting attributes without a namespace could hit a
  -      namespaced attribute of the same name instead.
  -    * Late errors during calls to SubElement() (e.g. attribute related
  -      ones) could leave a partially initialised element in the tree.
  -    * Modifying trees that contain parsed entity references could result
  -      in an infinite loop.
  -    * ObjectifiedElement.__setattr__ created an empty-string child element
  -      when the attribute value was rejected as a non-unicode/non-ascii
  -      string
  -    * Syntax errors in lxml.cssselect could result in misleading error
  -      messages.
  -    * Invalid syntax in CSS expressions could lead to an infinite loop in
  -      the parser of lxml.cssselect.
  -    * CSS special character escapes were not properly handled in
  -      lxml.cssselect.
  -    * CSS Unicode escapes were not properly decoded in lxml.cssselect.
  -    * Select options in HTML forms that had no explicit value attribute
  -      were not handled correctly. The HTML standard dictates that their
  -      value is defined by their text content. This is now supported by
  -      lxml.html.
  -    * XPath raised a TypeError when finding CDATA sections. This is now
  -      fully supported.
  -    * Calling help(lxml.objectify) didn't work at the prompt.
  -    * The ElementMaker in lxml.objectify no longer defines the default
  -      namespaces when annotation is disabled.
  -    * Feed parser failed to honour the 'recover' option on parse errors.
  -    * Diverting the error logging to Python's logging system was broken.


author: David Malcolm <dmalcolm@redhat.com> - 0.3.4-1
changelog:
  - rebase to 0.3.4; add requirement on python-markupsafe
  Resolves: rhbz#608155
  - add %check section, adding build-time requirements on python-nose and
  python-markupsafe


author: Thomas Moschny <thomas.moschny@gmx.de> - 2.0-1
changelog:
  - Update to 2.0.
  - Adjusted source URL.
  - License changed to BSD only.
  - Upstream now provides a script to run markdown from the cmdline.


author: Thomas Moschny <thomas.moschny@gmx.de> - 2.0.1-3
changelog:
  - Add requirement on python-elementtree, which was a separate package
    before Python 2.5.
  - Re-add changelog entries accidentally removed earlier.


author: Orion Poplawski <orion@cora.nwra.com> 0.82-2
changelog:
  - Rename to python-matplotlib
  - Remove unneeded Requires: python
  - Add private directories to %files


author: Orion Poplawski <orion@cora.nwra.com> 0.82-4
changelog:
  - BuildRequires: pytz, python-dateutil - use upstream
  - Don't use INSTALLED_FILES, list dirs
  - Fix execute permissions


author: Orion Poplawski <orion@cora.nwra.com> 0.87-1
changelog:
  - Update to 0.87
  - Add BR numpy and python-numarray
  - Add patch to keep Numeric as the default numerix package
  - Add BR tkinter and tk-devel for TkInter backend
  - Make separate package for Tk backend


author: Orion Poplawski <orion@cora.nwra.com> 0.87.7-1
changelog:
  - Update to 0.87.7 and fix up the defaults to use numpy
  - Force build of tkagg backend without X server
  - Use src.rpm from Jef Spaleta, closes bug 216578


author: Orion Poplawski <orion@cora.nwra.com> 0.87.7-2
changelog:
  - Force build of gtk/gtkagg backends in mock (bug #218153)
  - Change Requires from python-numeric to numpy (bug #218154)


author: Jef Spaleta <jspaleta[AT]fedoraproject org> - 0.91.2-1
changelog:
  - New upstream version
  - Adding Fedora specific setup.cfg from included template
  - removed numarry and numerics build requirements


author: David Malcolm <dmalcolm@redhat.com> - 0.98.5.2-6
changelog:
  - build an alternate tarball, with agg_conv_gpc.h file removed
  - add %defattr to tk subpackage
  - fix end-of-line encodings of some examples
  Resolves: rhbz#608190


author: Chris Lumens <clumens@redhat.com> - 0.2-1
changelog:
  - Add a title to the main exception dialog so it looks right in anaconda.
  - Don't include an extra '/' in the displayed bug URL (#517515).
  - Now that there's .po files, package them.
  - Use the new exception icon (#517164).


author: Chris Lumens <clumens@redhat.com> - 0.4-1
changelog:
  - Add a default description to bug reports.
  - Handle the user pressing Escape by continuing to show the dialog.
  - Lots more translation updates.


author: Chris Lumens <clumens@redhat.com> - 0.6-1
changelog:
  - Make idSkipList work again.
  - Support dumping objects derived from Python's object.
  - Use the right method to set text on a snack.Entry (#526884).


author: Chris Lumens <clumens@redhat.com> - 0.7-1
changelog:
  - Add a test case framework.
  - Move src -> meh for ease of test case writing.
  - Another attempt at making the attrSkipList work (#532612, #532737).


author: Chris Lumens <clumens@redhat.com> - 0.8-1
changelog:
  - And add a requirement for report as well. (clumens)
  - filer.py is now completely taken over by meh. (clumens)
  - Everything from savers.py has moved into report. (clumens)
  - Remove unused UI code now that report handles all this for me. (clumens)
  - Switch ExceptionHandler to use report (#562656). (clumens)
  - Don't allow an exception when writing out an attribute stop the whole dump. (clumens)
  - Credit where credit is due. (clumens)


author: Chris Lumens <clumens@redhat.com> - 0.9-1
changelog:
  - Remove the requirement on python-bugzilla (#602794). (clumens)
  - Rename ba.po -> bs.po (#583055). (clumens)
  - Translation updates.


author: Chris Lumens <clumens@redhat.com> - 0.11-1
changelog:
  - Update the spec file URL to something valid (#670601). (clumens)
  - Don't use _D for Debug, since that's already used by the expander (#640929). (clumens)
  - Translation updates.


author: Chris Lumens <clumens@redhat.com> 0.11-2
changelog:
  - Change dependency to libreport-* (mtoman)
    Resolves: rhbz#730924
  - Add abrt-like information to bug reports (vpodzime).
    Resolves: rhbz#728871


author: Vratislav Podzimek <vpodzime@redhat.com> 0.12.1-1
changelog:
  - Adapt to new libreport API (vpodzime).
    Resolves: rhbz#769821
  - Add info about environment variables (vpodzime).
    Resolves: rhbz#788577


author: Sean Reifschneider <jafo@tummy.com> 1.36-3
changelog:
  - Changes based on feedback from Ruben Kerkhof:
  - Fixing license.
  - Removing PKG-INFO from doc.
  - Fixing summary.
  - Removing setuptools build dependency.
  - Changing permissions of memcache module to


author: Michał Bentkowski <mr.ecik at gmail.com> - 1.5.1-3
changelog:
  - Remove python-abi dependency.
  - Prep section deletes first two lines in __init__.py file due to rpmlint error.


author: Michał Bentkowski <mr.ecik at gmail.com> - 1.5.1-5
changelog:
  - Some fixes in preamble.
  - Change name from mutagen to python-mutagen.
  - Delete CFLAGS declaration.


author: Toshio Kuratomi - 1.1-11
changelog:
  - Add README file
  - Update old way of invoking setup.py
  - Fix conditionals for python-setuptools
  - Comment what myghty-importer.patch does


author: John Eckersberg <jeckersb@redhat.com> - 0.6.3-2
changelog:
  - Minor tweaks to spec file aligning with latest Fedora packaging guidelines
  - Enforce python 2.4 dependency as needed by netaddr >= 0.6.2
  - Drop BR on python-setuptool as it is not imported in setup.py
  - Drop BR on dos2unix use sed instead
  - Align description with that of delivered PKG-INFO
  - Rip out python shebangs
  - Add %check section to enable tests
  - Thanks to Gareth Armstrong <gareth.armstrong@hp.com>


author: John Eckersberg <jeckersb@redhat.com> - 0.7.1-1
changelog:
  - New upstream release 0.7.1 fixes naming conflict with 'nash' by
    renaming the netaddr shell to 'netaddr'


author: Luke Macken <lmacken@redhat.com> 0.9.2-1
changelog:
  - Add nosetests(1) manpage, and python-nose-0.9.2-mandir.patch to put it in
    the correct location.
  - 0.9.2


author: John Dennis <jdennis@redhat.com> - 0.1-1
changelog:
  - clean up ssl_example.py, fix arg list in get_cert_nicknames,
     make certdir cmd line arg consistent with other NSS tools
  - update httplib.py to support client auth, add httplib_example.py which illustrates it's use
  - fix some documentation
  - fix some type usage which were unsafe on 64-bit


author: John Dennis <jdennis@redhat.com> - 0.2-1
changelog:
  - Convert licensing to MPL tri-license
  - apply patch from bug #472805, (Miloslav Trmač)
    Don't allow closing a socket twice, that causes crashes.
    New function nss.io.Socket.new_socket_pair()
    New function nss.io.Socket.poll()
    New function nss.io.Socket.import_tcp_socket()
    New method nss.nss.Certificate.get_subject_common_name()
    New function nss.nss.generate_random()
    Fix return value creation in SSLSocket.get_security_status
    New function nss.ssl.SSLSocket.import_tcp_socket()


author: John Dennis <jdennis@redhat.com> - 0.3-1
changelog:
  - installed source code in Mozilla CVS repository
    update URL tag to point to CVS repositoy
    (not yet a valid URL, still have to coordinate with Mozilla)
    minor tweak to src directory layout


author: John Dennis <jdennis@redhat.com> - 0.4-1
changelog:
  - add binding for NSS_NoDB_Init(), bug #509002
    move nss_init and nss_shutdown from ssl module to nss module


author: John Dennis <jdennis@redhat.com> - 0.5-1
changelog:
  - restore ssl.nss_init and ssl.nss_shutdown but make them deprecated
    add __version__ string to nss module


author: John Dennis <jdennis@redhat.com> - 0.7-1
changelog:
  - add support for symmetric encryption/decryption
    more support for digests (hashes)

    The following classes were added:
    PK11SymKey PK11Context

    The following methods and functions were added:
    get_best_wrap_mechanism          get_best_key_length
    key_gen                          derive
    get_key_length                   digest_key
    clone_context                    digest_begin
    digest_op                        cipher_op
    finalize                         digest_final
    read_hex                         hash_buf
    sec_oid_tag_str                  sec_oid_tag_name
    sec_oid_tag_from_name            key_mechanism_type_name
    key_mechanism_type_from_name     pk11_attribute_type_name
    pk11_attribute_type_from_name    get_best_slot
    get_internal_key_slot            create_context_by_sym_key
    import_sym_key                   create_digest_context
    param_from_iv                    param_from_algid
    generate_new_param               algtag_to_mechanism
    mechanism_to_algtag

    The following files were added:
    cipher_test.py digest_test.py


author: John Dennis <jdennis@redhat.com> - 0.8-1
changelog:
  - The following methods, properties  and functions were added:
    SecItem.type SecItem.len, SecItem.data
    PK11SymKey.key_data, PK11SymKey.key_length, PK11SymKey.slot
    create_context_by_sym_key
    param_from_iv
    generate_new_param
    get_iv_length
    get_block_size
    get_pad_mechanism
  - SecItem's now support indexing and slicing on their data
  - Clean up parsing and parameter validation of variable arg functions


author: John Dennis <jdennis@redhat.com> - 0.10-1
changelog:
  - Resolves: #619743, Update to latest upstream, changes include:
  - The following classes were added:
      InitParameters
      InitContext

  -The following module functions were added:
      nss.nss.nss_initialize()
      nss.nss.nss_init_context()
      nss.nss.nss_shutdown_context()
      nss.nss.nss_init_flags()

  - add nss_is_initialized()

  - Remove nss_init_nodb() when nss modules loads from previous version
    apparently this prevents subsequent calls to nss_init with a
    database to silently fail.
  - Clean up some cruft in doc/examples/verify_server.py

  - Invoke nss_init_nodb() when nss modules loads, this prevents segfaults
    in NSS if Python programmer forgot to call one of the NSS
    initialization routines.

  - Rename the classes X500Name, X500RDN, X500AVA to DN, RDN, AVA
    respectively.

  - DN and RDN objects now return a list of their contents when indexed by
    type, this is to support multi-valued items.

  - Fix bug where AVA object's string representation did not include it's
    type.

  - Enhance test/test_cert_components.py unit test to test for above
    changes.

  - Add CertificateRequest object

  - Fix incomplete read bug (due to read ahead buffer bookkeeping).
  - Remove python-nss specific httplib.py, no longer needed
    python-nss now compatible with standard library
  - Rewrite httplib_example.py to use standard library and illustrate
    ssl, non-ssl, connection class, http class usage

  - add nss.cert_usage_flags(), use it in ssl_example.py

  - Add format_lines() & format() methods to the new certificate extension objects.
  - Add printing of certificate extensions.
  - Add BasicContstraints certificate extension.
  - Fix several reference counting and memory problems discovered with valgrind.

  - fold in more ref counting patches from Miloslav Trmač <mitr@redhat.com>
    into upstream.
    Did not bump upstream version, just bumped release ver in this spec file.

  - Unicode objects now accepted as well as str objects for
    interfaces expecting a string.

  - Sockets were enhanced thusly:
      - Threads will now yield during blocking IO.
      - Socket.makefile() reimplemented
            file object methods that had been missing (readlines(), sendall(),
            and iteration) were implemented, makefile now just returns the same
            Socket object but increments an "open" ref count. Thus a Socket
            object behaves like a file object and must be closed once for each
            makefile() call before it's actually closed.
      - Sockets now support the iter protocol
      - Add Socket.readlines(), Socket.sendall()

  - The following classes were added:
      AuthKeyID
      BasicConstraints
      CRLDistributionPoint
      CRLDistributionPts
      CertificateExtension
      GeneralName
      SignedCRL
      X500AVA
      X500Name
      X500RDN

  - The following module functions were added:
      nss.nss.cert_crl_reason_from_name()
      nss.nss.cert_crl_reason_name()
      nss.nss.cert_general_name_type_from_name()
      nss.nss.cert_general_name_type_name()
      nss.nss.cert_usage_flags()
      nss.nss.decode_der_crl()
      nss.nss.der_universal_secitem_fmt_lines()
      nss.nss.import_crl()
      nss.nss.make_line_pairs()
      nss.nss.oid_dotted_decimal()
      nss.nss.oid_str()
      nss.nss.oid_tag()
      nss.nss.oid_tag_name()
      nss.nss.read_der_from_file()
      nss.nss.x509_alt_name()
      nss.nss.x509_ext_key_usage()
      nss.nss.x509_key_usage()

  - The following class methods and properties were added:
    Note: it's a method if the name is suffixed with (), a propety otherwise
      Socket.next()
      Socket.readlines()
      Socket.sendall()
      SSLSocket.next()
      SSLSocket.readlines()
      SSLSocket.sendall()
      AuthKeyID.key_id
      AuthKeyID.serial_number
      AuthKeyID.get_general_names()
      CRLDistributionPoint.issuer
      CRLDistributionPoint.get_general_names()
      CRLDistributionPoint.get_reasons()
      CertDB.find_crl_by_cert()
      CertDB.find_crl_by_name()
      Certificate.extensions
      CertificateExtension.critical
      CertificateExtension.name
      CertificateExtension.oid
      CertificateExtension.oid_tag
      CertificateExtension.value
      GeneralName.type_enum
      GeneralName.type_name
      GeneralName.type_string
      SecItem.der_to_hex()
      SecItem.get_oid_sequence()
      SecItem.to_hex()
      SignedCRL.delete_permanently()
      X500AVA.oid
      X500AVA.oid_tag
      X500AVA.value
      X500AVA.value_str
      X500Name.cert_uid
      X500Name.common_name
      X500Name.country_name
      X500Name.dc_name
      X500Name.email_address
      X500Name.locality_name
      X500Name.org_name
      X500Name.org_unit_name
      X500Name.state_name
      X500Name.add_rdn()
      X500Name.has_key()
      X500RDN.has_key()

  - The following module functions were removed:
    Note: use nss.nss.oid_tag() instead
      nss.nss.sec_oid_tag_from_name()
      nss.nss.sec_oid_tag_name()
      nss.nss.sec_oid_tag_str()

  - The following files were added:
      doc/examples/cert_dump.py
      test/test_cert_components.py

  - Apply patches from  Miloslav Trmač <mitr@redhat.com>
    for ref counting and threading support. Thanks Miloslav!

  - Review all ref counting, numerous ref counting fixes

  - Implement cyclic garbage collection support by
    adding object traversal and clear methods

  - Identify static variables, move to thread local storage


author: John Dennis <jdennis@redhat.com> - 0.10-2
changelog:
  - Related: #619743
  - split documentation out into separate doc sub-package
    and make building api documentation optional


author: John Dennis <jdennis@redhat.com> - 0.10-3
changelog:
  - Related: #619743
  - Fix all rpmlint warnings
  - doc for license, changelog etc. now in main package,
    doc subpackage now only contains api doc, examples, test, etc.
  - Filter provides for .so files
  - Remove execute permission on everything in docdir
  - Capitalize description


author: John Dennis <jdennis@redhat.com> - 0.11-1
changelog:
  - Resolves: #670951
  - Resolves: #674014

    * Better support for IPv6

    * Add AddrInfo class to support IPv6 address resolution. Supports
      iteration over it's set of NetworkAddress objects and provides
      hostname, canonical_name object properties.

    * Add PR_AI_* constants.

    * NetworkAddress constructor and NetworkAddress.set_from_string() added
      optional family parameter. This is necessary for utilizing
      PR_GetAddrInfoByName().

    * NetworkAddress initialized via a string paramter are now initalized via
      PR_GetAddrInfoByName using family.

    * Add NetworkAddress.address property to return the address sans the
      port as a string. NetworkAddress.str() includes the port. For IPv6 the
      a hex string must be enclosed in brackets if a port is appended to it,
      the bracketed hex address with appended with a port is unappropriate
      in some circumstances, hence the new address property to permit either
      the address string with a port or without a port.

    * Fix the implementation of the NetworkAddress.family property, it was
      returning bogus data due to wrong native data size.

    * HostEntry objects now support iteration and indexing of their
      NetworkAddress members.

    * Add io.addr_family_name() function to return string representation of
      PR_AF_* constants.

    * Modify example and test code to utilize AddrInfo instead of deprecated
      NetworkAddress functionality. Add address family command argument to
      ssl_example.

    * Fix pty import statement in test/setup_certs.py

      Deprecated Functionality:
      -------------------------

    * NetworkAddress initialized via a string paramter is now
      deprecated. AddrInfo should be used instead.

    * NetworkAddress.set_from_string is now deprecated. AddrInfo should be
      used instead.

    * NetworkAddress.hostentry is deprecated. It was a bad idea,
      NetworkAddress objects can support both IPv4 and IPv6, but a HostEntry
      object can only support IPv4. Plus the implementation depdended on
      being able to perform a reverse DNS lookup which is not always
      possible.

    * HostEntry.get_network_addresses() and HostEntry.get_network_address()
      are now deprecated. In addition their port parameter is now no longer
      respected. HostEntry objects now support iteration and
      indexing of their NetworkAddress and that should be used to access
      their NetworkAddress objects instead.


author: John Dennis <jdennis@redhat.com> - 0.11-2
changelog:
  - Resolves: #670951
  - Resolves: #674014
    Rebuild enabling api doc generation, it had been disabled because
    the buildroots on 6.1 contained a verion of epydoc that crashed,
    release engineering has updated epydoc in the buildroots.
    There are NO changes in the package source.


author: John Dennis <jdennis@redhat.com> - 0.11-3
changelog:
  - Resolves: #689807
    Add family parameter to Socket constructors in examples and doc.
    Mark implicit family parameter as deprecated.
    Raise exception if Socket family does not match NetworkAddress family.
    Add --server-subject to setup_certs.py (made testing IPv6 easier without DNS)


author: John Dennis <jdennis@redhat.com> - 0.13-0
changelog:
  - Resolves: #827616
  - Resolves: #642795
  - Resolves: #698663
  - Resolves: #796295

    Introduced in 0.13:

    * Fix NSS SECITEM_CompareItem bug via workaround.

    * Fix incorrect format strings in PyArg_ParseTuple* for:
      - GeneralName
      - BasicConstraints
      - cert_x509_key_usage

    * Fix bug when decoding certificate BasicConstraints extension

    * Fix hang in setup_certs.

    * For NSS >= 3.13 support CERTDB_TERMINAL_RECORD

    * You can now query for a specific certificate extension
      Certficate.get_extension()

    * The following classes were added:
      - RSAGenParams

    * The following class methods were added:
      - nss.nss.Certificate.get_extension
      - nss.nss.PK11Slot.generate_key_pair
      - nss.nss.DSAPublicKey.format
      - nss.nss.DSAPublicKey.format_lines

    * The following module functions were added:
      - nss.nss.pub_wrap_sym_key

    * The following internal utilities were added:
      - PyString_UTF8
      - SecItem_new_alloc()

    * The following class constructors were modified to accept
      intialization parameters

      - KEYPQGParams (DSA generation parameters)

    * The PublicKey formatting (i.e. format_lines) was augmented
      to format DSA keys (formerly it only recognized RSA keys).

    * Allow lables and values to be justified when printing objects

    * The following were deprecated:
      - nss.nss.make_line_pairs (replaced by nss.nss.make_line_fmt_tuples)

      Deprecated Functionality:
      -------------------------
      - make_line_pairs() has been replaced by make_line_fmt_tuples()
        because 2-valued tuples were not sufficently general. It is
        expected very few programs will have used this function, it's mostly
        used internally but provided as a support utility.

    Introduced in 0.12:

    * Major new enhancement is additon of PKCS12 support and
      AlgorithmID's.

    * setup.py build enhancements
      - Now searches for the NSS and NSPR header files rather
        than hardcoding their location. This makes building friendlier
        on other systems (i.e. debian)
      - Now takes optional command line arguments, -d or --debug
        will turn on debug options during the build.

    * Fix reference counting bug in PK11_password_callback() which
      contributed to NSS not being able to shutdown due to
      resources still in use.

    * Add UTF-8 support to ssl.config_server_session_id_cache()

    * Added unit tests for cipher, digest, client_server.

    * All unittests now run, added test/run_tests to invoke
      full test suite.

    * Fix bug in test/setup_certs.py, hardcoded full path to
      libnssckbi.so was causing failures on 64-bit systems,
      just use the libnssckbi.so basename, modutil will find
      it on the standard search path.

    * doc/examples/cert_dump.py uses new AlgorithmID class to
      dump Signature Algorithm

    * doc/examples/ssl_example.py now can cleanly shutdown NSS.

    * Exception error messages now include PR error text if available.

    * The following classes were replaced:
      - SignatureAlgorithm replaced by new class AlgorithmID

    * The following classes were added:
      - AlgorithmID
      - PKCS12DecodeItem
      - PKCS12Decoder

    * The following class methods were added:
      - PK11Slot.authenticate()
      - PK11Slot.get_disabled_reason()
      - PK11Slot.has_protected_authentication_path()
      - PK11Slot.has_root_certs()
      - PK11Slot.is_disabled()
      - PK11Slot.is_friendly()
      - PK11Slot.is_internal()
      - PK11Slot.is_logged_in()
      - PK11Slot.is_removable()
      - PK11Slot.logout()
      - PK11Slot.need_login()
      - PK11Slot.need_user_init()
      - PK11Slot.user_disable()
      - PK11Slot.user_enable()
      - PKCS12DecodeItem.format()
      - PKCS12DecodeItem.format_lines()
      - PKCS12Decoder.database_import()
      - PKCS12Decoder.format()
      - PKCS12Decoder.format_lines()

    * The following class properties were added:
      - AlgorithmID.id_oid
      - AlgorithmID.id_str
      - AlgorithmID.id_tag
      - AlgorithmID.parameters
      - PKCS12DecodeItem.certificate
      - PKCS12DecodeItem.friendly_name
      - PKCS12DecodeItem.has_key
      - PKCS12DecodeItem.shroud_algorithm_id
      - PKCS12DecodeItem.signed_cert_der
      - PKCS12DecodeItem.type
      - SignedData.data
      - SignedData.der

    * The following module functions were added:
      - nss.nss.dump_certificate_cache_info()
      - nss.nss.find_slot_by_name()
      - nss.nss.fingerprint_format_lines()
      - nss.nss.get_internal_slot()
      - nss.nss.is_fips()
      - nss.nss.need_pw_init()
      - nss.nss.nss_init_read_write()
      - nss.nss.pk11_disabled_reason_name()
      - nss.nss.pk11_disabled_reason_str()
      - nss.nss.pk11_logout_all()
      - nss.nss.pkcs12_cipher_from_name()
      - nss.nss.pkcs12_cipher_name()
      - nss.nss.pkcs12_enable_all_ciphers()
      - nss.nss.pkcs12_enable_cipher()
      - nss.nss.pkcs12_export()
      - nss.nss.pkcs12_map_cipher()
      - nss.nss.pkcs12_set_nickname_collision_callback()
      - nss.nss.pkcs12_set_preferred_cipher()
      - nss.nss.token_exists()
      - nss.ssl.config_mp_server_sid_cache()
      - nss.ssl.config_server_session_id_cache_with_opt()
      - nss.ssl.get_max_server_cache_locks()
      - nss.ssl.set_max_server_cache_locks()
      - nss.ssl.shutdown_server_session_id_cache()

    * The following constants were added:
      - nss.nss.int.PK11_DIS_COULD_NOT_INIT_TOKEN
      - nss.nss.int.PK11_DIS_NONE
      - nss.nss.int.PK11_DIS_TOKEN_NOT_PRESENT
      - nss.nss.int.PK11_DIS_TOKEN_VERIFY_FAILED
      - nss.nss.int.PK11_DIS_USER_SELECTED
      - nss.nss.int.PKCS12_DES_56
      - nss.nss.int.PKCS12_DES_EDE3_168
      - nss.nss.int.PKCS12_RC2_CBC_128
      - nss.nss.int.PKCS12_RC2_CBC_40
      - nss.nss.int.PKCS12_RC4_128
      - nss.nss.int.PKCS12_RC4_40

    * The following files were added:
      - test/run_tests
      - test/test_cipher.py (replaces cipher_test.py)
      - test/test_client_server.py
      - test/test_digest.py (replaces digest_test.py)
      - test/test_pkcs12.py

    * The following were deprecated:
      - SignatureAlgorithm


author: John Dennis <jdennis@redhat.com> - 0.13-1
changelog:
  - Resolves: #642795
    add python-nss-size_t.patch, some types involved with ssize_t were
    improperly defined causing a segfault on the s390x and ppc64 arches.


author: John Dennis <jdennis@redhat.com> - 0.16-1
changelog:
  - Resolves: #1154776  Add API call for SSL_VersionRangeSet (rebase)
  - See doc/Changelog for details concerning changes in versions
    0.14, 0.15, and 0.16 which this rebase encompasses.


author: Jeffrey C. Ollie <jeff@ocjtech.us> - 1.7.1-3
changelog:
  - Update to latest Python packaging guidelines.
  - Apply patch that fixes insecure use of RandomPool.


author: Jeffrey C. Ollie <jeff@ocjtech.us> - 1.7.5-1
changelog:
  - v1.7.5 (Ernest) 19jul09
  - -----------------------
  -  * added support for ARC4 cipher and CTR block chaining (Denis Bernard)
  -  * made transport threads daemonize, to fix python 2.6 atexit behavior
  -  * support unicode hostnames, and IP6 addresses (Maxime Ripard, Shikhar
  -    Bhushan)
  -  * various small bug fixes


author: Pavel Cahyna <pcahyna@redhat.com> - 1.7.5-3
changelog:
  - Fix a security flaw (CVE-2018-7750) in Paramiko's server mode
    (emphasis on **server** mode; this does **not** impact *client* use!)
    Backported from 1.10: https://gist.github.com/stevebeattie/0eb190004e10ba0926ad8782f89676ad
    Resolves #1557140


author: Pavel Cahyna <pcahyna@redhat.com> - 1.7.5-4
changelog:
  - Fix and enable tests (%check).
  - Backport a change which makes tests exit with nonzero status when they fail.
  - Add a fix for upstream tests for CVE-2018-7750 (broken in previous).


author: Luke Macken <lmacken@redhat.com> - 0.9.3-2
changelog:
  - Clean up docs directory
  - Remove shebang from from non-executable scripts
  - Use consistent build root variables


author: David Malcolm <dmalcolm@redhat.com> - 1.7.2-5
changelog:
  - add patch from http://trac.pythonpaste.org/pythonpaste/ticket/314 to fix SSL
  support on Python 2.6 (rhbz:588546)


author: David Malcolm <dmalcolm@redhat.com> - 1.7.4-1
changelog:
  - rebase to 1.7.4; drop SSL patch (present in that tarball)
  - fix license tag
  - add requirement on pyOpenSSL
  - specfile cleanups
  Resolves: rhbz#613191


author: Ralph Bean <rbean@redhat.com> - 0.6.1-1
changelog:
  - New upstream version
  - Added support for python3
  - Included README, COPYING, and CHANGELOG in docs


author: Jan Pokorny <jpokorny@redhat.com> - 0.2.1-5.2
changelog:
  - Fix install_requires contains forward-incompatible
    "PEAK-Rules>=0.5a1.dev-r2562,==dev" specification
  Resolves: rhbz#1321133


author: - Devrim GUNDUZ <devrim@commandprompt.com> 2.0.2-3
changelog:
  - Removed python dependency, per bugzilla review. (#199784)
  - Changed doc package group, per bugzilla review. (#199784)
  - Replaced dos2unix with sed, per guidelines and bugzilla review (#199784)
  - Fix changelog dates


author: - Devrim GUNDUZ <devrim@commandprompt.com> 2.0.3-2
changelog:
  - Fixed 64 bit builds
  - Fixed license
  - Added Zope subpackage
  - Fixed typo in doc description
  - Added macro for zope subpackage dir


author: - Devrim GUNDUZ <devrim@commandprompt.com> 2.0.3-3
changelog:
  - Fixed zope package dependencies and macro definition, per bugzilla review (#199784)
  - Fixed zope package directory ownership, per bugzilla review (#199784)
  - Fixed cp usage for zope subpackage, per bugzilla review (#199784)


author: Tom Lane <tgl@redhat.com> 2.0.13-2
changelog:
  - Fix rpmlint complaints: remove unneeded explicit Requires:, use Conflicts:
    instead of bogus Obsoletes: to indicate lack of zope subpackage


author: Tom Lane <tgl@redhat.com> 2.0.14-1
changelog:
  - Update to 2.0.14 to get the last few upstream fixes in this release series,
    and to not be behind what MRG has shipped for RHEL-5
  - Fix refcount leaks in _mogrify()
  Resolves: #765998


author: Rob Crittenden <rcritten@redhat.com> - 0.0.7a-4
changelog:
  - Use setuptools to install the package
  - simplify the files included in the rpm so it includes the .egg-info


author: Peter Jones <pjones@redhat.com> - 0.5-1
changelog:
  - make it possible to easily build dm maps from dmraid tables
  - support for partition table scanning


author: Peter Jones <pjones@redhat.com> - 0.8-1
changelog:
  - prevent getRaidSets() from returning devices with missing members
  - add "make flat_install" to make installing in RHupdates easier ;)


author: Peter Jones <pjones@redhat.com> - 0.11-1
changelog:
  - never trust dmraid on sync vs nosync; right now, always transform the
    table to "default" (no argument), which is to sync only when necessary,
    whatever that means.  Seems to lock up less often.


author: Peter Jones <pjones@redhat.com> - 0.12-1
changelog:
  - split __init__.py into separate files according to function
  - disable "nosync" hack for now
  - fix a refcounting bug in pydmraid_raidset_get_dm_table()
  - add block.RaidDev.__cmp__()
  - fix some type errors gcc can't check for when using pyblock_potoll
  - be a little pickier about types for mode, devices, and sizes.
  - add make rules for debugging
  - fix "_init__" typo
  - always use local import paths, and be much more strict about namespaces
  - always make a new dm.device in BlockDev.From*()
  - better defaults in BlockDev.create()
  - add setter for block.dmraid.raidset.name, and rework RaidSet.set_name()
  - rework RaidDev.get_bdev()
  - rework "prefix" for RaidSet and RaidDev
  - add getter for block.dmraid.raidset.map
  - change arg order on block.dm.map.__init__() since there's no way to pass
    keyword args through the "abstract" interface.
  - use self.name not self.rs.name in the RaidSet, and make changing the name
    work.
  - make pydm_map_compare() compare names _last_, so we can compare a map
    that's been renamed with its earlier instantiations correctly.
  - mark a device as degraded if there's any descrepancy at all between
    the number of members we find vs what we expect


author: Peter Jones <pjones@redhat.com> - 0.14-1
changelog:
  - remove member partitions when we activate, rebuild them when we deactivate
  - add another "count_devices(ctx->lc, NATIVE)" in discover_raiddevs.  it
    seems to help...


author: Peter Jones <pjones@redhat.com> - 0.17-1
changelog:
  - make multipath support more robust
  - fix leaky file descriptor on volumes without partition tables


author: Peter Jones <pjones@redhat.com> - 0.19-1
changelog:
  - Make RaidSet deactivation work like MultiPath deactivation.  Fixes a
    traceback when removing partition maps.


author: Peter Jones <pjones@redhat.com> - 0.22-1
changelog:
  - Fix partition removal when we've changed the partition table out from
    under a RaidSet or MultiPath.


author: Peter Jones <pjones@redhat.com> - 0.24-1
changelog:
  - add block.load() to load specific bdevid probes instead of always
    doing loadAll() (#208423)
  - make block.getMPaths() return a sorted list (#208337, #208431)


author: Peter Jones <pjones@redhat.com> - 0.25-1
changelog:
  - fix refcounting of map names and partition building for new maps (#210412)
  - fix naming so device names on a single controller are in LUN order


author: Jeremy Katz <katzj@redhat.com> - 0.27-1
changelog:
  - fix build for other python versions, build against python 2.5
  - fix for Py_ssize_t changes in python 2.5


author: Hans de Goede <hdegoede@redhat.com> - 0.33-1
changelog:
  - Allow use as non root (for pychecker)
  - Forward port: "ERROR: only one argument allowed for this option"
    workaround from RHEL-5 (#468649, #474399)


author: Hans de Goede <hdegoede@redhat.com> - 0.34-1
changelog:
  - Add functions that relate dm nodes and dm names (jgranados)
  - Make dmraid devices recursive (fixes dmraid 10 / 01) (jgranados)
  - When importing dm from C-code import it as block.dm, this fixes pyblock
    not working with python 2.6 (hansg)


author: Joel Granados <jgranado@redhat.com> - 0.35-1
changelog:
  - Make pyblock compatible with new pyparted (jgranado).
  - Stop confusing raiddevs and raidsets (hansg).
  - pyparted now trhows an IOException when it does not recognize the part (hansg).
  - Fix traceback when activating already active dmraid set (hansg).
  - Refactor and make functional the getDmDeps and getDmTarget functions (dlehman).
  - Implement compare function for dm-tables (jgranado).


author: Hans de Goede <hdegoede@redhat.com> - 0.37-1
changelog:
  - Handle dmraid dm table's with multiple rows / targets properly, this fixes
    dmraid jbod configurations (hansg)
  - Various small cleanups and bugfixes (hansg)


author: Hans de Goede <hdegoede@redhat.com> - 0.38-1
changelog:
  - Add additional functionality for the anaconda storage rewrite (jgranados)
  - Do not Py_DECREF imported dm module reference (hansg)
  - Only install our own dm_log handler while doing dm stuff (hansg)


author: Joel Granados <jgranado@redhat.com> - 0.41-1
changelog:
  - Make build/tagging easier (jgranados).
  - Do not try to find and activate partitions on raid subsets (hansg).


author: Hans de Goede <hdegoede@redhat.com> - 0.42-1
changelog:
  - Create assertion function to return PyErrors (jgranados)
  - Do a thorough search for the Raid Sets (jgranados)
  - RaidSet.level is broken atm (hansg)


author: Hans de Goede <hdegoede@redhat.com> - 0.44-1
changelog:
  - Use dmraid's status instead of figuring out if a set is degraded ourselves
    (#524168)
  - Fix typo causing backtrace when doing activate deactivate 2x for dmraid 10


author: Hans de Goede <hdegoede@redhat.com> - 0.45-1
changelog:
  - Remove libbdevid-python usage and dependency (#549102)
    Resolves: #549102
  - Stop linking against zlib (unused)


author: Hans de Goede <hdegoede@redhat.com> - 0.46-1
changelog:
  - When a stripe set is missing disks it is not degraded, but broken,
    add a check for broken sets (#564305)
    Resolves: #564305
  - Various specfile fixes / cleanups


author: Jeffrey C. Ollie <jeff@ocjtech.us> - 7.18.1-1
changelog:
  - Update to 7.18.1
  - Disable tests because it's not testing the built library, it's trying to
    test an installed library.


author: Jeffrey C. Ollie <jeff@ocjtech.us> - 7.18.2-1
changelog:
  - Update to 7.18.2
  - Thanks to Ville Skyttä re-enable the tests and fix a minor problem
    with the setup.py. (Bug # 45400)


author: Karel Klic <kklic@redhat.com> - 7.19.0-6
changelog:
  - Added do_curl_reset-refcount.patch: Fixed reference counting of
    Py_None in reset function
    Resolves: rhbz#624559
  - Added do_curl_reset-reinitialize-handle.patch: Proper
    re-initialization of internal settings in reset function
    Resolves: rhbz#565654


author: Kyle VanderBeek <kylev@kylev.com> - 0.9.6.2-1
changelog:
  - Update to 0.9.6.2
  - remove now-gone docs/ tree
  - Use find to get rid of OSX packaging artifacts ("._" files)


author: Rafael Schloming <rafaels@redhat.com> - 0.2-11
changelog:
  - Install the scripts from the commands directory, update the source
    tarball, and include the svn revision number in the version.


author: Rafael Schloming <rafaels@redhat.com> - 0.7.946106-12
changelog:
  - Fixes to examples for compatibility with older python versions
  - Fix for bz621998
  - Fix for bz620402


author: Rafael Schloming <rafaels@redhat.com> - 0.7.946106-15
changelog:
  - Fix for bz537481
  - Fix for bz648927
  - Fix for bz655141
  - Fix for bz655078
  - Fix for bz642686
  - Fix for bz640312
  - Fix for bz635016


author: Justin Ross <jross@redhat.com> - 0.14-1
changelog:
  - Rebase to 0.14
  - rhbz#743657 - The pure-python QMF console unnecessarily retains
    references to query results
  - rhbz#699499 - [RFE] qmfv2 must provide mainloop integration
  - rhbz#681680 - QMF agents wake up several times a second
  - rhbz#663461 - Enable new architectures
  - Remove python-qpid-qmf and ruby-qpid-qmf from ppc and s390 architectures


author: Brian Pepple <bdpepple@ameritech.net> - 1.20-1.fc4
changelog:
  - Rebuild for Python 2.4.
  - Update to 1.20.
  - Switch to the new python macros for python-abi
  - Add dist tag.


author: Marek Kasik <mkasik@redhat.com> - 2.3-3
changelog:
  - Add -fno-strict-aliasing to pass "Testsuite regressions" test
  - Make docs subpackage "noarch"
  - Resolves: #605103


author: Luke Macken <lmacken@redhat.com> - 1.0-0.2.rc1
changelog:
  - Update to 1.0rc1
  - Add python-elixir, python-sqlalchemy, python-coverage, python-nose,
    and python-repoze-who to the BuildRequires
  - Remove the setuptools patch


author: Arun SAG <sagarun@gmail.com> - 0.5.1-2
changelog:
  - Remove OPT_FLAGS from build section since it is a noarch package
  - Fix use of mixed tabs and space
  - Remove extra space around the word cumbersome in description


author: Arun SAG <sagarun@gmail.com> - 0.9.3-1
changelog:
  - Updated to new upstream version 0.9.3
  - Include python-gevent as a dependency for requests.async
  - Clean up shebangs in requests/setup.py,test_requests.py and test_requests_ext.py


author: Arun S A G <sagarun@gmail.com> 0.13.1-1
changelog:
  - Updated to latest upstream release 0.13.1
  - Use system provided ca-certificates
  - No more async requests use grrequests https://github.com/kennethreitz/grequests
  - Remove gevent as it is no longer required by requests


author: Toshio Kuratomi <toshio@fedoraproject.org> - 0.14.1-4
changelog:
  - Let brp_python_bytecompile run again, take care of the non-python{2,3} modules
    by removing them from the python{,3}-requests package that they did not belong
    in.
  - Use the certificates in the ca-certificates package instead of the bundled one
    + https://bugzilla.redhat.com/show_bug.cgi?id=904614
  - Fix a problem with cookie handling
    + https://bugzilla.redhat.com/show_bug.cgi?id=906924


author: Ralph Bean <rbean@redhat.com> - 1.1.0-1
changelog:
  - Latest upstream.
  - Relicense to ASL 2.0 with upstream.
  - Removed cookie handling patch (fixed in upstream tarball).
  - Updated cert unbundling patch to match upstream.
  - Added check section, but left it commented out for koji.


author: Ralph Bean <rbean@redhat.com> - 1.1.0-2
changelog:
  - Unbundled python-charade/chardet.  Using system python-chardet now.
  - Removed deprecated comments and actions against oauthlib unbundling.
    Those are no longer necessary in 1.1.0.
  - Added links to bz tickets over Patch declarations.


author: Ralph Bean <rbean@redhat.com> - 1.1.0-3
changelog:
  - Unbundled python-urllib3.  Using system python-urllib3 now.
  - Conditionally include python-ordereddict for el6.


author: Matej Stuchlik <mstuchli@redhat.com> - 2.6.0-2
changelog:
  - Remove bundled directories altogether, requests are smart enough
    to import system modules, fixes a problem with updating requests
    from 2.3.0
  Resolves: rhbz#1212145


author: Charalampos Stratakis <cstratak@redhat.com> - 2.6.0-4
changelog:
  - Ensure that urllib3.connection module is imported only once so connections
    to HTTPS servers that require SNI support do not fail
  Resolves: rhbz#1382682


author: Andy Grover <agrover@redhat.com> - 1.9.9-6
changelog:
  - Update based on review comments
    - Fully document steps to build archive
    - Remove commented-out extraneous text
    - Remove a repeat in Requires line
    - Update git-version.patch to have proper sha1
    - Change location of fabric spec files to /var/lib/target
  - Remove unused specs


author: Andy Grover <agrover@redhat.com> - 2.1.fb20-1
changelog:
  - Update to new upstream version
  - Remove patches
    * fix nodeacl-dump.patch
    * retry-target-creation.patch


author: Andy Grover <agrover@redhat.com> - 2.1.fb21-3
changelog:
  - Add patches:
      0003-Fix-dumping-of-PSCSI-storage-objects.patch
      0004-pscsi-Save-udev_path-instead-of-h-c-t-l.patch
      0005-fix-colonize.patch
      0006-Add-support-for-NodeACL-tag.patch
      0007-Fix-up-tag-save-restore.patch
  - Rename existing patches to match naming scheme


author: Rafael Schloming <rafaels@redhat.com> - 0.1.897961-1
changelog:
  - Added groups to subpackages.
  - Replaced python_sitelib with python_sitearch, use %global instead of %define, and killed unused ruby_sitelib.


author: Arnaldo Carvalho de Melo <acme@redhat.com> - 0.2-1
changelog:
  - Add get_priority_{min,max} methods
  - Add constants for SCHED_{BATCH,FIFO,OTHER,RR}
  - Implement get_priority method
  - Add pchrt utility for testing the bindings, chrt clone
  - Add ptaskset utility for testing the bindings, taskset clone


author: Konstantin Ryabitsev <icon@fedoraproject.org> - 0.6b3-1
changelog:
  - Taking over from Ignacio
  - Version 0.6b3
  - Ghost .pyo files in sitelib
  - Add license files
  - Remove manual python-abi, since we're building FC4 and up
  - Kill .exe files


author: Konstantin Ryabitsev <icon@fedoraproject.org> - 0.6c6-2
changelog:
  - Make license tag conform to the new Licensing Guidelines
  - Move everything except pkg_resources.py into a separate -devel package
    so we avoid bundling python-devel when it's not required (#251645)
  - Do not package tests


author: Konstantin Ryabitsev <icon@fedoraproject.org> - 0.6c7-1
changelog:
  - Upstream 0.6c7
  - Move some things from devel into runtime, in order to not break other
    projects.


author: Konstantin Ryabitsev <icon@fedoraproject.org> - 0.6c7-2
changelog:
  - Move pretty much everything back into runtime in order to avoid more
    brokenness than we're trying to address with these fixes.


author: David Malcolm <dmalcolm@redhat.com> - 0.6.10-1
changelog:
  - Switch over to using the "distribute" project; rebase to 0.6.10 (rhbz:570350)
  - Remove svn patch as upstream has chosen to go with an easier change for now.
  - Move easy_install back into the main package as the needed files have been
    moved from python-devel to the main python package.


author: David Malcolm <dmalcolm@redhat.com> - 0.6.10-2
changelog:
  - delete stray ".orig" file
  - change %define to %global ; use %{buildroot} rather than env var
  - move %check lower down
  - explicitly list executables


author: David Malcolm <dmalcolm@redhat.com> - 0.6.10-3
changelog:
  - cherrypick upstream patch for easy_install (ignore locally installed
  packages: patch0)
  - provide "python-distribute"
  - add README.txt and other .txt documentation files to the payload
  Resolves: rhbz#613138


author: Kyle VanderBeek <kylev@kylev.com> - 2.0.9-1
changelog:
  - Update to 2.0.9
  - Make sure to require gcc to the speedups get compiled
  - Fix description since we're not "pure" python
  - Change to pypi instead of cheesehop


author: Nils Philippsen <nphilipp@redhat.com> - 0.1.4
changelog:
  - implement PolicyKit convenience functions and decorators
  - rename slip.dbus.service.TimeoutObject -> slip.dbus.service.Object


author: Nils Philippsen <nphilipp@redhat.com> - 0.1.6
changelog:
  - move proxy.polkit_enable to polkit.enable_proxy
  - rename polkit.NotAuthorized to NotAuthorizedException, polkit.auth_required
    to require_auth


author: Nils Philippsen <nils@redhat.com> - 0.2.12-1
changelog:
  - use os.path.abspath instead of .realpath (#615819)
  - use tempfile.mkstemp
  - don't use hardcoded file ext separator


author: Nils Philippsen <nils@redhat.com> - 0.2.17-1
changelog:
  - fix default timeouts of None in bus objects (#716620)
  - reduce proxy method calling overhead a bit more


author: Nils Philippsen <nils@redhat.com> - 0.2.19-1
changelog:
  - allow service object methods to be called locally
  - preserve signature, docstrings, etc. of decorated methods


author: Gareth Armstrong <gareth.armstrong@hp.com> - 0.6.5-1.hp
changelog:
  - Update to 0.6.5
  - Initial import of python-sphinx from Fedora Rawhide for use in HP CMS
  - Enforce that Sphinx requires Python 2.4 or later via an explicit BR
  - Minor tweaks to spec file
  - Move language files to %{_datadir}, idea borrowed from Debian's sphinx
    package
  - Deliver man pages for sphinx-build & sphinx-quickstart
  - Deliver rst documentation files to reST directory in doc sub-package
  - Add %check section for Python2 and add BR on python-nose


author: Toshio Kuratomi <toshio@tiki-lounge.com> - 0.3.1-2
changelog:
  - Bump and rebuild for python 2.5 on devel.
  - BuildRequire: python-devel as a header is missing otherwise.


author: Toshio Kuratomi <a.badger@gmail.com> - 0.4.0-0.3.beta4
changelog:
  - setuptools seems to be broken WRT having an active and inactive version
    of an egg.  Have to make both versions inactive and manually setup a copy
    that can be started via import. (Necessary for the sqlalchemy0.3 compat
    package.)


author: Toshio Kuratomi <toshio@fedoraproject.org> - 0.5-0.1.rc4
changelog:
  - Update to 0.5.0rc4 which works with the new pysqlite
  - And update test cases to work with the new pysqlite


author: jortel <jortel@redhat.com> - 0.3.1-1
changelog:
  - Extends the support for multi-port services introduced earlier. This addition, 
    provides for multiple services to define the *same* method and suds will
    handle it properly.  See section 'SERVICES WITH MULTIPLE PORTS:'
  - Add support for multi-document document/literal soap binding style.
    See section 'MULTI-DOCUMENT Docuemnt/Literal:'
  - Add support for (xs:group, xs:attributeGroup) tags.
  - Add Client.last_sent() and Client.last_received().


author: jortel <jortel@redhat.com> - 0.3.2-1
changelog:
  - Add SOAP MultiRef support
  - Add support for new schema tags:
      <xs:include/>
      <xs:simpleContent/>
      <xs:group/>
      <xs:attributeGroup/>
  - Added support for new xs <--> python type conversions:
      xs:int
      xs:long
      xs:float
      xs:double
  - Revise marshaller and binding to further sharpen the namespacing of nodes produced.
  - Infinite recursion fixed in ''xsd'' package dereference() during schema loading.
  - Add support for <wsdl:import/> of schema files into the wsdl root <definitions/>.
  - Fix double encoding of (&)
  - Add Client API:
      setheaders()  - Same as keyword but works for all invocations.
      addprefix()   - Mapping of namespace prefixes.
      setlocation() - Override the location in the wsdl.
      setproxy()    - Same as proxy keyword but for all invocations.
  - Add proper namespace prefix for soap headers.
  - Fixed Tickets: #5, #12, #34, #37, #40, #44, #45, #46, #48, #49, #50, #51


author: jortel <jortel@redhat.com> - 0.3.3-1
changelog:
  - No longer installs (tests) package.
  - Implements API-3 proposal
      Pluggable transport
      Keyword method arguments
      Baisc http authentication in default transport
  - Add namespace prefix normalization in soap message.
  - Better soap message pruning of empty nodes.
  - Fixed Tickets: #51 - #60.


author: jortel <jortel@redhat.com> - 0.3.4-1
changelog:
  - Static (automatic) Import.bind('http://schemas.xmlsoap.org/soap/encoding/')
  - Basic ws-security with {{{UsernameToken}}} and clear-text password only.
  - Add support for ''sparse'' soap headers via passing dictionary
  - Add support for arbitrary user defined soap headers
  - Fixes service operations with multiple soap header entries.
  - Schema loading and dereferencing algorithm enhancements.
  - Nested soap multirefs fixed.
  - Better (true) support for elementFormDefault="unqualified" provides more accurate namespaing.
  - WSDL part types no longer default to WSDL targetNamespace.
  - Fixed Tickets: #4, #6, #21, #32, #62, #66, #71, #72, #114, #155, #201.


author: jortel <jortel@redhat.com> - 0.3.5-1
changelog:
  - Adds http caching.  Default is (1) day.
  - Removed checking fc version in spec since no longer building < fc9.
  - Updated makefile to roll tarball with tar.sh.
  - Moved bare/wrapped determination to wsdl for document/literal.
  - Refactored Transport to provide better visibility into http headers.
  - Fixed Tickets: #207, #207, #209, #210, #212, #214, #215


author: jortel <jortel@redhat.com> - 0.3.6-1
changelog:
  - Change hard coded /tmp/suds to tempfile.gettempdir() and create suds/ on demand.
  - Fix return type for Any.get_attribute().
  - Update http caching to ignore file:// urls.
  - Better logging of messages when only the reply is injected.
  - Fix XInteger and XFloat types to translate returned arrays properly.
  - Fix xs:import schema with same namespace.
  - Update parser to not load external references and add Import.bind() for XMLSchema.xsd location.
  - Add schema doctor - used to patch XSDs at runtime.  (See Options.doctor)
  - Fix deprecation warnings in python 2.6.
  - Add behavior for @default defined on <element/>.
  - Change @xsi:type value to always be qualified for doc/literal.
  - Add Option.xstq option to control when @xsi:type is qualified.
  - Fixed Tickets: #64, #129, #205, #206, #217, #221, #222, #224, #225, #228, #229, #230


author: jortel <jortel@redhat.com> - 0.3.7-1
changelog:
  - Better soap header support
  - Added new transport HttpAuthenticated for active (not passive) basic authentication.
  - New options (prefixes, timeout, retxml)
  - WSDL processing enhancements.
  - Expanded builtin XSD type support.
  - Fixed <xs:iniclude/>
  - Better XML date/datetime conversion.
  - Client.clone() method added for lightweight copy of client object.
  - XSD processing fixes/enhancements.
  - Better <simpleType/> by <xs:restriction/> support.
  - Performance enhancements. 
  - Fixed tickets: #65, #232, #233, #235, #241, #242, #244, #247, #254, #254, #256, #257, #258


author: jortel <jortel@redhat.com> - 0.3.8-1
changelog:
  - Includeds Windows NTLM Transport.
  - Add missing self.messages in Client.clone().
  - Changed default behavior for WSDL PartElement to be optional.
  - Add support for services/ports defined without <address/> element in WSDL.
  - Fix sax.attribute.Element.attrib() to find by name only when ns is not specified; renamed to Element.getAttribute().
  - Update HttpTransport to pass timeout parameter to urllib2 open() methods when supported by urllib2.
  - Add null class to pass explicit NULL values for parameters and optional elements.
  - Soap encoded array (soap-enc:Array) enhancement for rpc/encoded.
    Arrays passed as python arrays - works like document/literal now.
    No more using the factory to create the Array.
    Automatically includes arrayType attribute.  Eg: soap-enc:arrayType="Array[2]".
    Reintroduced ability to pass complex (objects) using python dict instead of suds object via factory.
  - Fixed tickets: #84, #261, #262, #263, #265, #266, #278, #280, #282.


author: jortel <jortel@redhat.com> - 0.3.9-1
changelog:
  - Bumped python requires to 2.4
  - Replaced stream-based caching in the transport package with document-based caching.
  - Caches pickled Document objects instead of XML text. 2x Faster!
  - No more SAX parsing exceptions on damaged or incomplete cached files. 
  - Cached WSDL objects. Entire Definitions object including contained Schema object cached via pickle.
  - Copy of soap encoding schema packaged with suds.
  - Refactor Transports to use ProxyHandler instead of urllib2.Request.set_proxy().
  - Added WSSE enhancements <Timestamp/> and <Expires/> support. See: Timestamp token. 
  - Fixed Tickets: #256, #291, #294, #295, #296


author: jortel <jortel@redhat.com> - 0.4-1
changelog:
  - Fix spelling errors in spec description.
  - Fix source0 URL warning.
  - Updated caching to not cache intermediate wsdls.
  - Added DocumentCache which caches verified XML documents as text. User can choose.
  - Added cachingpolicy option to allow user to specify whether to cache XML documents or the WSDL object.
  - Provided for repeating values in reply for message parts consistent with way handled in nested objects.
  - Added charset=utf-8 to stock content-type http header.
  - Added <?xml version="1.0" encoding="UTF-8"?> to outgoing SOAP messages.
  - Detection of faults in successful (http=200) replies and raise WebFault. Search for <soapenv:Fault/>.
  - Add plugins facility. 
  - Fixed Tickets: #251, #313, #314, #334


author: Ricky Zhou <ricky@fedoraproject.org> - 0.3-3
changelog:
  - Change define to global.
  - Remove old >= 8 conditional.
  - Remove unnecessary BuildRequires on python-devel.


author: Luke Macken <lmacken@redhat.com> - 0.9.1-1
changelog:
  - Update to latest release
  - Remove python-paste-script, python-ruledispatch, python-decorator and
    python-decoratortools dependencies.


author: Luke Macken <lmacken@redhat.com> - 0.9.8-0.4.dev20090825
changelog:
  - Apply a patch from http://toscawidgets.org/trac/tw/ticket/30
    to fix problems with encoding javascript methods.


author: Luke Macken <lmacken@redhat.com> 0.9.9-1
changelog:
  - 0.9.9
  - Rename to python-turbojson
  - Own the %{python_sitelib/turbojson directory
  - Install the EGG-INFO


author: Luke Macken <lmacken@redhat.com> 1.2-1
changelog:
  - Latest upstream release, intended to be used with the upcoming TurboGears 1.1 version.
  - Remove python-turbojson-SAfix-r3749.patch


author: Luke Macken <lmacken@redhat.com> - 0.9.8-3
changelog:
  - Rename to python-turbokid
  - Own %{python_sitelib}/turbokid directory
  - Install the EGG-INFO directory


author: Thomas Vander Stichele <thomas at apestaart dot org>
changelog:
  - 2.4.0-2
  - add a README.fedora
  - made noarch, since it doesn't actually install any python twisted/ module
    code
  - fixed provides/obsoletes


author: Thomas Vander Stichele <thomas at apestaart dot org>
changelog:
  - 0.7.0-1
  - update to new upstream release
  - remove NoArch, since it is installed into an arch-specific twisted
    namespace


author: Matthias Saou <http://freshrpms.net/> 8.1.0-2
changelog:
  - Update to 8.1.0.
  - Merge back changes from Paul Howarth.
  - Make sure the scriplets never return a non-zero exit status.
  - Add tkinter requirement for tkconch (#440385).


author: Thomas Vander Stichele <thomas at apestaart dot org>
changelog:
  - 2.4.0-4
  - incorporate changes by Jeffrey C. Ollie:
  - add doc and zsh subpackage
  - remove executable bits from documentation files to avoid dependencies
  - remove shebang from some files
  - fix up end of line on some files
  - remove .c files from being packaged


author: Thomas Vander Stichele <thomas at apestaart dot org>
changelog:
  - 2.4.0-5
  - incorporate suggestions by Paul Howarth:
  - fix groups for doc and zsh
  - don't package _twisted_zsh_stub from the python_sitearch dir
  - generate README.zsh


author: Thomas Vander Stichele <thomas at apestaart dot org>
changelog:
  - 2.4.0-6
  - new twisted-dropin-cache; does not complain loudly about plugins in
    the cache that are no longer installed


author: Matthias Saou <http://freshrpms.net/> 8.1.0-2
changelog:
  - Re-introduce the python macro for parallel installable packages.
  - Make sure the scriplet never returns a non-zero exit status.
  - Remove dropin.cache file upon package removal.
  - Merge back changes from Paul Howarth.


author: Matthias Saou <http://freshrpms.net/> 8.1.0-2
changelog:
  - Update to 8.1.0.
  - Merge back changes from Paul Howarth.
  - Make sure the scriplets never return a non-zero exit status.


author: Matthias Saou <http://freshrpms.net/> 8.2.0-1
changelog:
  - Update to 8.2.0.
  - Change back spec cosmetic details from Paul's to Thomas' preference.
  - Remove no longer installed "bookify" program.


author: Jef Spaleta <jspaleta@gmail.com>
changelog:
  - 0.6.0-4
  - Docs and Url fixes as suggested in the review
  - Added BR for python-devel for python 2.5, merry Christmas!


author: Matthias Saou <http://freshrpms.net/> 8.2.0-1
changelog:
  - Update to 8.2.0.
  - Change back spec cosmetic details from Paul's to Thomas' preference.
  - Remove no longer installed t-im man page.


author: James Antill <james@fedoraproject.org> 3.0.0-6
changelog:
  - Fix the ftp byterange port problem:
  - Resolves: bug#419241
  - Fixup the progress UI:
  -   add function for total progress
  -   add total progress percentagee current download line
  -   add rate to current download line
  -   use dead space when finished downloading
  -   don't confuse download rate on regets.


author: James Antill <james@fedoraproject.org> 3.0.0-7
changelog:
  - Fix reget's against servers that don't allow Range requests, also tweaks
  - reget == check_timestamp, if anyone/thing uses that.
  - Resolves: bug#435156
  - Fix minor typo in progress for single instance.


author: James Antill <james@fedoraproject.org> 3.0.0-8
changelog:
  - Tweak progress output so it's hopefully less confusing
  - Add dynamic resizing ability to progress bar
  - Resolves: bug#437197


author: Valentina Mukhamedzhanova <vmukhame@redhat.com> 3.9.1-10
changelog:
  - Fix parsing of FTP 213 responses.
  - Resolves: bug#970262
  - Set proper errcode when raising URLGRabError.
  - Resolves: bug#1271242


author: Ralph Bean <rbean@redhat.com> - 1.5-3
changelog:
  - Renamed patches to python-urllib3-*
  - Fixed ssl check patch to use the correct cert path for Fedora.
  - Included dependency on ca-certificates
  - Cosmetic indentation changes to the .spec file.


author: Ralph Bean <rbean@redhat.com> - 1.5-4
changelog:
  - Upstream patch to fix Accept header when behind a proxy.
  - Reorganize patch numbers to more clearly distinguish them.


author: Charalampos Stratakis <cstratak@redhat.com> - 1.10.2-2
changelog:
  - Upstream patch for fixing issue of new configs not taken into account
  by the PoolManager instance
  Resolves: rhbz#1329382


author: Jeremy Katz <katzj@redhat.com> - 0.92.0-1
changelog:
  - Fix silly loop when asking about graphics support (misa)
  - Fix passing macaddr
  - Add support so that we reboot into the guest after installation finishes


author: Jeremy Katz <katzj@redhat.com> - 0.93.0-1
changelog:
  - Fix hvm network xm config (danpb)
  - Enable PAE with pae hvm hosts (danpb)
  - Fix hvm block backed cds (danpb)
  - Fix handling of block devs backed by vbds (danpb)
  - Ensure we're on a xen kernel (#205889)
  - Default to vncunused


author: Jeremy Katz <katzj@redhat.com> - 0.94.0-1
changelog:
  - Fix using block device as backing (#209138)
  - Fix error handling for invalid install locations (danpb)
  - Write out vcpu config (danpb)


author: Jeremy Katz <katzj@redhat.com> - 0.96.0-1
changelog:
  - improve check for if a machine is hvm capable to catch when support isn't
    allowed by the bios (#211276)
  - cleanup after nfs mount failure on pv install (#206196)
  - support for setting vcpus (#210516)


author: Daniel P. Berrange <berrange@redhat.com> - 0.98.0-3.fc7
changelog:
  - don't traceback on invalid memory param (gcosta, #219270)
  - let the console come back quicker to help with HVM installs (#212024)


author: Daniel P. Berrange <berrange@redhat.com> - 0.100.0-1.fc7
changelog:
  - Updated to 0.100.0 which now uses libvirt inactive domain support
    needed to operate correctly against xen 3.0.4


author: Daniel P. Berrange <berrange@redhat.com> - 0.103.0-1.fc7
changelog:
  - Updated to 0.103.0 release
  - More validation of UUIDs
  - Automatically reboot Windows guests with CDROM still attached
  - Allow '-'  in guest names
  - Adjust way distro detection is done


author: Daniel P. Berrange <berrange@redhat.com> - 0.103.0-3.fc7
changelog:
  - Fixed module import when using --accelerate
  - Fixed detection of RHEL5 client distro
  - Fixed default 'network's selection & default URI choice to
    not be Xen specific
  - Fixed features XML when using initrd for fullvirt


author: Daniel P. Berrange <berrange@redhat.com> - 0.300.0-1.fc8
changelog:
  - Updated to 0.300.0
  - Added virt-image tool
  - Switched to calling virsh console and virt-viewer
  - Improved user input validation


author: Cole Robinson <crobinso@redhat.com> - 0.300.3-2.fc9
changelog:
  - Keep qemu cdrom device after first stage of install. (rhbz #244802)
  - Fix default guest arch regression from virt-install
  - Pass extra args to a fullvirt guest from virt-install
  - Update polish translation


author: Cole Robinson <crobinso@redhat.com> - 0.400.0-1.fc10
changelog:
  - Add virt-convert tool
  - Add virt-pack tool
  - virt-install --disk option for using/provisioning libvirt storage
  - virt-install remote installation support
  - virt-install --sound option to add soundcard emulation


author: Cole Robinson <crobinso@redhat.com> - 0.400.0-2.fc10
changelog:
  - Updated polish translation (bz 310781)
  - Fix error accessing os dictionary in virt-convert
  - Log tracebacks from cli apps
  - Better default connection detection for qemu/kvm
  - Set up virtio for f9 guests (bz 462404)
  - Don't report option collision if using --bridge
  - Update storage pool when looking up volume (bz 465551)


author: Cole Robinson <crobinso@redhat.com> - 0.400.0-4.fc10
changelog:
  - Updated translations (bz 467810)
  - Specific os entry for XP 64 (bz 467851)
  - Disk pool 'dos' format fix


author: Cole Robinson <crobinso@redhat.com> - 0.400.1-1.fc11
changelog:
  - Update to 0.400.1
  - virt-convert virt-image -> vmx support
  - virt-image checksum support
  - Improved URL fetching support (Debian Xen, Ubuntu kernel + boot.iso)


author: Cole Robinson <crobinso@redhat.com> - 0.400.2-1.fc11
changelog:
  - Update to version 0.400.2
  - virt-install --import option for creating a guest from an existing disk
  - virt-install --host-device option for host device passthrough
  - virt-clone --original-xml for cloning from an xml file
  - virt-install --nonetworks option.


author: Cole Robinson <crobinso@redhat.com> - 0.400.3-1.fc11
changelog:
  - Update to bugfix release 0.400.3
  - Fix virt-install --os-type windows installs
  - Fix URL installs to not wipe out --os-variant value


author: Cole Robinson <crobinso@redhat.com> - 0.400.3-2.fc11
changelog:
  - Add spanish translation (bz 480816)
  - Fix calls to libvirt host device detach/reset
  - Fix virt-image with create-on-the-fly disks


author: Cole Robinson <crobinso@redhat.com> - 0.400.3-5.fc11
changelog:
  - Don't set a keymap if user doesn't specify one (bz 487737)
  - Fix adding floppy devices (bz 493408)
  - Updated translations (bz 493944, bz 494358)


author: Cole Robinson <crobinso@redhat.com> - 0.500.0-1.fc12
changelog:
  - Update to version 0.500.0
  - New virt-install device options --serial, --parallel, and --video
  - Allow various auth types for libvirt connections (PolicyKit, SASL, ...)
  - New virt-clone option --auto-clone: generates all needed input.
  - Specify network device model via virt-install --network (Guido Gunther)


author: Cole Robinson <crobinso@redhat.com> - 0.500.0-2.fc12
changelog:
  - Don't erroneously set limit for amount of virtio devices (bz 499654)
  - Don't use virtio for cdrom devices (bz 517151)
  - Auto detect keymapping (bz 487735)


author: Cole Robinson <crobinso@redhat.com> - 0.500.0-3.fc12
changelog:
  - Don't generate bogus disk driver XML.
  - Add '--disk format=' for specifying format (qcow2, ...) when provisioning
  - Add Fedora12 to os dictionary


author: Cole Robinson <crobinso@redhat.com> - 0.500.0-4.fc12
changelog:
  - Don't use usermode net for non-root qemu:///system via virt-install
  - Fix cdrom installs where the iso is a storage volume (bz 524109)
  - Fix path permissions for kernel/initrd download location (bz 523960)


author: Cole Robinson <crobinso@redhat.com> - 0.500.1-1.fc12
changelog:
  - Update to version 0.500.1
  - virt-install now attempts --os-variant detection by default.
  - New --disk option 'format', for creating image formats like qcow2 or vmdk
  - Many improvements and bugfixes


author: Cole Robinson <crobinso@redhat.com> - 0.500.3-1.el6
changelog:
  - Rebase to 0.500.3
  - virt-install: New --watchdog option: configure a virtual watchdog device
  - virt-install: New --soundhw option: More flexible sound configuration
                  deprecates --sound, though back compat is maintained
  - virt-install: New --security option: configure VM security driver settings
  - virt-install: New --description option: set a human readable description
  - Better OS defaults: Use <video> VGA and <sound> AC97 if supported


author: Cole Robinson <crobinso@redhat.com> - 0.500.3-2.el6
changelog:
  - Fix --cdrom with media manually added to pool (bz 574973)
  - Handle commas in security labels (bz 581473)
  - virt-install: Fix --location dvd.iso (bz 587679)


author: Cole Robinson <crobinso@redhat.com> - 0.500.5-1.el6
changelog:
  - Rebase to 0.500.5 (bz 658963)
  - New virt-install --cpu option for configuring CPU model/features
  - virt-install --vcpus option can not specify topology and maxvcpus
  - New virt-install --graphics option to unify --vnc, --sdl, spice config
  - New virt-install --print-xml option to skip install and print XML


author: Cole Robinson <crobinso@redhat.com> - 0.500.5-2.el6
changelog:
  - Fix --check-cpu error message (bz 676995)
  - Fix bogus virt-convert output (bz 678214)
  - virt-install: Fix --print-step typos (bz 683320)
  - Fix parsing domain <features> (bz 683100)
  - virt-convert: Preserve storage format in generated XML (bz 622684)
  - Fix specifying manual spice port (bz 682697)
  - Fix nonsparse disk creation (bz 678374)
  - Properly raise errors when creating storage (bz 683182)
  - Fix using a pool source as storage (bz 589665)
  - Support sound model 'ich6' (bz 683103)
  - Use async IO properly for storage (bz 611205)


author: Cole Robinson <crobinso@redhat.com> - 0.500.5-3.el6
changelog:
  - virt-install: Actually fix --check-cpu error message (bz 676995)
  - virt-install: Actually fix --print-step typos (bz 683320)
  - virt-install: Regenerate man pages for async IO options (bz 611205)


author: Cole Robinson <crobinso@redhat.com> - 0.600.0-1.el6
changelog:
  - Rebased to version 0.600.0
  - virt-install: Various improvements to enable LXC/container guests:
  - New --filesystem option for <filesystem> devices
  - New --init option for container <init> path
  - New --container option (similar to --paravirt or --hvm)
  - virt-install: Make --location  remotely (with latest libvirt)
  - virt-install: New --smartcard option for <smartcard> devices
  - (Marc-André Lureau)
  - virt-install: New --numatune option for building guest <numatune> XML
  - virt-install: option to set --disk error_policy=
  - virt-install: option to set --disk serial=


author: Cole Robinson <crobinso@redhat.com> - 0.600.0-3
changelog:
  - virt-install: Fix --initrd-inject (bz 729643)
  - virt-install: Fix --file-size and --prompt (bz 729608)
  - Fix changing disk bus in virt-manager (bz 728423)
  - virt-install: Fix --cpu with case sensitive CPU model (bz 727986)
  - Fix remote URL installs as root (bz 546440)


author: Cole Robinson <crobinso@redhat.com> - 0.600.0-4
changelog:
  - Add QED volume support (bz 739487)
  - virt-install: Fix --nonetworks (bz 738216)
  - virt-install: Fix --location with qemu:///session (bz 738211)


author: Cole Robinson <crobinso@redhat.com> - 0.600.0-5
changelog:
  - Don't leave host PCI devices in unusable state on hotplug fail (bz
    746355)
  - Configure clock to avoid timer drift for windows (bz 742736)


author: Cole Robinson <crobinso@redhat.com> - 0.600.0-6
changelog:
  - Fix random virt-manager traceback when creating guests (bz 765928)
  - Fix specifying over 26 virtio disks (bz 769191)
  - Fix a japanese translation issue (bz 783866)


author: Cole Robinson <crobinso@redhat.com> - 0.600.0-8
changelog:
  - Use correct MAC prefix when cloning KVM guests (bz 798909)
  - Escape string when setting VM description (bz 741158)


author: Jiri Denemark <jdenemar@redhat.com> - 0.600.0-9
changelog:
  - Add RHEL7 to osdict (rhbz#803631)
  - Allow specifying --security ...relabel=yes|no (rhbz#832339)
  - Fix some issues with relabel= support (rhbz#832339)
  - Add --cpuset=auto test confirming it actually works (rhbz#834495)
  - Don't copy USB bus/address by default from node device (rhbz#820303)
  - Add address element in hostdev xml when the values are present (rhbz#820303)


author: Jiri Denemark <jdenemar@redhat.com> - 0.600.0-14
changelog:
  - setup: rebuild manpages in build phase (rhbz#832339)
  - Remove and ignore build-generated files (rhbz#832339)


author: Jiri Denemark <jdenemar@redhat.com> - 0.600.0-15
changelog:
  - build: One more fix for clean builds (rhbz#832339)
  - Update pod file from latest pod.in (rhbz#832339)


author: Martin Kletzander <mkletzan@redhat.com> - 0.600.0-16
changelog:
  - Fix changing cirrus to QXL for active VM (rhbz#980334)
  - Support incomplete .treeinfo files (rhbz#954262)
  - Don't support sparse logical volumes (rhbz#921480)
  - Fix progress bar output bug in virt-clone (rhbz#946972)
  - Add Debian Wheezy to the OS_TYPES (rhbz#958496)
  - add mageia to the list of supported distribution (rhbz#958496)
  - osdict: Add some opensuse entries (rhbz#958496)
  - osdict: Add f17 tweak some supported distros (rhbz#958496)
  - osdict: hmm actually add f17 (rhbz#958496)
  - virtinst: Add latest Ubuntu releases (rhbz#958496)
  - osdict: Add Fedora 18 (rhbz#958496)


author: Martin Kletzander <mkletzan@redhat.com> - 0.600.0-18
changelog:
  - Don't support comments in parsed parameters (rhbz#916875)
  - Fix progress bars in virt-clone once more (rhbz#946972)
  - Throw error when --host-device can't specify unique device (rhbz#861972)
  - Set is_dup to true when --host-device come with bus.addr (rhbz#861972)
  - Differentiate duplicate usb devices by bus/addr (rhbz#861972)


author: Giuseppe Scrivano <gscrivan@redhat.com> - 0.600.0-19
changelog:
  - Document correctly the feature state attribute.  (rhbz#1024700)
  - Remove qcow from the virt-image 5 manual. (rhbz#1024180)
  - Fix typo in virt-install manual. (rhbz#1024151)
  - Update the os-variant list of virt-install. (rhbz#1011290)
  - Show an error when the allocation of new lvm volume set as 0 (rhbz#1000980)
  - virt-install honours sparse=false (rhbz#873545)
  - virt-install supports macvtap (rhbz#855740)
  - virt-install creates the spicevmc channel with "--graphics spice" (rhbz#853386)
  - fix cloning of LVM volumes (rhbz#1055225)
  - Graphics display type sdl removed from virt-install manual (rhbz#886779)
  - USB Redirection device options in virt-install (rhbz#1001999)
  - Specify 'startupPolicy' during virt-install (rhbz#1017423)
  - virt-manager displays domain for PCI device (rhbz#1085499)
  - Introduce device type 'lun' (rhbz#1077232)
  - Add Virtio SCSI disk option (rhbz#1049781)


author: Giuseppe Scrivano <gscrivan@redhat.com> - 0.600.0-21
changelog:
  - Correctly check for the SPICEVMC support on RHEL (rhbz#853386)
  - Enforce non sparse logical volumes when cloning (rhbz#1055225)
  - doc: add "lun" to the Disk device type list for virt-install (rhbz#1077232)


author: Giuseppe Scrivano <gscrivan@redhat.com> - 0.600.0-25
changelog:
  - When --cpu-host is specified use cpu-mode host-model (rhbz#1167072)
  - Do not fail when using a non sparse logical volume (rhbz#1167998)
  - Fix bridge interface creation (rhbz#1172407)


author: Miloslav Trmač <mitr@redhat.com> - 0.3.1-4
changelog:
  - Clarify documentation about which block device to use as an argument
    Resolves: #636541
  - Report readable error messages instead of random characters in some cases
    Resolves: #638732
  - Make passphrase prompts interruptable, report incorrect passphrases
    Resolves: #641111
  - Ask for passphrases only after checking for easily detectable problems
    Resolves: #643897


author: Luke Macken <lmacken@redhat.com> - 0.9-3
changelog:
  - Add python-{paste,pygments,tempita,simplejson} to the BuildRequires
  - Add python-{tempita,pygments,simplejson} to the Requires


author: Jan Pokorny <jpokorny@redhat.com> - 0.10.2-2
changelog:
  - Fix immediate error in hash_identifier in case of FIPS mode
  Resolves: rhbz#746118
  Related:  rhbz#956360


author: Kyle VanderBeek <kylev@kylev.com> - 0.3.4-2
changelog:
  - Fix rpmlint warnings.
  - Add documentation to the package.
  - Fix spurious executable bit on CHANGELOG.


author: Ricky Zhou <ricky@fedoraproject.org> 0.9.2-1
changelog:
  - Upstream released new version.
  - Rename to python-webob, as mentioned in the Python package naming
    guidelines.
  - Clean up spec.
  - Add %check section.


author: Paul Howarth <paul@city-fan.org> 3.0.1-5
changelog:
  - dispense with %{pybasever} macro and python-abi dependency, not needed from
    FC4 onwards
  - include ZPL 2.1 license text
  - add reference in %description to origin of patch
  - change License: tag from "ZPL 2.1" to "Zope Public License" to shut rpmlint up


author: Paul Howarth <paul@city-fan.org> 3.0.1-9
changelog:
  - tweak %files list to pull in egg info file when necessary
  - fix permissions on shared objects (silence rpmlint)


author: Paul Howarth <paul@city-fan.org> 3.3.0-1
changelog:
  - update to 3.3.0
  - update source URL to include versioned directory and new tarball name
  - drop the gcc 4.x compatibility patch, no longer needed
  - don't run the test suite as it now depends on zope.testing
  - exclude _zope_interface_coptimizations.c source from the binary package


author: Paul Howarth <paul@city-fan.org> 3.4.1-1
changelog:
  - update to 3.4.1
  - incorporate suggestions from Felix Schwarz:
    - new summary and description
    - new upstream URL (old one out of date)
    - don't package test files
    - include more documentation


author: David Nalley <david@gnsa.us> 0.7.0-2
changelog:
  - Added some verbiage regarding what WBEM is and expanding WBEM and CIM acronyms
  - Added python-twisted as a dependency


author: Patrice Dumas <pertusus@free.fr> - 0.15-5
changelog:
  - remove requires for python-abi (automatic now) and python directory
  - remove package name from summary
  - change tabs to spaces


author: Michael Fulbright <msf@redhat.com> 0.3.4-1
changelog:
  - remove code in xf86config.py:createTemplate() that inserted a Display
    section.  We want user to supply this and it shouldnt be in template.


author: Brent Fox <bfox@redhat.com> 0.3.10-1
changelog:
  - add a BuildRequires for python-devel
  - add an options attribute to the server layout section (for Xinerama)


author: Brent Fox <bfox@redhat.com> 0.3.15-1
changelog:
  - remove the setupMice() function createTemplate() 
  - because the 2.6 kernel puts both PS/2 and USB mice on the same device


author: Mike A. Harris <mharris@redhat.com> - 0.3.18-1
changelog:
  - Do not write out XkbRules line to config file, as it is unnecessary hard
    coding the rules file, which has a built in default which should always
    work. (#120858)


author: Jeremy Katz <katzj@redhat.com> - 0.3.20-1
changelog:
  - the X server compiles in the path for rgb.txt, so don't explicitly list 
    (fixes for the path move with modular X)
  - get rid of no longer needed %preun
  - modular X buildrequires changes


author: Mike A. Harris <mharris@redhat.com> 0.3.27-2.fc6
changelog:
  - Remove dependency on xorg-x11-server-sdk, and replace it with correct dep
    on "libxf86config-devel >= 1.1.1-7", and rebuild in order to pick up
    necessary fixes in the static library.
  - Use Fedora Extras style BuildRoot tag.
  - Use {?dist} tag in Release


author: Adam Jackson <ajax@redhat.com> 0.3.31-3
changelog:
  - Update libxf86config-devel BR to a sufficiently new version to not print the
    "Comment all HorizSync and VertSync values to use DDC" message, and
    rebuild.  (#216288)


author: Adam Jackson <ajax@redhat.com> 0.3.34-1
changelog:
  - pyxf86config 0.3.34
  - License is GPLv2
  - Bump libxf86config-devel buildreq to pick up symbol visibility tweak


author: Ralph Apel <r.apel at r-apel.de> 0:1.5-3jpp
changelog:
  - Add option to build without maven
  - Omit tests when building without maven
  - Add gcj_support option


author: Ralph Apel <r.apel at r-apel.de> 0:1.6.2-1jpp
changelog:
  - Upgrade to 1.6.2
  - Activate tests while building with ant
  - Make Vendor, Distribution based on macro
  - Install depmap frags, poms


author: Ralph Apel <r.apel at r-apel.de> 0:1.6.3-3jpp
changelog:
  - Add settings file
  - Fix pom marking jmock dependency as of scope test
  - Fix -jpp-depmap.xml for asm2-parent


author: Eduardo Habkost <ehabkost@redhat.com> - qemu-kvm-0.12.1.2-2.4.el6
changelog:
  - kvm-virtio-Remove-duplicate-macro-definition-for-max.-vi.patch [bz#543825]
  - kvm-virtio-console-qdev-conversion-new-virtio-serial-bus.patch [bz#543825]
  - kvm-virtio-serial-bus-Maintain-guest-and-host-port-open-.patch [bz#543825]
  - kvm-virtio-serial-bus-Add-a-port-name-property-for-port-.patch [bz#543825]
  - kvm-virtio-serial-bus-Add-support-for-buffering-guest-ou.patch [bz#543825]
  - kvm-virtio-serial-bus-Add-ability-to-hot-unplug-ports.patch [bz#543825]
  - kvm-virtio-serial-Add-a-virtserialport-device-for-generi.patch [bz#543825]
  - kvm-Move-virtio-serial-to-Makefile.hw.patch [bz#543825]
  - Resolves: bz#543825
    ([RFE] Backport virtio-serial device to qemu)


author: Eduardo Habkost <ehabkost@redhat.com> - qemu-kvm-0.12.1.2-2.5.el6
changelog:
  - Remove unneeded/unsupported features: [bz#555336]
    - make default options explicit
    - remove sdl support
    - remove sb16 emulation
    - remove oss support
    - remove curses support
    - disable curl support
    - disable bluez support
    - enable -Werror
    - limit block drivers support
    - add host_cdrom block device
  - Resolves: bz#555336
    (Remove unneeded features)


author: Eduardo Habkost <ehabkost@redhat.com> - qemu-kvm-0.12.1.2-2.9.el6
changelog:
  - Disable -Werror again, as there are still warnings on the build
  - Related: bz#555336
    (Remove unneeded features)


author: Eduardo Habkost <ehabkost@redhat.com> - qemu-kvm-0.12.1.2-2.11.el6
changelog:
  - kvm-block-Introduce-BDRV_O_NO_BACKING.patch [bz#556459]
  - kvm-block-Add-bdrv_change_backing_file.patch [bz#556459]
  - kvm-qemu-img-rebase.patch [bz#556459]
  - Resolves: bz#556459
    (RFE - In-place backing file format change)


author: Eduardo Habkost <ehabkost@redhat.com> - qemu-kvm-0.12.1.2-2.12.el6
changelog:
  - kvm-virtio-serial-bus-Remove-guest-buffer-caching-and-th.patch [bz#543825]
  - kvm-virtio-serial-Make-sure-we-don-t-crash-when-host-por.patch [bz#543825]
  - kvm-virtio-serial-Use-MSI-vectors-for-port-virtqueues.patch [bz#543825]
  - kvm-virtio-serial-bus-Match-upstream-whitespace.patch [bz#543825]
  - Resolves: bz#543825
    ([RFE] Backport virtio-serial device to qemu)


author: Eduardo Habkost <ehabkost@redhat.com> - qemu-kvm-0.12.1.2-2.13.el6
changelog:
  - kvm-reduce-number-of-reinjects-on-ACK.patch [bz#557435]
  - kvm-Add-missing-newline-at-the-end-of-options-list.patch [bz#558412]
  - kvm-vnc-Fix-artifacts-in-hextile-decoding.patch [bz#558414]
  - kvm-QMP-Drop-wrong-assert.patch [bz#558415]
  - kvm-vmware_vga-Check-cursor-dimensions-passed-from-guest.patch [bz#558435]
  - kvm-virtio-pci-thinko-fix.patch [bz#558438]
  - kvm-QMP-Don-t-free-async-event-s-data.patch [bz#558465]
  - kvm-vnc_refresh-return-if-vd-timer-is-NULL.patch [bz#558466]
  - kvm-osdep.c-Fix-accept4-fallback.patch [bz#558477]
  - kvm-QMP-Emit-asynchronous-events-on-all-QMP-monitors.patch [bz#558619]
  - kvm-vnc_refresh-calling-vnc_update_client-might-free-vs.patch [bz#558846]
  - Resolves: bz#557435
    (KVM: WIN7-32bit blue screen (IMAGE_NAME:  ntkrnlmp.exe).)
  - Resolves: bz#558412
    (-help output not terminated by newline)
  - Resolves: bz#558414
    (Artifacts in hextile decoding)
  - Resolves: bz#558415
    (Assert triggers on qmp commands returning lists)
  - Resolves: bz#558435
    (vmware-svga buffer overflow copying cursor data)
  - Resolves: bz#558438
    (virtio status bits corrupted if guest deasserts bus mastering bit)
  - Resolves: bz#558465
    (Double-free of qmp async messages)
  - Resolves: bz#558466
    (Possible segfault on vnc client disconnect)
  - Resolves: bz#558477
    (Incorrect handling of EINVAL from accept4())
  - Resolves: bz#558619
    (QMP: Emit asynchronous events on all QMP monitors)
  - Resolves: bz#558846
    (fix use-after-free in vnc code)


author: Glauber Costa <glommer@redhat.com> - qemu-kvm-0.12.1.2-2.14.el6
changelog:
  - kvm-MCE-Fix-bug-of-IA32_MCG_STATUS-after-system-reset.patch [bz#558416]
  - kvm-Fix-CPU-topology-initialization.patch [bz#558432]
  - kvm-loader-more-ignores-for-rom-intended-to-be-loaded-by.patch [bz#558467]
  - kvm-pc-add-machine-type-for-0.12.patch [bz#558470]
  - kvm-virtio-console-Rename-virtio-serial.c-back-to-virtio.patch [bz#559089]
  - kvm-virtio-serial-bus-Fix-bus-initialisation-and-allow-f.patch [bz#559503]
  - Resolves: bz#558416
    (Machine check exception injected into qemu reinjected after every reset)
  - Resolves: bz#558432
    (CPU topology not taking effect)
  - Resolves: bz#558467
    (roms potentially loaded twice)
  - Resolves: bz#558470
    (Incorrect machine types)
  - Resolves: bz#559089
    (Rename virtio-serial.c to virtio-console.c as is upstream.)
  - Resolves: bz#559503
    (virtio-serial: fix multiple devices intialisation)


author: Eduardo Habkost <ehabkost@redhat.com> - qemu-kvm-0.12.1.2-2.15.el6
changelog:
  - kvm-VNC-Use-enabled-key-instead-of-status.patch [bz#549759]
  - kvm-VNC-Make-auth-key-mandatory.patch [bz#549759]
  - kvm-VNC-Rename-client-s-username-key.patch [bz#549759]
  - kvm-VNC-Add-family-key.patch [bz#549759]
  - kvm-VNC-Cache-client-info-at-connection-time.patch [bz#549759]
  - kvm-QMP-Introduce-VNC_CONNECTED-event.patch [bz#549759]
  - kvm-QMP-Introduce-VNC_DISCONNECTED-event.patch [bz#549759]
  - kvm-QMP-Introduce-VNC_INITIALIZED-event.patch [bz#549759]
  - kvm-block-avoid-creating-too-large-iovecs-in-multiwrite_.patch [bz#558730]
  - Resolves: bz#549759
    (A QMP event notification on VNC client connect/disconnect events)
  - Resolves: bz#558730
    (qemu may create too large iovecs for the kernel)


author: Eduardo Habkost <ehabkost@redhat.com> - qemu-kvm-0.12.1.2-2.17.el6
changelog:
  - kvm-Fix-QEMU_WARN_UNUSED_RESULT.patch [bz#560623]
  - kvm-qcow2-Fix-error-handling-in-qcow2_grow_l1_table.patch [bz#560623]
  - kvm-qcow2-Fix-error-handling-in-qcow_save_vmstate.patch [bz#560623]
  - kvm-qcow2-Return-0-errno-in-get_cluster_table.patch [bz#560623]
  - kvm-qcow2-Return-0-errno-in-qcow2_alloc_cluster_offset.patch [bz#560623]
  - kvm-block-Return-original-error-codes-in-bdrv_pread-writ.patch [bz#560623]
  - kvm-qcow2-Fix-error-handling-in-grow_refcount_table.patch [bz#560623]
  - kvm-qcow2-Improve-error-handling-in-update_refcount.patch [bz#560623]
  - kvm-qcow2-Allow-updating-no-refcounts.patch [bz#560623]
  - kvm-qcow2-Don-t-ignore-update_refcount-return-value.patch [bz#560623]
  - kvm-qcow2-Don-t-ignore-qcow2_alloc_clusters-return-value.patch [bz#560623]
  - kvm-net-Make-inet_strfamily-public.patch [bz#562181]
  - kvm-net-inet_strfamily-Better-unknown-family-report.patch [bz#562181]
  - kvm-vnc-Use-inet_strfamily.patch [bz#562181]
  - Resolves: bz#560623
    (error codes aren't always propagated up through the block layer (e.g. -ENOSPC))
  - Resolves: bz#562181
    (Small VNC related cleanup)


author: Eduardo Habkost <ehabkost@redhat.com> - qemu-kvm-0.12.1.2-2.18.el6
changelog:
  - kvm-roms-minor-fixes-and-cleanups.patch [bz#558818]
  - kvm-fw_cfg-rom-loader-tweaks.patch [bz#558818]
  - kvm-roms-rework-rom-loading-via-fw.patch [bz#558818]
  - kvm-pci-allow-loading-roms-via-fw_cfg.patch [bz#558818]
  - kvm-pc-add-rombar-to-compat-properties-for-pc-0.10-and-p.patch [bz#558818]
  - Resolves: bz#558818
    (rom loading)


author: Glauber Costa <glommer@redhat.com> - qemu-kvm-0.12.1.2-2.19.el6
changelog:
  - kvm-virtio_blk-Factor-virtio_blk_handle_request-out.patch [bz#560942]
  - kvm-virtio-blk-Fix-restart-after-read-error.patch [bz#560942]
  - kvm-virtio-blk-Fix-error-cases-which-ignored-rerror-werr.patch [bz#560942]
  - Resolves: bz#560942
    (virtio-blk error handling doesn't work reliably)


author: Glauber Costa <glommer@redhat.com> - qemu-kvm-0.12.1.2-2.20.el6
changelog:
  - kvm-QMP-Add-QEMU-s-version-to-the-greeting-message.patch [bz#557930]
  - kvm-QMP-Introduce-the-qmp_capabilities-command.patch [bz#557930]
  - kvm-QMP-Enforce-capability-negotiation-rules.patch [bz#557930]
  - kvm-QMP-spec-Capability-negotiation-updates.patch [bz#557930]
  - kvm-json-escape-u0000-.-u001F-when-outputting-json.patch [bz#559667]
  - kvm-json-fix-PRId64-on-Win32.patch [bz#563878]
  - kvm-qjson-Improve-debugging.patch [bz#563875]
  - kvm-Monitor-remove-unneeded-checks.patch [bz#563876]
  - kvm-QError-Don-t-abort-on-multiple-faults.patch [bz#559635]
  - kvm-QMP-Don-t-leak-on-connection-close.patch [bz#559645]
  - kvm-QMP-Emit-Basic-events.patch [bz#558623]
  - Resolves: bz#557930
    (QMP: Feature Negotiation support)
  - Resolves: bz#558623
    (QMP: Basic async events are not emitted)
  - Resolves: bz#559635
    (QMP: assertion on multiple faults)
  - Resolves: bz#559645
    (QMP: leak when a QMP connection is closed)
  - Resolves: bz#559667
    (QMP: JSON parser doesn't escape some control chars)
  - Resolves: bz#563875
    (QJSON: Improve debugging)
  - Resolves: bz#563876
    (Monitor: remove unneeded checks)
  - Resolves: bz#563878
    (QJSON: Fix PRId64 handling)


author: Glauber Costa <glommer@redhat.com> - qemu-kvm-0.12.1.2-2.21.el6
changelog:
  - kvm-net-add-API-to-disable-enable-polling.patch [bz#562958]
  - kvm-virtio-rename-features-guest_features.patch [bz#562958]
  - kvm-qdev-add-bit-property-type.patch [bz#562958]
  - kvm-qdev-fix-thinko-leading-to-guest-crashes.patch [bz#562958]
  - kvm-virtio-add-features-as-qdev-properties-fixup.patch [bz#562958]
  - Resolves: bz#562958
    (RFE: Support vhost net mode)


author: Glauber Costa <glommer@redhat.com> - qemu-kvm-0.12.1.2-2.22.el6
changelog:
  - kvm-QMP-BLOCK_IO_ERROR-event-handling.patch [bz#547501]
  - kvm-block-BLOCK_IO_ERROR-QMP-event.patch [bz#547501]
  - kvm-ide-Generate-BLOCK_IO_ERROR-QMP-event.patch [bz#547501]
  - kvm-scsi-Generate-BLOCK_IO_ERROR-QMP-event.patch [bz#547501]
  - kvm-virtio-blk-Generate-BLOCK_IO_ERROR-QMP-event.patch [bz#547501]
  - kvm-add-rhel-machine-types.patch [bz#558838]
  - kvm-QMP-Fix-query-balloon-key-change.patch [bz#568739]
  - Resolves: bz#547501
    (RFE: a QMP event notification for disk  I/O errors with werror/rerror flags)
  - Resolves: bz#558838
    (add rhel machine types)
  - Resolves: bz#568739
    (QMP: Fix 'query-balloon' key)


author: Glauber Costa <glommer@redhat.com> - qemu-kvm-0.12.1.2-2.23.el6
changelog:
  - kvm-ide-device-version-property.patch [bz#558835]
  - kvm-pc-add-driver-version-compat-properties.patch [bz#558835]
  - kvm-qemu-img-Fix-segfault-during-rebase.patch [bz#567602]
  - Resolves: bz#558835
    (ide/scsi drive versions)
  - Resolves: bz#567602
    (qemu-img rebase subcommand got Segmentation fault)


author: Eduardo Habkost <ehabkost@redhat.com> - qemu-kvm-0.12.1.2-2.24.el6
changelog:
  - kvm-path.c-fix-warning-with-_FORTIFY_SOURCE.patch [bz#567099]
  - kvm-hw-pc.c-fix-warnings-with-_FORTIFY_SOURCE.patch [bz#567099]
  - kvm-slirp-misc.c-fix-warning-with-_FORTIFY_SOURCE.patch [bz#567099]
  - kvm-savevm.c-fix-warning-with-_FORTIFY_SOURCE.patch [bz#567099]
  - kvm-block-bochs.c-fix-warning-with-_FORTIFY_SOURCE.patch [bz#567099]
  - kvm-block.c-fix-warning-with-_FORTIFY_SOURCE.patch [bz#567099]
  - kvm-Introduce-qemu_write_full.patch [bz#567099]
  - kvm-force-to-test-result-for-qemu_write_full.patch [bz#567099]
  - kvm-block-cow.c-fix-warnings-with-_FORTIFY_SOURCE.patch [bz#567099]
  - kvm-block-qcow.c-fix-warnings-with-_FORTIFY_SOURCE.patch [bz#567099]
  - kvm-block-vmdk.o-fix-warnings-with-_FORTIFY_SOURCE.patch [bz#567099]
  - kvm-block-vvfat.c-fix-warnings-with-_FORTIFY_SOURCE.patch [bz#567099]
  - kvm-block-qcow2.c-fix-warnings-with-_FORTIFY_SOURCE.patch [bz#567099]
  - kvm-net-slirp.c-fix-warning-with-_FORTIFY_SOURCE.patch [bz#567099]
  - kvm-usb-linux.c-fix-warning-with-_FORTIFY_SOURCE.patch [bz#567099]
  - kvm-vl.c-fix-warning-with-_FORTIFY_SOURCE.patch [bz#567099]
  - kvm-monitor.c-fix-warnings-with-_FORTIFY_SOURCE.patch [bz#567099]
  - kvm-linux-user-mmap.c-fix-warnings-with-_FORTIFY_SOURCE.patch [bz#567099]
  - kvm-check-pipe-return-value.patch [bz#567099]
  - kvm-fix-qemu-kvm-_FORTIFY_SOURCE-compilation.patch [bz#567099]
  - kvm-Enable-_FORTIFY_SOURCE-2.patch [bz#567099]
  - kvm-qcow2-Fix-image-creation-regression.patch [bz#567099]
  - kvm-cow-return-errno-instead-of-1.patch [bz#567099]
  - kvm-slirp-check-system-success.patch [bz#567099]
  - kvm-qcow2-return-errno-instead-of-1.patch [bz#567099]
  - kvm-qcow-return-errno-instead-of-1.patch [bz#567099]
  - kvm-vmdk-return-errno-instead-of-1.patch [bz#567099]
  - kvm-vmdk-make-vmdk_snapshot_create-return-errno.patch [bz#567099]
  - kvm-vmdk-fix-double-free.patch [bz#567099]
  - kvm-vmdk-share-cleanup-code.patch [bz#567099]
  - kvm-block-print-errno-on-error.patch [bz#567099]
  - kvm-documentation-qemu_write_full-don-t-work-with-non-bl.patch [bz#567099]
  - kvm-virtio-serial-pci-Allow-MSI-to-be-disabled.patch [bz#567035]
  - kvm-pc-Add-backward-compatibility-options-for-virtio-ser.patch [bz#567035]
  - kvm-virtio-serial-don-t-set-MULTIPORT-for-1-port-dev.patch [bz#567035]
  - kvm-qdev-Add-a-DEV_NVECTORS_UNSPECIFIED-enum-for-unspeci.patch [bz#567035]
  - kvm-virtio-pci-Use-DEV_NVECTORS_UNSPECIFIED-instead-of-1.patch [bz#567035]
  - kvm-kbd-leds-infrastructure.patch [bz#569767]
  - kvm-kbd-leds-ps-2-kbd.patch [bz#569767]
  - kvm-kbd-leds-usb-kbd.patch [bz#569767]
  - kvm-kbd-keds-vnc.patch [bz#569767]
  - kvm-migration-Clear-fd-also-in-error-cases.patch [bz#570174]
  - Resolves: bz#567035
    (Backport changes for virtio-serial from upstream: disabling MSI, backward compat.)
  - Resolves: bz#567099
    (Allow _FORTIFY_SOURCE=2 & --enable-warning)
  - Resolves: bz#569767
    (Caps Lock the key's appearance  of guest is not synchronous as host's --view kvm with vnc)
  - Resolves: bz#570174
    (Restoring a qemu guest from a saved state file using -incoming sometimes fails and hangs)


author: Eduardo Habkost <ehabkost@redhat.com> - qemu-kvm-0.12.1.2-2.25.el6
changelog:
  - kvm-qemu-memory-notifiers.patch [bz#562958]
  - kvm-tap-add-interface-to-get-device-fd.patch [bz#562958]
  - kvm-add-API-to-set-ioeventfd.patch [bz#562958]
  - kvm-notifier-event-notifier-implementation.patch [bz#562958]
  - kvm-virtio-add-notifier-support.patch [bz#562958]
  - kvm-virtio-add-APIs-for-queue-fields.patch [bz#562958]
  - kvm-virtio-add-set_status-callback.patch [bz#562958]
  - kvm-virtio-move-typedef-to-qemu-common.patch [bz#562958]
  - kvm-virtio-pci-fill-in-notifier-support.patch [bz#562958]
  - kvm-vhost-vhost-net-support.patch [bz#562958]
  - kvm-tap-add-vhost-vhostfd-options.patch [bz#562958]
  - kvm-tap-add-API-to-retrieve-vhost-net-header.patch [bz#562958]
  - kvm-virtio-net-vhost-net-support.patch [bz#562958]
  - kvm-qemu-kvm-add-vhost.h-header.patch [bz#562958]
  - kvm-irqfd-support.patch [bz#562958]
  - kvm-msix-add-mask-unmask-notifiers.patch [bz#562958]
  - kvm-virtio-pci-irqfd-support.patch [bz#562958]
  - Resolves: bz#562958
    (RFE: Support vhost net mode)


author: Eduardo Habkost <ehabkost@redhat.com> - qemu-kvm-0.12.1.2-2.26.el6
changelog:
  - kvm-add-spice-into-the-configure-file.patch [bz#549757]
  - kvm-spice-core-bits.patch [bz#549757]
  - kvm-spice-add-keyboard.patch [bz#549757]
  - kvm-spice-add-mouse.patch [bz#549757]
  - kvm-spice-simple-display.patch [bz#549757]
  - kvm-move-x509-file-name-defines-to-qemu-x509.h.patch [bz#549757]
  - kvm-spice-tls-support.patch [bz#549757]
  - kvm-spice-configure-listening-addr.patch [bz#549757]
  - kvm-spice-add-qxl-device.patch [bz#549757]
  - Resolves: bz#549757
    (Provide SPICE support  / -spice command line argument)


author: Eduardo Habkost <ehabkost@redhat.com> - qemu-kvm-0.12.1.2-2.27.el6
changelog:
  - kvm-spice-add-tablet.patch [bz#574211]
  - kvm-spice-simple-display-wake-spice-server-only-when-idl.patch [bz#574212]
  - kvm-spice-qxl-switch-back-to-vga-mode-on-register-access.patch [bz#574214]
  - kvm-spice-qxl-ring-access-security-fix.patch [bz#568820]
  - kvm-vnc-support-password-expire.patch [bz#525935]
  - kvm-spice-vnc-add-__com.redhat_set_password-monitor-comm.patch [bz#525935]
  - kvm-spice-add-audio-support.patch [bz#574222]
  - kvm-spice-make-image-compression-configurable.patch [bz#574225]
  - kvm-spice-configure-channel-security.patch [bz#574225]
  - kvm-spice-configure-renderer.patch [bz#574225]
  - kvm-spice-send-connect-disconnect-monitor-events.patch [bz#558957]
  - kvm-spice-qxl-update-vga-help-text-indicating-qxl-is-the.patch [bz#574853]
  - kvm-spice-notifying-spice-when-migration-starts-and-ends.patch [bz#574849]
  - kvm-spice-add-__com.redhat_spice_migrate_info-monitor-co.patch [bz#574849]
  - Resolves: bz#525935
    (RFE: expire vnc password)
  - Resolves: bz#558957
    (A QMP event notification on SPICE client connect/disconnect events)
  - Resolves: bz#568820
    (EMBARGOED CVE-2010-0431 qemu: Insufficient guest provided pointers validation [rhel-6.0])
  - Resolves: bz#574211
    (spice: add tablet support)
  - Resolves: bz#574212
    (spice:wake spice server only when idle)
  - Resolves: bz#574214
    (qxl: switch qxl from native into vga mode on vga register access)
  - Resolves: bz#574222
    (spice: add audio support)
  - Resolves: bz#574225
    (spice: add config options)
  - Resolves: bz#574849
    (spice: client migration support)
  - Resolves: bz#574853
    (spice/qxl: add qxl to -vga help text)


author: Eduardo Habkost <ehabkost@redhat.com> - qemu-kvm-0.12.1.2-2.28.el6
changelog:
  - kvm-qcow2-Factor-next_refcount_table_size-out.patch [bz#567940]
  - kvm-qcow2-Rewrite-alloc_refcount_block-grow_refcount_tab.patch [bz#567940]
  - kvm-qcow2-More-checks-for-qemu-img-check.patch [bz#567940]
  - kvm-spice-virtual-machine-channel-replacement-for-remove.patch [bz#576488]
  - Resolves: bz#567940
    (qcow2 corruption with I/O error during refcount block allocation)
  - Resolves: bz#576488
    (Spice: virtio serial based device for guest-spice client communication)


author: Eduardo Habkost <ehabkost@redhat.com> - qemu-kvm-0.12.1.2-2.29.el6
changelog:
  - kvm-scsi-device-version-property.patch [bz#558835]
  - kvm-scsi-disk-fix-buffer-overflow.patch [bz#558835]
  - Resolves: bz#558835
    (ide/scsi drive versions)


author: Eduardo Habkost <ehabkost@redhat.com> - qemu-kvm-0.12.1.2-2.30.el6
changelog:
  - kvm-New-API-for-asynchronous-monitor-commands.patch [bz#574939]
  - kvm-Revert-QMP-Fix-query-balloon-key-change.patch [bz#574939]
  - kvm-virtio-Add-memory-statistics-reporting-to-the-balloo.patch [bz#574939]
  - Resolves: bz#574939
    (Memory statistics support)


author: Eduardo Habkost <ehabkost@redhat.com> - qemu-kvm-0.12.1.2-2.31.el6
changelog:
  - kvm-Transparent-Hugepage-Support-3.patch [bz#574525]
  - kvm-monitor-Don-t-check-for-mon_get_cpu-failure.patch [bz#574642]
  - kvm-QError-New-QERR_OPEN_FILE_FAILED.patch [bz#574642]
  - kvm-monitor-convert-do_memory_save-to-QError.patch [bz#574642]
  - kvm-monitor-convert-do_physical_memory_save-to-QError.patch [bz#574642]
  - kvm-QError-New-QERR_INVALID_CPU_INDEX.patch [bz#574642]
  - kvm-monitor-convert-do_cpu_set-to-QObject-QError.patch [bz#574642]
  - kvm-monitor-Use-QERR_INVALID_PARAMETER-instead-of-QERR_I.patch [bz#575800]
  - kvm-Revert-QError-New-QERR_INVALID_CPU_INDEX.patch [bz#575800]
  - kvm-json-parser-Fix-segfault-on-malformed-input.patch [bz#575800]
  - kvm-fix-i-format-handling-in-memory-dump.patch [bz#575800]
  - kvm-Don-t-set-default-monitor-when-there-is-a-mux-ed-one.patch [bz#575800]
  - kvm-monitor-Document-argument-type-M.patch [bz#575821]
  - kvm-QDict-New-qdict_get_double.patch [bz#575821]
  - kvm-monitor-New-argument-type-b.patch [bz#575821]
  - kvm-monitor-Use-argument-type-b-for-migrate_set_speed.patch [bz#575821]
  - kvm-monitor-convert-do_migrate_set_speed-to-QObject.patch [bz#575821]
  - kvm-monitor-New-argument-type-T.patch [bz#575821]
  - kvm-monitor-Use-argument-type-T-for-migrate_set_downtime.patch [bz#575821]
  - kvm-monitor-convert-do_migrate_set_downtime-to-QObject.patch [bz#575821]
  - kvm-block-Emit-BLOCK_IO_ERROR-before-vm_stop-call.patch [bz#575912]
  - kvm-QMP-Move-STOP-event-into-do_vm_stop.patch [bz#575912]
  - kvm-QMP-Move-RESET-event-into-qemu_system_reset.patch [bz#575912]
  - kvm-QMP-Sync-with-upstream-event-changes.patch [bz#575912]
  - kvm-QMP-Drop-DEBUG-event.patch [bz#575912]
  - kvm-QMP-Revamp-the-qmp-events.txt-file.patch [bz#575912]
  - kvm-QMP-Introduce-RTC_CHANGE-event.patch [bz#547534]
  - kvm-QMP-Introduce-WATCHDOG-event.patch [bz#557083]
  - kvm-spice-add-more-config-options.patch [bz#576561]
  - Resolves: bz#547534
    (RFE: a QMP event notification for RTC clock changes)
  - Resolves: bz#557083
    (QMP events for watchdog events)
  - Resolves: bz#574525
    (Align qemu-kvm guest memory for transparent hugepage support)
  - Resolves: bz#574642
    (QMP: Convert do_cpu_set() to QObject)
  - Resolves: bz#575800
    (Monitor: Backport a collection of fixes)
  - Resolves: bz#575821
    (QMP: Convert migrate_set_speed, migrate_set_downtime to QObject)
  - Resolves: bz#575912
    (QMP: Backport event related fixes)
  - Resolves: bz#576561
    (spice: add more config options)


author: Eduardo Habkost <ehabkost@redhat.com> - qemu-kvm-0.12.1.2-2.32.el6
changelog:
  - kvm-Revert-spice-add-more-config-options.patch [bz#576561]
    (need to wait for spice patches to be included on spice-server)
  - Related: bz#576561
    (spice: add more config options)


author: Eduardo Habkost <ehabkost@redhat.com> - qemu-kvm-0.12.1.2-2.33.el6
changelog:
  - kvm-Fix-kvm_load_mpstate-for-vcpu-hot-add.patch [bz#569613]
  - kvm-qemu-kvm-enable-get-set-vcpu-events-on-reset-and-mig.patch [bz#569613]
  - kvm-Synchronize-kvm-headers.patch [bz#569613]
  - kvm-Increase-VNC_MAX_WIDTH.patch [bz#569613]
  - kvm-device-assignment-default-requires-IOMMU.patch [bz#569613]
  - kvm-Do-not-allow-vcpu-stop-with-in-progress-PIO.patch [bz#569613]
  - kvm-fix-savevm-command-without-id-or-tag.patch [bz#569613]
  - kvm-Do-not-ignore-error-if-open-file-failed-serial-dev-t.patch [bz#569613]
  - kvm-segfault-due-to-buffer-overrun-in-usb-serial.patch [bz#569613]
  - kvm-fix-inet_parse-typo.patch [bz#569613]
  - kvm-virtio-net-fix-network-stall-under-load.patch [bz#569613]
  - kvm-don-t-dereference-NULL-after-failed-strdup.patch [bz#569613]
  - kvm-net-Remove-unused-net_client_uninit.patch [bz#569613]
  - kvm-net-net_check_clients-runs-too-early-to-see-device-f.patch [bz#569613]
  - kvm-net-Fix-bogus-Warning-vlan-0-with-no-nics-with-devic.patch [bz#569613]
  - kvm-net-net_check_clients-checks-only-VLAN-clients-fix.patch [bz#569613]
  - kvm-net-info-network-shows-only-VLAN-clients-fix.patch [bz#569613]
  - kvm-net-Monitor-command-set_link-finds-only-VLAN-clients.patch [bz#569613]
  - kvm-ide-save-restore-pio-atapi-cmd-transfer-fields-and-i.patch [bz#569613]
  - kvm-cirrus-Properly-re-register-cirrus_linear_io_addr-on.patch [bz#569613]
  - Related: bz#569613
    (backport qemu-kvm-0.12.3 fixes to RHEL6)


author: Eduardo Habkost <ehabkost@redhat.com> - qemu-kvm-0.12.1.2-2.34.el6
changelog:
  - kvm-Monitor-Introduce-cmd_new_ret.patch [bz#563491]
  - kvm-Monitor-Convert-simple-handlers-to-cmd_new_ret.patch [bz#563491]
  - kvm-Monitor-Convert-do_cont-to-cmd_new_ret.patch [bz#563491]
  - kvm-Monitor-Convert-do_eject-to-cmd_new_ret.patch [bz#563491]
  - kvm-Monitor-Convert-do_cpu_set-to-cmd_new_ret.patch [bz#563491]
  - kvm-Monitor-Convert-do_block_set_passwd-to-cmd_new_ret.patch [bz#563491]
  - kvm-Monitor-Convert-do_getfd-to-cmd_new_ret.patch [bz#563491]
  - kvm-Monitor-Convert-do_closefd-to-cmd_new_ret.patch [bz#563491]
  - kvm-Monitor-Convert-pci_device_hot_add-to-cmd_new_ret.patch [bz#563491]
  - kvm-Monitor-Convert-pci_device_hot_remove-to-cmd_new_ret.patch [bz#563491]
  - kvm-Monitor-Convert-do_migrate-to-cmd_new_ret.patch [bz#563491]
  - kvm-Monitor-Convert-do_memory_save-to-cmd_new_ret.patch [bz#563491]
  - kvm-Monitor-Convert-do_physical_memory_save-to-cmd_new_r.patch [bz#563491]
  - kvm-Monitor-Convert-do_info-to-cmd_new_ret.patch [bz#563491]
  - kvm-Monitor-Convert-do_change-to-cmd_new_ret.patch [bz#563491]
  - kvm-Monitor-Convert-to-mon_set_password-to-cmd_new_ret.patch [bz#563491]
  - kvm-Monitor-Convert-mon_spice_migrate-to-cmd_new_ret.patch [bz#563491]
  - kvm-Monitor-Rename-cmd_new_ret.patch [bz#563491]
  - kvm-Monitor-Debugging-support.patch [bz#563491]
  - kvm-Monitor-Drop-the-print-disabling-mechanism.patch [bz#563491]
  - kvm-Monitor-Audit-handler-return.patch [bz#563491]
  - kvm-Monitor-Debug-stray-prints-the-right-way.patch [bz#563491]
  - kvm-Monitor-Report-more-than-one-error-in-handlers.patch [bz#563491]
  - Resolves: bz#563491
    (QMP: New internal error handling mechanism)


author: Eduardo Habkost <ehabkost@redhat.com> - qemu-kvm-0.12.1.2-2.35.el6
changelog:
  - kvm-QError-New-QERR_DEVICE_NOT_ENCRYPTED.patch [bz#563641]
  - kvm-Wrong-error-message-in-block_passwd-command.patch [bz#563641]
  - kvm-Monitor-Introduce-RFQDN_REDHAT-and-use-it.patch [bz#578493]
  - kvm-QMP-Fix-Spice-event-names.patch [bz#578493]
  - Resolves: bz#563641
    (QMP: Wrong error message in block_passwd command)
  - Resolves: bz#578493
    (QMP: Fix spice event names)
  - ksm.init: touch max_kernel_pages only if it exists [bz#561907]
  - Resolves: bz#561907
  - ksmtuned: add debug information [bz#576789]
  - Resolves: bz#576789


author: Eduardo Habkost <ehabkost@redhat.com> - qemu-kvm-0.12.1.2-2.36.el6
changelog:
  - kvm-char-Remove-redundant-qemu_chr_generic_open-call.patch [bz#558236]
  - kvm-add-close-callback-for-tty-based-char-device.patch [bz#558236]
  - kvm-Restore-terminal-attributes-for-tty-based-monitor.patch [bz#558236]
  - kvm-Restore-terminal-monitor-attributes-addition.patch [bz#558236]
  - Resolves: bz#558236
    (qemu-kvm monitor corrupts tty on exit)


author: Eduardo Habkost <ehabkost@redhat.com> - qemu-kvm-0.12.1.2-2.37.el6
changelog:
  - kvm-balloon-Fix-overflow-when-reporting-actual-memory-si.patch [bz#578912]
  - kvm-json-parser-Output-the-content-of-invalid-keyword.patch [bz#576544]
  - Resolves: bz#576544
    (Error message doesn't contain the content of invalid keyword)
  - Resolves: bz#578912
    (Monitor: Overflow in 'info balloon')


author: Eduardo Habkost <ehabkost@redhat.com> - qemu-kvm-0.12.1.2-2.38.el6
changelog:
  - kvm-read-only-Make-CDROM-a-read-only-drive.patch [bz#537164]
  - kvm-read-only-BDRV_O_FLAGS-cleanup.patch [bz#537164]
  - kvm-read-only-Added-drives-readonly-option.patch [bz#537164]
  - kvm-read-only-Disable-fall-back-to-read-only.patch [bz#537164]
  - kvm-read-only-No-need-anymoe-for-bdrv_set_read_only.patch [bz#537164]
  - kvm-read_only-Ask-for-read-write-permissions-when-openin.patch [bz#537164]
  - kvm-read-only-Read-only-device-changed-to-opens-it-s-fil.patch [bz#537164]
  - kvm-read-only-qemu-img-Fix-qemu-img-can-t-create-qcow-im.patch [bz#537164]
  - kvm-block-clean-up-bdrv_open2-structure-a-bit.patch [bz#537164]
  - kvm-block-saner-flags-filtering-in-bdrv_open2.patch [bz#537164]
  - kvm-block-flush-backing_hd-in-the-right-place.patch [bz#537164]
  - kvm-block-fix-cache-flushing-in-bdrv_commit.patch [bz#537164]
  - kvm-block-more-read-only-changes-related-to-backing-file.patch [bz#537164]
  - kvm-read-only-minor-cleanup.patch [bz#537164]
  - kvm-read-only-Another-minor-cleanup.patch [bz#537164]
  - kvm-read-only-allow-read-only-CDROM-with-any-interface.patch [bz#537164]
  - kvm-qemu-img-rebase-Add-f-option.patch [bz#580028]
  - kvm-qemu-io-Fix-return-value-handling-of-bdrv_open.patch [bz#579974]
  - kvm-qemu-nbd-Fix-return-value-handling-of-bdrv_open.patch [bz#579974]
  - kvm-qemu-img-Fix-error-message.patch [bz#579974]
  - kvm-Replace-calls-of-old-bdrv_open.patch [bz#579974]
  - Resolves: bz#537164
    (-drive arg has no way to request a read only disk)
  - Resolves: bz#579974
    (Get segmentation fault when creating qcow2 format image on block device with "preallocation=metadata")
  - Resolves: bz#580028
    ('qemu-img re-base' broken on block devices)


author: Eduardo Habkost <ehabkost@redhat.com> - qemu-kvm-0.12.1.2-2.39.el6
changelog:
  - kvm-virtio-blk-revert-serial-number-support.patch [bz#564101]
  - kvm-block-add-topology-qdev-properties.patch [bz#564101]
  - kvm-virtio-blk-add-topology-support.patch [bz#564101]
  - kvm-scsi-add-topology-support.patch [bz#564101]
  - kvm-ide-add-topology-support.patch [bz#564101]
  - kvm-pcnet-make-subsystem-vendor-id-match-hardware.patch [bz#580140]
  - Resolves: bz#564101
    ([RFE] topology support in the virt block layer)
  - Resolves: bz#580140
    (emulated pcnet nic in qemu-kvm has wrong PCI subsystem ID for Windows XP driver)


author: Eduardo Habkost <ehabkost@redhat.com> - qemu-kvm-0.12.1.2-2.40.el6
changelog:
  - cpu-model-config-1.patch [bz#569661]
  - cpu-model-config-2.patch [bz#569661]
  - cpu-model-config-3.patch [bz#569661]
  - cpu-model-config-4.patch [bz#569661]
  - Resolves: bz#569661
    (RHEL6.0 requires backport of upstream cpu model support..)


author: Eduardo Habkost <ehabkost@redhat.com> - qemu-kvm-0.12.1.2-2.42.el6
changelog:
  - kvm-net-remove-NICInfo.bootable-field.patch [bz#561078]
  - kvm-net-remove-broken-net_set_boot_mask-boot-device-vali.patch [bz#561078]
  - kvm-boot-remove-unused-boot_devices_bitmap-variable.patch [bz#561078]
  - kvm-check-kvm-enabled.patch [bz#580109]
  - kvm-qemu-rename-notifier-event_notifier.patch [bz#580109]
  - kvm-virtio-API-name-cleanup.patch [bz#580109]
  - kvm-vhost-u_int64_t-uint64_t.patch [bz#580109]
  - kvm-virtio-pci-fix-coding-style.patch [bz#580109]
  - kvm-vhost-detect-lack-of-support-earlier-style.patch [bz#580109]
  - kvm-configure-vhost-related-fixes.patch [bz#580109]
  - kvm-vhost-fix-features-ack.patch [bz#580109]
  - kvm-vhost-net-disable-mergeable-buffers.patch [bz#580109]
  - Resolves: bz#561078
    ("Cannot boot from non-existent NIC" when using virt-install --pxe)
  - Resolves: bz#580109
    (vhost net lacks upstream fixes)


author: Eduardo Habkost <ehabkost@redhat.com> - qemu-kvm-0.12.1.2-2.43.el6
changelog:
  - kvm-qemu-option-Make-qemu_opts_foreach-accumulate-return.patch [bz#579470]
  - kvm-qdev-Fix-exit-code-for-device.patch [bz#579470]
  - kvm-qdev-Add-help-for-device-properties.patch [bz#579470]
  - kvm-qdev-update-help-on-device.patch [bz#579470]
  - kvm-qdev-Add-rudimentary-help-for-property-value.patch [bz#579470]
  - kvm-qdev-Free-opts-on-failed-do_device_add.patch [bz#579470]
  - kvm-qdev-Improve-diagnostics-for-bad-property-values.patch [bz#579470]
  - kvm-qdev-Catch-attempt-to-attach-more-than-one-device-to.patch [bz#579470]
  - kvm-usb-Remove-disabled-monitor_printf-in-usb_read_file.patch [bz#579470]
  - kvm-savevm-Fix-loadvm-to-report-errors-to-stderr-not-the.patch [bz#579470]
  - kvm-pc-Fix-error-reporting-for-boot-once.patch [bz#579470]
  - kvm-pc-Factor-common-code-out-of-pc_boot_set-and-cmos_in.patch [bz#579470]
  - kvm-tools-Remove-unused-cur_mon-from-qemu-tool.c.patch [bz#579470]
  - kvm-monitor-Separate-default-monitor-and-current-monitor.patch [bz#579470]
  - kvm-block-Simplify-usb_msd_initfn-test-for-can-read-bdrv.patch [bz#579470]
  - kvm-monitor-Factor-monitor_set_error-out-of-qemu_error_i.patch [bz#579470]
  - kvm-error-Move-qemu_error-friends-from-monitor.c-to-own-.patch [bz#579470]
  - kvm-error-Simplify-error-sink-setup.patch [bz#579470]
  - kvm-error-Move-qemu_error-friends-into-their-own-header.patch [bz#579470]
  - kvm-error-New-error_printf-and-error_vprintf.patch [bz#579470]
  - kvm-error-Don-t-abuse-qemu_error-for-non-error-in-qdev_d.patch [bz#579470]
  - kvm-error-Don-t-abuse-qemu_error-for-non-error-in-qbus_f.patch [bz#579470]
  - kvm-error-Don-t-abuse-qemu_error-for-non-error-in-scsi_h.patch [bz#579470]
  - kvm-error-Replace-qemu_error-by-error_report.patch [bz#579470]
  - kvm-error-Rename-qemu_error_new-to-qerror_report.patch [bz#579470]
  - kvm-error-Infrastructure-to-track-locations-for-error-re.patch [bz#579470]
  - kvm-error-Include-the-program-name-in-error-messages-to-.patch [bz#579470]
  - kvm-error-Track-locations-in-configuration-files.patch [bz#579470]
  - kvm-QemuOpts-Fix-qemu_config_parse-to-catch-file-read-er.patch [bz#579470]
  - kvm-error-Track-locations-on-command-line.patch [bz#579470]
  - kvm-qdev-Fix-device-and-device_add-to-handle-unsuitable-.patch [bz#579470]
  - kvm-qdev-Factor-qdev_create_from_info-out-of-qdev_create.patch [bz#579470]
  - kvm-qdev-Hide-no_user-devices-from-users.patch [bz#579470]
  - kvm-qdev-Hide-ptr-properties-from-users.patch [bz#579470]
  - kvm-monitor-New-monitor_cur_is_qmp.patch [bz#579470]
  - kvm-error-Let-converted-handlers-print-in-human-monitor.patch [bz#579470]
  - kvm-error-Polish-human-readable-error-descriptions.patch [bz#579470]
  - kvm-error-New-QERR_PROPERTY_NOT_FOUND.patch [bz#579470]
  - kvm-error-New-QERR_PROPERTY_VALUE_BAD.patch [bz#579470]
  - kvm-error-New-QERR_PROPERTY_VALUE_IN_USE.patch [bz#579470]
  - kvm-error-New-QERR_PROPERTY_VALUE_NOT_FOUND.patch [bz#579470]
  - kvm-qdev-convert-setting-device-properties-to-QError.patch [bz#579470]
  - kvm-qdev-Relax-parsing-of-bus-option.patch [bz#579470]
  - kvm-error-New-QERR_BUS_NOT_FOUND.patch [bz#579470]
  - kvm-error-New-QERR_DEVICE_MULTIPLE_BUSSES.patch [bz#579470]
  - kvm-error-New-QERR_DEVICE_NO_BUS.patch [bz#579470]
  - kvm-qdev-Convert-qbus_find-to-QError.patch [bz#579470]
  - kvm-error-New-error_printf_unless_qmp.patch [bz#579470]
  - kvm-error-New-QERR_BAD_BUS_FOR_DEVICE.patch [bz#579470]
  - kvm-error-New-QERR_BUS_NO_HOTPLUG.patch [bz#579470]
  - kvm-error-New-QERR_DEVICE_INIT_FAILED.patch [bz#579470]
  - kvm-error-New-QERR_NO_BUS_FOR_DEVICE.patch [bz#579470]
  - kvm-Revert-qdev-Use-QError-for-device-not-found-error.patch [bz#579470]
  - kvm-error-Convert-do_device_add-to-QError.patch [bz#579470]
  - kvm-qemu-option-Functions-to-convert-to-from-QDict.patch [bz#579470]
  - kvm-qemu-option-Move-the-implied-first-name-into-QemuOpt.patch [bz#579470]
  - kvm-qemu-option-Rename-find_list-to-qemu_find_opts-exter.patch [bz#579470]
  - kvm-monitor-New-argument-type-O.patch [bz#579470]
  - kvm-monitor-Use-argument-type-O-for-device_add.patch [bz#579470]
  - kvm-monitor-convert-do_device_add-to-QObject.patch [bz#579470]
  - kvm-error-Trim-includes-after-Move-qemu_error-friends.patch [bz#579470]
  - kvm-error-Trim-includes-in-qerror.c.patch [bz#579470]
  - kvm-error-Trim-includes-after-Infrastructure-to-track-lo.patch [bz#579470]
  - kvm-error-Make-use-of-error_set_progname-optional.patch [bz#579470]
  - kvm-error-Link-qemu-img-qemu-nbd-qemu-io-with-qemu-error.patch [bz#579470]
  - kvm-error-Move-qerror_report-from-qemu-error.-ch-to-qerr.patch [bz#579470]
  - Resolves: bz#579470
    (QMP: device_add support)


author: Eduardo Habkost <ehabkost@redhat.com> - qemu-kvm-0.12.1.2-2.44.el6
changelog:
  - kvm-spice-add-more-config-options-readd.patch [bz#576561]
  - BuildRequires spice-server-devel >= 0.4.2-10.el6 because of API changes
  - Resolves: bz#576561
    (spice: add more config options)


author: Eduardo Habkost <ehabkost@redhat.com> - qemu-kvm-0.12.1.2-2.45.el6
changelog:
  - kvm-Documentation-Add-monitor-commands-to-function-index.patch [bz#559670]
  - kvm-error-Put-error-definitions-back-in-alphabetical-ord.patch [bz#559670]
  - kvm-error-New-QERR_DUPLICATE_ID.patch [bz#559670]
  - kvm-error-Convert-qemu_opts_create-to-QError.patch [bz#559670]
  - kvm-error-New-QERR_INVALID_PARAMETER_VALUE.patch [bz#559670]
  - kvm-error-Convert-qemu_opts_set-to-QError.patch [bz#559670]
  - kvm-error-Drop-extra-messages-after-qemu_opts_set-and-qe.patch [bz#559670]
  - kvm-error-Use-QERR_INVALID_PARAMETER_VALUE-instead-of-QE.patch [bz#559670]
  - kvm-error-Convert-qemu_opts_validate-to-QError.patch [bz#559670]
  - kvm-error-Convert-net_client_init-to-QError.patch [bz#559670]
  - kvm-error-New-QERR_DEVICE_IN_USE.patch [bz#559670]
  - kvm-monitor-New-commands-netdev_add-netdev_del.patch [bz#559670]
  - kvm-qdev-Convert-qdev_unplug-to-QError.patch [bz#582325]
  - kvm-monitor-convert-do_device_del-to-QObject-QError.patch [bz#582325]
  - kvm-block-Fix-error-code-in-multiwrite-for-immediate-fai.patch [bz#582575]
  - kvm-block-Fix-multiwrite-memory-leak-in-error-case.patch [bz#582575]
  - Resolves: bz#559670
    (No 'netdev_add' command in monitor)
  - Resolves: bz#582325
    (QMP: device_del support)
  - Resolves: bz#582575
    (Backport bdrv_aio_multiwrite fixes)


author: Eduardo Habkost <ehabkost@redhat.com> - qemu-kvm-0.12.1.2-2.46.el6
changelog:
  - kvm-spice-add-auth-info-to-monitor-events.patch [bz#581540]
  - Resolves: bz#581540
    (SPICE graphics event does not include auth details)


author: Eduardo Habkost <ehabkost@redhat.com> - qemu-kvm-0.12.1.2-2.47.el6
changelog:
  - kvm-Request-setting-of-nmi_pending-and-sipi_vector.patch [bz#569613]
  - Resolves: bz#569613
    (backport qemu-kvm-0.12.3 fixes to RHEL6)


author: Eduardo Habkost <ehabkost@redhat.com> - qemu-kvm-0.12.1.2-2.48.el6
changelog:
  - kvm-virtio-serial-save-load-Ensure-target-has-enough-por.patch [bz#574296]
  - kvm-virtio-serial-save-load-Ensure-nr_ports-on-src-and-d.patch [bz#574296]
  - kvm-virtio-serial-save-load-Ensure-we-have-hot-plugged-p.patch [bz#574296]
  - kvm-virtio-serial-save-load-Send-target-host-connection-.patch [bz#574296]
  - kvm-virtio-serial-Use-control-messages-to-notify-guest-o.patch [bz#574296]
  - kvm-virtio-serial-whitespace-match-surrounding-code.patch [bz#574296]
  - kvm-virtio-serial-Remove-redundant-check-for-0-sized-wri.patch [bz#574296]
  - kvm-virtio-serial-Update-copyright-year-to-2010.patch [bz#574296]
  - kvm-virtio-serial-Propagate-errors-in-initialising-ports.patch [bz#574296]
  - kvm-virtio-serial-Send-out-guest-data-to-ports-only-if-p.patch [bz#574296]
  - kvm-iov-Introduce-a-new-file-for-helpers-around-iovs-add.patch [bz#574296]
  - kvm-iov-Add-iov_to_buf-and-iov_size-helpers.patch [bz#574296]
  - kvm-virtio-serial-Handle-scatter-gather-buffers-for-cont.patch [bz#574296]
  - kvm-virtio-serial-Handle-scatter-gather-input-from-the-g.patch [bz#574296]
  - kvm-virtio-serial-Apps-should-consume-all-data-that-gues.patch [bz#574296]
  - kvm-virtio-serial-Discard-data-that-guest-sends-us-when-.patch [bz#574296]
  - kvm-virtio-serial-Implement-flow-control-for-individual-.patch [bz#574296]
  - kvm-virtio-serial-Handle-output-from-guest-to-unintialis.patch [bz#574296]
  - kvm-virtio-serial-bus-wake-up-iothread-upon-guest-read-n.patch [bz#574296]
  - kvm-Bail-out-when-VCPU_CREATE-fails.patch [bz#587227]
  - Resolves: bz#574296
    (Fix migration for virtio-serial after port hot-plug/hot-unplug operations)
  - Resolves: bz#587227
    (Fix segfault when creating more vcpus than allowed.)


author: Eduardo Habkost <ehabkost@redhat.com> - qemu-kvm-0.12.1.2-2.49.el6
changelog:
  - kvm-block-Free-iovec-arrays-allocated-by-multiwrite_merg.patch [bz#586572]
  - Resolves: bz#586572
    (virtio-blk multiwrite merge memory leak)
  - Force spice to be enabled and fix BuildRequires to use spice-server-devel
  - Resolves: bz#588904
    (qemu-kvm builds without spice support)


author: Eduardo Habkost <ehabkost@redhat.com> - qemu-kvm-0.12.1.2-2.50.el6
changelog:
  - kvm-vl.c-fix-BZ-588828-endless-loop-caused-by-non-option.patch [bz#588828]
  - Resolves: bz#588828
    (endless loop when parsing of command line with bare image argument)


author: Eduardo Habkost <ehabkost@redhat.com> - qemu-kvm-0.12.1.2-2.51.el6
changelog:
  - kvm-fdc-fix-drive-property-handling.patch [bz#584902]
  - Resolves: bz#584902
    (Cannot associate drive with a floppy device using -global)


author: Eduardo Habkost <ehabkost@redhat.com> - qemu-kvm-0.12.1.2-2.52.el6
changelog:
  - kvm-qemu-img-use-the-heap-instead-of-the-huge-stack-arra.patch [bz#585837]
  - kvm-qemu-img-rebase-Fix-output-image-corruption.patch [bz#585837]
  - Resolves: bz#585837
    (After re-base snapshot, the file in the snapshot disappeared)


author: Eduardo Habkost <ehabkost@redhat.com> - qemu-kvm-0.12.1.2-2.53.el6
changelog:
  - kvm-virtio-blk-Fix-use-after-free-in-error-case.patch [bz#578448]
  - kvm-block-Fix-multiwrite-error-handling.patch [bz#578448]
  - kvm-Fix-boot-once-option.patch [bz#579692]
  - kvm-QError-New-QERR_QMP_BAD_INPUT_OBJECT_MEMBER.patch [bz#573578]
  - kvm-QMP-Use-QERR_QMP_BAD_INPUT_OBJECT_MEMBER.patch [bz#573578]
  - kvm-QError-Improve-QERR_QMP_BAD_INPUT_OBJECT-desc.patch [bz#573578]
  - kvm-QMP-Check-arguments-member-s-type.patch [bz#573578]
  - kvm-QMP-Introduce-RESUME-event.patch [bz#590102]
  - kvm-pci-irq_state-vmstate-breakage.patch [bz#588133]
  - Resolves: bz#573578
    (Segfault when migrating via QMP command interface)
  - Resolves: bz#578448
    (qemu-kvm segfault when nfs restart(without using werror&rerror))
  - Resolves: bz#579692
    (qemu-kvm "-boot once=drives" couldn't function properly)
  - Resolves: bz#588133
    (RHEL5.4 guest can lose virtio networking during migration)
  - Resolves: bz#590102
    (QMP: Backport RESUME event)


author: Eduardo Habkost <ehabkost@redhat.com> - qemu-kvm-0.12.1.2-2.54.el6
changelog:
  - kvm-qemu-config-qemu_read_config_file-reads-the-normal-c.patch [bz#588756]
  - kvm-qemu-config-Make-qemu_config_parse-more-generic.patch [bz#588756]
  - kvm-blkdebug-Basic-request-passthrough.patch [bz#588756]
  - kvm-blkdebug-Inject-errors.patch [bz#588756]
  - kvm-Make-qemu-config-available-for-tools.patch [bz#588756]
  - kvm-blkdebug-Add-events-and-rules.patch [bz#588756]
  - kvm-qcow2-Trigger-blkdebug-events.patch [bz#588756]
  - kvm-qcow2-Fix-access-after-end-of-array.patch [bz#588762]
  - kvm-qcow2-rename-two-QCowAIOCB-members.patch [bz#588762]
  - kvm-qcow2-Don-t-ignore-immediate-read-write-failures.patch [bz#588762]
  - kvm-qcow2-Remove-request-from-in-flight-list-after-error.patch [bz#588762]
  - kvm-qcow2-Return-0-errno-in-write_l2_entries.patch [bz#588762]
  - kvm-qcow2-Fix-error-return-code-in-qcow2_alloc_cluster_l.patch [bz#588762]
  - kvm-qcow2-Return-0-errno-in-write_l1_entry.patch [bz#588762]
  - kvm-qcow2-Return-0-errno-in-l2_allocate.patch [bz#588762]
  - kvm-qcow2-Remove-abort-on-free_clusters-failure.patch [bz#588762]
  - kvm-Add-qemu-error.o-only-once-to-target-list.patch [bz#591061]
  - kvm-block-Fix-bdrv_commit.patch [bz#589439]
  - kvm-fix-80000001.EDX-supported-bit-filtering.patch [bz#578106]
  - kvm-fix-CPUID-vendor-override.patch [bz#591604]
  - Resolves: bz#578106
    (call trace when boot guest with -cpu host)
  - Resolves: bz#588756
    (blkdebug is missing)
  - Resolves: bz#588762
    (Backport qcow2 fixes)
  - Resolves: bz#589439
    (Qcow2 snapshot got corruption after commit using block device)
  - Resolves: bz#591061
    (make fails to build after make clean)
  - Resolves: bz#591604
    (cannot override cpu vendor from the command line)


author: Eduardo Habkost <ehabkost@redhat.com> - qemu-kvm-0.12.1.2-2.55.el6
changelog:
  - kvm-turn-off-kvmclock-when-resetting-cpu.patch [bz#588884]
  - kvm-virtio-blk-Avoid-zeroing-every-request-structure.patch [bz#593369]
  - Resolves: bz#588884
    (Rebooting a kernel with kvmclock enabled, into a kernel with kvmclock disabled, causes random crashes)
  - Resolves: bz#593369
    (virtio-blk: Avoid zeroing every request structure)


author: Eduardo Habkost <ehabkost@redhat.com> - qemu-kvm-0.12.1.2-2.56.el6
changelog:
  - kvm-dmg-fix-open-failure.patch [bz#580363]
  - kvm-block-get-rid-of-the-BDRV_O_FILE-flag.patch [bz#580363]
  - kvm-block-Convert-first_drv-to-QLIST.patch [bz#580363]
  - kvm-block-separate-raw-images-from-the-file-protocol.patch [bz#580363]
  - kvm-block-Split-bdrv_open.patch [bz#580363]
  - kvm-block-Avoid-forward-declaration-of-bdrv_open_common.patch [bz#580363]
  - kvm-block-Open-the-underlying-image-file-in-generic-code.patch [bz#580363]
  - kvm-block-bdrv_has_zero_init.patch [bz#580363]
  - kvm-block-Do-not-export-bdrv_first.patch [bz#590998]
  - kvm-block-Convert-bdrv_first-to-QTAILQ.patch [bz#590998]
  - kvm-block-Add-wr_highest_sector-blockstat.patch [bz#590998]
  - Resolves: bz#580363
    (Error while creating raw image on block device)
  - Resolves: bz#590998
    (qcow2 high watermark)


author: Eduardo Habkost <ehabkost@redhat.com> - qemu-kvm-0.12.1.2-2.57.el6
changelog:
  - kvm-stash-away-SCM_RIGHTS-fd-until-a-getfd-command-arriv.patch [bz#582684]
  - Resolves: bz#582684
    (Monitor: getfd command is broken)


author: Eduardo Habkost <ehabkost@redhat.com> - qemu-kvm-0.12.1.2-2.58.el6
changelog:
  - kvm-Fix-segfault-after-device-assignment-hot-remove.patch [bz#582874]
  - Resolves: bz#582874
    (Guest hangs during restart after hot unplug then hot plug physical NIC card)


author: Eduardo Habkost <ehabkost@redhat.com> - qemu-kvm-0.12.1.2-2.59.el6
changelog:
  - kvm-pci-cleanly-backout-of-pci_qdev_init.patch [bz#590884]
  - kvm-ide-Fix-ide_dma_cancel.patch [bz#593287]
  - Resolves: bz#590884
    (bogus 'info pci' state when hot-added assigned device fails to initialize)
  - Resolves: bz#593287
    (Failed asserting during ide_dma_cancel)


author: Eduardo Habkost <ehabkost@redhat.com> - qemu-kvm-0.12.1.2-2.60.el6
changelog:
  - kvm-spice-vmc-add-copyright.patch [bz#576488]
  - kvm-spice-vmc-remove-debug-prints-and-defines.patch [bz#576488]
  - kvm-spice-vmc-add-braces-to-single-line-if-s.patch [bz#576488]
  - kvm-spice-vmc-s-SpiceVirtualChannel-SpiceVMChannel-g.patch [bz#576488]
  - kvm-spice-vmc-s-spice_virtual_channel-spice_vmc-g.patch [bz#576488]
  - kvm-spice-vmc-all-variables-of-type-SpiceVMChannel-renam.patch [bz#576488]
  - kvm-spice-vmc-remove-meaningless-cast-of-void.patch [bz#576488]
  - kvm-spice-vmc-add-spice_vmc_ring_t-fix-write-function.patch [bz#576488]
  - kvm-spice-vmc-don-t-touch-guest_out_ring-on-unplug.patch [bz#576488]
  - kvm-spice-vmc-VirtIOSerialPort-vars-renamed-to-vserport.patch [bz#576488]
  - kvm-spice-vmc-add-nr-property.patch [bz#576488]
  - kvm-spice-vmc-s-SPICE_VM_CHANNEL-SPICE_VMC-g.patch [bz#576488]
  - kvm-spice-vmc-add-vmstate.-saves-active_interface.patch [bz#576488]
  - kvm-spice-vmc-rename-guest-device-name-to-com.redhat.spi.patch [bz#576488]
  - kvm-spice-vmc-remove-unused-property-name.patch [bz#576488]
  - Resolves: bz#576488
    (Spice: virtio serial based device for guest-spice client communication)


author: Eduardo Habkost <ehabkost@redhat.com> - qemu-kvm-0.12.1.2-2.61.el6
changelog:
  - Add "file" format to bdrv whitelist
  - Resolves: bz#593909
    (VM can not start by using qemu-kvm-0.12.1.2-2.56.el6)


author: Eduardo Habkost <ehabkost@redhat.com> - qemu-kvm-0.12.1.2-2.62.el6
changelog:
  - kvm-block-add-logical_block_size-property.patch [bz#566785]
  - kvm-virtio-serial-bus-fix-ports_map-allocation.patch [bz#591176]
  - kvm-Move-cpu-model-config-file-to-agree-with-rpm-build-B.patch [bz#569661]
  - Resolves: bz#566785
    (virt block layer must not keep guest's logical_block_size fixed)
  - Resolves: bz#569661
    (RHEL6.0 requires backport of upstream cpu model support..)
  - Resolves: bz#591176
    (migration fails since virtio-serial-bus is using uninitialized memory)


author: Eduardo Habkost <ehabkost@redhat.com> - qemu-kvm-0.12.1.2-2.63.el6
changelog:
  - kvm-fix-undefined-shifts-by-32.patch [bz#590922]
  - kvm-qemu-char.c-drop-debug-printfs-from-qemu_chr_parse_c.patch [bz#590922]
  - kvm-Fix-corner-case-in-chardev-udp-parameter.patch [bz#590922]
  - kvm-pci-passthrough-zap-option-rom-scanning.patch [bz#590922]
  - kvm-UHCI-spurious-interrupt-fix.patch [bz#590922]
  - kvm-Fix-SIGFPE-for-vnc-display-of-width-height-1.patch [bz#590922]
  - kvm-spice-vmc-remove-ringbuffer.patch [bz#589670]
  - kvm-spice-vmc-add-dprintfs.patch [bz#589670]
  - Resolves: bz#589670
    (spice: Ensure ring data is save/restored on migration)
  - Related: bz#590922
    (backport qemu-kvm-0.12.4 fixes to RHEL6)


author: Eduardo Habkost <ehabkost@redhat.com> - qemu-kvm-0.12.1.2-2.64.el6
changelog:
  - kvm-qemu-kvm-fix-crash-on-reboot-with-vhost-net.patch [bz#585940]
  - Related: bz#585940
    (qemu-kvm crashes on reboot when vhost is enabled)


author: Eduardo Habkost <ehabkost@redhat.com> - qemu-kvm-0.12.1.2-2.65.el6
changelog:
  - kvm-qcow2-Fix-creation-of-large-images.patch [bz#577106]
  - kvm-vnc-sync-lock-modifier-state-on-connect.patch [bz#569767]
  - kvm-json-lexer-Initialize-x-and-y.patch [bz#589952]
  - kvm-json-lexer-Handle-missing-escapes.patch [bz#589952]
  - kvm-qjson-Handle-f.patch [bz#589952]
  - kvm-json-lexer-Drop-buf.patch [bz#589952]
  - kvm-json-streamer-Don-t-use-qdict_put_obj.patch [bz#589952]
  - kvm-block-fix-sector-comparism-in-multiwrite_req_compare.patch [bz#596119]
  - kvm-block-Fix-multiwrite-with-overlapping-requests.patch [bz#596119]
  - Resolves: bz#569767
    (Caps Lock the key's appearance  of guest is not synchronous as host's --view kvm with vnc)
  - Resolves: bz#577106
    (Abort/Segfault when creating qcow2 format image with 512b cluster size)
  - Resolves: bz#589952
    (QMP breaks when issuing any command with a backslash)
  - Resolves: bz#596119
    (Possible corruption after block request merge)


author: Eduardo Habkost <ehabkost@redhat.com> - qemu-kvm-0.12.1.2-2.66.el6
changelog:
  - kvm-device-assignment-use-stdint-types.patch [bz#595495]
  - kvm-device-assignment-Don-t-use-libpci.patch [bz#595495]
  - kvm-device-assignment-add-config-fd-qdev-property.patch [bz#595495]
  - Resolves: bz#595495
    (Fail to hotplug pci device to guest)


author: Eduardo Habkost <ehabkost@redhat.com> - qemu-kvm-0.12.1.2-2.67.el6
changelog:
  - kvm-qemu-address-todo-comment-in-exec.c.patch [bz#595301]
  - Resolves: bz#595301
    (QEMU terminates without warning with virtio-net and SMP enabled)


author: Eduardo Habkost <ehabkost@redhat.com> - qemu-kvm-0.12.1.2-2.68.el6
changelog:
  - kvm-virtio-blk-fix-barrier-support.patch [bz#595813]
  - Resolves: bz#595813
    (virtio-blk doesn't handle barriers correctly)


author: Eduardo Habkost <ehabkost@redhat.com> - qemu-kvm-0.12.1.2-2.69.el6
changelog:
  - Changes to make-release script with no resulting changes on binary package
  - kvm-virtio-utilize-PUBLISH_USED_IDX-feature.patch [bz#595287]
  - Resolves: bz#595287
    (virtio net/vhost net speed enhancements from upstream kernel)


author: Eduardo Habkost <ehabkost@redhat.com> - qemu-kvm-0.12.1.2-2.70.el6
changelog:
  - kvm-virtio-invoke-set_features-on-load.patch [bz#595263]
  - kvm-virtio-net-return-with-value-in-void-function.patch [bz#595263]
  - kvm-vhost-net-fix-reversed-logic-in-mask-notifiers.patch [bz#585940]
  - kvm-hpet-Disable-for-Red-Hat-Enterprise-Linux.patch [bz#595130]
  - ksmtuned: typo MemCached -> Cached [bz#597005]
  - kvm-virtio-net-stop-vhost-backend-on-vmstop.patch [bz#598896]
  - kvm-msix-fix-msix_set-unset_mask_notifier.patch [bz#598896]
  - Resolves: bz#585940
    (qemu-kvm crashes on reboot when vhost is enabled)
  - Resolves: bz#595130
    (Disable hpet by default)
  - Resolves: bz#595263
    (virtio net lacks upstream fixes as of may 24)
  - Resolves: bz#597005
    (ksmtune: typo: MemCached -> Cached)
  - Resolves: bz#598896
    (migration breaks networking with vhost-net)


author: Eduardo Habkost <ehabkost@redhat.com> - qemu-kvm-0.12.1.2-2.71.el6
changelog:
  - kvm-device-assignment-fix-failure-to-exit-on-shared-IRQ.patch [bz#585310]
  - kvm-doc-Fix-host-forwarding-monitor-command-documentatio.patch [bz#588719]
  - kvm-doc-Fix-acl-monitor-command-documentation.patch [bz#588719]
  - kvm-doc-Heading-for-monitor-command-cpu-got-lost-restore.patch [bz#588719]
  - kvm-doc-Clean-up-monitor-command-function-index.patch [bz#588719]
  - kvm-fix-info-cpus-halted-state-reporting.patch [bz#593769]
  - kvm-sysemu-Export-no_shutdown.patch [bz#559618]
  - kvm-Monitor-Return-before-exiting-with-quit.patch [bz#559618]
  - kvm-QMP-Add-Downstream-extension-of-QMP-to-spec.patch [bz#566291]
  - kvm-Revert-PCI-Convert-pci_device_hot_add-to-QObject.patch [bz#580365]
  - kvm-Revert-monitor-Convert-do_pci_device_hot_remove-to-Q.patch [bz#580365]
  - kvm-drive-allow-rerror-werror-and-readonly-for-if-none.patch [bz#565609 bz#593256]
  - kvm-qdev-properties-Fix-u-intXX-parsers.patch [bz#596093]
  - kvm-vnc-factor-out-vnc_desktop_resize.patch [bz#590070]
  - kvm-vnc-send-desktopresize-event-as-reply-to-set-encodin.patch [bz#590070]
  - kvm-vnc-keep-track-of-client-desktop-size.patch [bz#590070]
  - kvm-vnc-don-t-send-invalid-screen-updates.patch [bz#590070]
  - kvm-vnc-move-size-changed-check-into-the-vnc_desktop_res.patch [bz#590070]
  - kvm-check-for-active_console-before-using-it.patch [bz#591759]
  - Resolves: bz#559618
    (QMP: Fix 'quit' to return success before exiting)
  - Resolves: bz#565609
    (Unable to use werror/rerror with  -drive syntax using if=none)
  - Resolves: bz#566291
    (QMP: Support vendor extensions)
  - Resolves: bz#580365
    (QMP: pci_add/pci_del conversion should be reverted)
  - Resolves: bz#585310
    (qemu-kvm does not exit when device assignment fails due to IRQ sharing)
  - Resolves: bz#588719
    (Fix monitor command documentation)
  - Resolves: bz#590070
    (QEMU misses DESKTOP-RESIZE event if it is triggered during client connection initialization)
  - Resolves: bz#591759
    (Segmentation fault when using vnc to view guest without vga card)
  - Resolves: bz#593256
    (Unable to set readonly flag for floppy disks)
  - Resolves: bz#593769
    ("info cpus" doesn't show halted state)
  - Resolves: bz#596093
    (16bit integer qdev properties are not parsed correctly.)


author: Eduardo Habkost <ehabkost@redhat.com> - qemu-kvm-0.12.1.2-2.72.el6
changelog:
  - kvm-Monitor-Make-RFQDN_REDHAT-public.patch [bz#586349]
  - kvm-QMP-Add-error-reason-to-BLOCK_IO_ERROR-event.patch [bz#586349]
  - kvm-virtio-net-truncating-packet.patch [bz#591494]
  - kvm-vhost-net-check-PUBLISH_USED-in-backend.patch [bz#600203]
  - kvm-device-assignment-don-t-truncate-MSIX-capabilities-t.patch [bz#596315]
  - kvm-If-a-USB-keyboard-is-unplugged-the-keyboard-eventhan.patch [bz#561433]
  - Resolves: bz#561433
    (Segfault when keyboard is removed)
  - Resolves: bz#586349
    (BLOCK_IO_ERROR event does not provide the errno that caused it.)
  - Resolves: bz#591494
    (Virtio: Transfer file caused guest in same vlan abnormally quit)
  - Resolves: bz#596315
    (device assignment truncates MSIX table size)
  - Resolves: bz#600203
    (vhost net new userspace on old kernel: 95: falling back on userspace virtio)


author: Eduardo Habkost <ehabkost@redhat.com> - qemu-kvm-0.12.1.2-2.73.el6
changelog:
  - kvm-net-Fix-hotplug-with-pci_add.patch [bz#599460]
  - Resolves: bz#599460
    (virtio nic is hotpluged when hotplug rtl8139 nic to guest)


author: Eduardo Habkost <ehabkost@redhat.com> - qemu-kvm-0.12.1.2-2.74.el6
changelog:
  - kvm-raw-posix-Detect-CDROM-via-ioctl-on-linux.patch [bz#593758]
  - kvm-block-Remove-special-case-for-vvfat.patch [bz#593758]
  - kvm-block-Make-find_image_format-return-raw-BlockDriver-.patch [bz#593758]
  - kvm-block-Add-missing-bdrv_delete-for-SG_IO-BlockDriver-.patch [bz#593758]
  - kvm-block-Assume-raw-for-drives-without-media.patch [bz#593758]
  - Resolves: bz#593758
    (qemu fails to start with -cdrom /dev/sr0 if no media inserted)


author: Eduardo Habkost <ehabkost@redhat.com> - qemu-kvm-0.12.1.2-2.75.el6
changelog:
  - kvm-qcow2-Fix-corruption-after-refblock-allocation.patch [bz#598407]
  - kvm-qcow2-Fix-corruption-after-error-in-update_refcount.patch [bz#598507]
  - kvm-qcow2-Allow-qcow2_get_cluster_offset-to-return-error.patch [bz#598507]
  - kvm-qcow2-Change-l2_load-to-return-0-errno.patch [bz#598507]
  - kvm-qcow2-Return-right-error-code-in-write_refcount_bloc.patch [bz#598507]
  - kvm-qcow2-Clear-L2-table-cache-after-write-error.patch [bz#598507]
  - kvm-qcow2-Fix-error-handling-in-l2_allocate.patch [bz#598507]
  - kvm-qcow2-Restore-L1-entry-on-l2_allocate-failure.patch [bz#598507]
  - kvm-qcow2-Allow-get_refcount-to-return-errors.patch [bz#598507]
  - kvm-qcow2-Avoid-shadowing-variable-in-alloc_clusters_nor.patch [bz#598507]
  - kvm-qcow2-Allow-alloc_clusters_noref-to-return-errors.patch [bz#598507]
  - kvm-qcow2-Return-real-error-code-in-load_refcount_block.patch [bz#598507]
  - kvm-make-release-make-mtime-owner-group-consistent.patch
  - Resolves: bz#598407
    (qcow2 corruption bug in refcount table growth)
  - Resolves: bz#598507
    (Backport qcow2 error path fixes)


author: Eduardo Habkost <ehabkost@redhat.com> - qemu-kvm-0.12.1.2-2.76.el6
changelog:
  - kvm-fix-vnc-memory-corruption-with-width-1400.patch [bz#602724]
  - kvm-net-Fix-VM-start-with-net-none.patch [bz#599460]
  - kvm-monitor-Remove-pci_add-command-for-Red-Hat-Enterpris.patch [bz#602590]
  - kvm-monitor-Remove-pci_del-command-for-Red-Hat-Enterpris.patch [bz#602590]
  - kvm-monitor-Remove-drive_add-command-for-Red-Hat-Enterpr.patch [bz#602590]
  - Resolves: bz#599460
    (virtio nic is hotpluged when hotplug rtl8139 nic to guest)
  - Resolves: bz#602590
    (Disable pci_add, pci_del, drive_add)
  - Resolves: bz#602724
    (VNC disconnect segfault on KVM video consoles)


author: Eduardo Habkost <ehabkost@redhat.com> - qemu-kvm-0.12.1.2-2.77.el6
changelog:
  - kvm.modules: autoload vhost-net module too [bz#596891]
  - Resolves: bz#596891
    (vhost-net module should be loaded automatically)


author: Eduardo Habkost <ehabkost@redhat.com> - qemu-kvm-0.12.1.2-2.78.el6
changelog:
  - kvm-block-read-only-open-cdrom-as-read-only-when-using-m.patch [bz#602026]
  - kvm-acpi_piix4-save-gpe-and-pci-hotplug-slot-status.patch [bz#598022]
  - kvm-Don-t-check-for-bus-master-for-old-guests.patch [bz#596014]
  - kvm-Make-IDE-drives-defined-with-device-visible-to-cmos_.patch [bz#597147]
  - Resolves: bz#596014
    (hot add virtio-blk-pci via device_add lead to virtio network lost)
  - Resolves: bz#597147
    (libvirt: kvm disk error after first stage install of Win2K or WinXP)
  - Resolves: bz#598022
    (Hot-added device is not visible in guest after live-migration.)
  - Resolves: bz#602026
    (Cannot change cdrom by "change device filename [format] " in (qemu) command line)


author: Eduardo Habkost <ehabkost@redhat.com> - qemu-kvm-0.12.1.2-2.79.el6
changelog:
  - kvm-Make-geometry-of-IDE-drives-defined-with-device-visi.patch [bz#597147]
  - Resolves: bz#597147
    (libvirt: kvm disk error after first stage install of Win2K or WinXP)


author: Eduardo Habkost <ehabkost@redhat.com> - qemu-kvm-0.12.1.2-2.80.el6
changelog:
  - don't package kvmtrace anymore
  - Resolves: bz#605426
    (obsolete kvmtrace binary is still being packaged)


author: Eduardo Habkost <ehabkost@redhat.com> - qemu-kvm-0.12.1.2-2.81.el6
changelog:
  - kvm-virtio-Enable-the-PUBLISH_USED-feature-by-default-fo.patch [bz#602417]
  - kvm-do-not-enter-vcpu-again-if-it-was-stopped-during-IO.patch [bz#595647]
  - Resolves: bz#595647
    (Windows guest with qxl driver can't get into S3 state)
  - Resolves: bz#602417
    (Enable VIRTIO_RING_F_PUBLISHED bit for all virtio devices)


author: Eduardo Habkost <ehabkost@redhat.com> - qemu-kvm-0.12.1.2-2.82.el6
changelog:
  - kvm-monitor-allow-device-to-be-ejected-if-no-disk-is-ins.patch [bz#581789]
  - kvm-New-slots-need-dirty-tracking-enabled-when-migrating.patch [bz#596609]
  - kvm-Make-netdev_del-delete-the-netdev-even-when-it-s-in-.patch [bz#596274]
  - kvm-device-assignment-msi-PBA-is-long.patch [bz#605359]
  - kvm-qcow2-Fix-qemu-img-check-segfault-on-corrupted-image.patch [bz#604210]
  - kvm-qcow2-Don-t-try-to-check-tables-that-couldn-t-be-loa.patch [bz#604210]
  - kvm-qcow2-Fix-error-handling-during-metadata-preallocati.patch [bz#604210]
  - kvm-block-Add-bdrv_-p-write_sync.patch [bz#607200]
  - kvm-qcow2-Use-bdrv_-p-write_sync-for-metadata-writes.patch [bz#607200]
  - kvm-virtio-serial-Fix-compat-property-name.patch [bz#607263]
  - kvm-rtc-Remove-TARGET_I386-from-qemu-config.c-enables-dr.patch [bz#606733]
  - Resolves: bz#581789
    (Cannot eject cd-rom when configured to host cd-rom)
  - Resolves: bz#596274
    (QMP: netdev_del sometimes fails claiming the device is in use)
  - Resolves: bz#596609
    (Live migration failed when migration during boot)
  - Resolves: bz#604210
    (Segmentation fault when check  preallocated qcow2 image on lvm.)
  - Resolves: bz#605359
    (Fix MSIX regression from bz595495)
  - Resolves: bz#606733
    (Unable to set the driftfix parameter)
  - Resolves: bz#607200
    (qcow2 image corruption when using cache=writeback)
  - Resolves: bz#607263
    (Unable to launch QEMU with -M pc-0.12 and  virtio serial)


author: Eduardo Habkost <ehabkost@redhat.com> - qemu-kvm-0.12.1.2-2.83.el6
changelog:
  - kvm-add-some-tests-for-invalid-JSON.patch [bz#585009]
  - kvm-implement-optional-lookahead-in-json-lexer.patch [bz#585009]
  - kvm-remove-unnecessary-lookaheads.patch [bz#585009]
  - kvm-per-machine-type-smbios-Type-1-smbios-values.patch [bz#605704]
  - kvm-raw-posix-Use-pread-pwrite-instead-of-lseek-read-wri.patch [bz#607688]
  - kvm-block-Cache-total_sectors-to-reduce-bdrv_getlength-c.patch [bz#607688]
  - kvm-block-allow-filenames-with-colons-again-for-host-dev.patch [bz#599122]
  - Resolves: bz#585009
    (QMP: input needs trailing  char)
  - Resolves: bz#599122
    (Unable to launch QEMU with a guest disk filename containing a ':')
  - Resolves: bz#605704
    (qemu-kvm: set per-machine-type smbios strings)
  - Resolves: bz#607688
    (Excessive lseek() causes severe performance issues with vm disk images over NFS)


author: Eduardo Habkost <ehabkost@redhat.com> - qemu-kvm-0.12.1.2-2.84.el6
changelog:
  - kvm-Add-KVM-paravirt-cpuid-leaf.patch [bz#606084]
  - Resolves: bz#606084
    (Allow control of kvm cpuid option via -cpu flag)


author: Eduardo Habkost <ehabkost@redhat.com> - qemu-kvm-0.12.1.2-2.85.el6
changelog:
  - kvm-Remove-usage-of-CONFIG_RED_HAT_DISABLED.patch [bz#605638]
  - kvm-monitor-Remove-host_net_add-remove-for-Red-Hat-Enter.patch [bz#605638]
  - kvm-monitor-Remove-usb_add-del-commands-for-Red-Hat-Ente.patch [bz#605638]
  - kvm-virtio-blk-fix-the-list-operation-in-virtio_blk_load.patch [bz#607244]
  - kvm-QError-Introduce-QERR_DEVICE_INIT_FAILED_2.patch [bz#596279]
  - kvm-dev-assignment-Report-IRQ-assign-errors-in-QMP.patch [bz#596279]
  - Resolves: bz#596279
    (QMP: does not report the real cause of PCI device assignment failure)
  - Resolves: bz#605638
    (Remove unsupported monitor commands from qemu-kvm)
  - Resolves: bz#607244
    (virtio-blk doesn't load list of pending requests correctly)


author: Eduardo Habkost <ehabkost@redhat.com> - qemu-kvm-0.12.1.2-2.86.el6
changelog:
  - kvm-net-delete-QemuOpts-when-net_client_init-fails.patch [bz#603851]
  - kvm-QMP-Fix-error-reporting-in-the-async-API.patch [bz#587382]
  - kvm-QMP-Remove-leading-whitespace-in-package.patch [bz#580648]
  - kvm-Add-optional-dump-of-default-config-file-paths-v2-BZ.patch [bz#601540]
  - Resolves: bz#580648
    (QMP: Bad package version in greeting message)
  - Resolves: bz#587382
    (QMP: balloon command may not report an error)
  - Resolves: bz#601540
    (qemu requires ability to verify location of cpu model definition file..)
  - Resolves: bz#603851
    (QMP: Can't reuse same 'id' when netdev_add fails)


author: Eduardo Habkost <ehabkost@redhat.com> - qemu-kvm-0.12.1.2-2.87.el6
changelog:
  - kvm-qxl-drop-check-for-depths-32.patch [bz#597198]
  - kvm-spice-handle-16-bit-color-depth.patch [bz#597198 bz#600205]
  - kvm-device-assignment-Don-t-deassign-when-the-assignment.patch [bz#597968]
  - kvm-block-fix-physical_block_size-calculation.patch [bz#566785]
  - kvm-Add-x2apic-to-cpuid-feature-set-for-new-Intel-models.patch [bz#601517]
  - Resolves: bz#566785
    (virt block layer must not keep guest's logical_block_size fixed)
  - Resolves: bz#597198
    (qxl: 16bpp vga mode is broken.)
  - Resolves: bz#597968
    (Should not allow one physical NIC card to be assigned to one guest for many times)
  - Resolves: bz#600205
    (Live migration cause qemu-kvm Segmentation fault (core dumped)by using "-vga std")
  - Resolves: bz#601517
    (x2apic needs to be present in all new Intel cpu models..)


author: Eduardo Habkost <ehabkost@redhat.com> - qemu-kvm-0.12.1.2-2.88.el6
changelog:
  - kvm-Exit-if-incoming-migration-fails.patch [bz#570174]
  - kvm-Factorize-common-migration-incoming-code.patch [bz#570174]
  - Resolves: bz#570174
    (Restoring a qemu guest from a saved state file using -incoming sometimes fails and hangs)


author: Eduardo Habkost <ehabkost@redhat.com> - qemu-kvm-0.12.1.2-2.89.el6
changelog:
  - kvm-device-assignment-be-more-selective-in-interrupt-dis.patch [bz#605361]
  - Resolves: bz#605361
    (82576 physical function device assignment doesn't work with win7)


author: Eduardo Habkost <ehabkost@redhat.com> - qemu-kvm-0.12.1.2-2.90.el6
changelog:
  - kvm-device-assignment-Avoid-munmapping-the-real-MSIX-are.patch [bz#572043]
  - kvm-device-assignment-Cleanup-on-exit.patch [bz#572043]
  - Resolves: bz#572043
    (Guest gets segfault when do multiple device hot-plug and hot-unplug)


author: Eduardo Habkost <ehabkost@redhat.com> - qemu-kvm-0.12.1.2-2.91.el6
changelog:
  - kvm-doc-Update-monitor-info-subcommands.patch [bz#582262]
  - kvm-Fix-typo-in-balloon-help.patch [bz#582262]
  - kvm-monitor-Reorder-info-documentation.patch [bz#582262]
  - kvm-QMP-Introduce-commands-documentation.patch [bz#582262]
  - kvm-QMP-Sync-documentation-with-RHEL6-only-changes.patch [bz#582262]
  - kvm-Monitor-Drop-QMP-documentation-from-code.patch [bz#582262]
  - kvm-hxtool-Fix-line-number-reporting-on-SQMP-EQMP-errors.patch [bz#582262]
  - kvm-monitor-New-command-__com.redhat_drive_add.patch [bz#581963]
  - kvm-Fix-driftfix-option.patch [bz#611229]
  - Resolves: bz#581963
    (QMP: missing drive_add command in JSON mode)
  - Resolves: bz#582262
    (QMP: Missing commands doc)
  - Resolves: bz#611229
    (-rtc cmdline changes)


author: Eduardo Habkost <ehabkost@redhat.com> - qemu-kvm-0.12.1.2-2.92.el6
changelog:
  - build-time-only fix: fix the tarball-generation make-release script for newer git versions
    (kvm-make-release-fix-mtime-on-rhel6-beta.patch)
  - Related: bz#581963 bz#582262 bz#611229


author: Eduardo Habkost <ehabkost@redhat.com> - qemu-kvm-0.12.1.2-2.93.el6
changelog:
  - kvm-make-rtc-alatm-work.patch [bz#598836]
  - kvm-qemu-img-check-Distinguish-different-kinds-of-errors.patch [bz#612164]
  - kvm-qcow2-vdi-Change-check-to-distinguish-error-cases.patch [bz#612164]
  - Resolves: bz#598836
    (RHEL 6.0 RTC Alarm unusable in vm)
  - Resolves: bz#612164
    ([kvm] qemu image check returns cluster errors when using virtIO block (thinly provisioned) during e_no_space events (along with EIO errors))


author: Eduardo Habkost <ehabkost@redhat.com> - qemu-kvm-0.12.1.2-2.94.el6
changelog:
  - kvm-Revert-ide-save-restore-pio-atapi-cmd-transfer-field.patch [bz#612481]
  - kvm-vmstate-add-subsections-code.patch [bz#612481]
  - kvm-ide-fix-migration-in-the-middle-of-pio-operation.patch [bz#612481]
  - kvm-ide-fix-migration-in-the-middle-of-a-bmdma-transfer.patch [bz#612481]
  - kvm-Initial-documentation-for-migration-Signed-off-by-Ju.patch [bz#612481]
  - kvm-Disable-non-rhel-machine-types-pc-0.12-pc-0.11-pc-0..patch [bz#607263]
  - Resolves: bz#607263
    (Remove -M pc-0.12 support)
  - Resolves: bz#612481
    (Enable migration subsections)


author: Eduardo Habkost <ehabkost@redhat.com> - qemu-kvm-0.12.1.2-2.95.el6
changelog:
  - kvm-Move-CPU-definitions-to-usr-share-.-BZ-610805.patch [bz#610805]
  - kvm-QEMUFileBuffered-indicate-that-we-re-ready-when-the-.patch [bz#609261]
  - kvm-device-assignment-Better-fd-tracking.patch [bz#611715]
  - Resolves: bz#609261
    (Exec outgoing migration is too slow)
  - Resolves: bz#610805
    (Move CPU definitions to /usr/share/...)
  - Resolves: bz#611715
    (qemu-kvm gets no responsive  when do  hot-unplug pass-through device)


author: Eduardo Habkost <ehabkost@redhat.com> - qemu-kvm-0.12.1.2-2.96.el6
changelog:
  - fix some errors in ksmd.init [bz#570467]
  - fix some errors in ksmtuned.init [bz#579883]
  - kvm-Add-x2apic-to-cpuid-feature-set-for-new-AMD-models.-.patch [bz#613884]
  - Resolves: bz#570467
    ([RHEL 6] Initscripts improvement for ksm and ksmtuned)
  - Resolves: bz#579883
    (init script doesn't stop ksmd)
  - Resolves: bz#613884
    (x2apic needs to be present in all new AMD cpu models..)


author: Eduardo Habkost <ehabkost@redhat.com> - qemu-kvm-0.12.1.2-2.97.el6
changelog:
  - kvm-block-Fix-early-failure-in-multiwrite.patch [bz#602209]
  - kvm-block-Handle-multiwrite-errors-only-when-all-request.patch [bz#602209]
  - kvm-migration-respect-exit-status-with-exec.patch [bz#584372]
  - kvm-set-proper-migration-status-on-write-error-v3.patch [bz#584372]
  - kvm-Set-SMBIOS-vendor-to-QEMU-for-RHEL5-machine-types.patch [bz#614377]
  - kvm-Don-t-reset-bs-is_temporary-in-bdrv_open_common.patch [bz#611797]
  - kvm-Change-default-CPU-model-qemu64-to-model-6.patch [bz#614537]
  - kvm-set-model-6-on-Intel-CPUs-on-cpu-x86_64.conf.patch [bz#614537]
  - kvm-vhost-fix-miration-during-device-start.patch [bz#615228]
  - Resolves: bz#584372
    (Fails to detect errors when using exec: based migration)
  - Resolves: bz#602209
    (Core dumped during Guest installation)
  - Resolves: bz#611797
    (qemu does not call unlink() on temp files in snapshot mode)
  - Resolves: bz#614377
    (Windows 7 requires re-activation when migrated from RHEL5 to RHEL6)
  - Resolves: bz#614537
    (Skype crashes on VM.)
  - Resolves: bz#615228
    (oom in vhost_dev_start)


